DRiFTiNGHETTOKiD
07-12-2012, 11:58 AM
I have a set of anodized grayish/bronze colored Kinesis K18 wheels. They're very lite weight(approximately 18Lbs) 3 piece modular wheels. Two of the The wheels are in good shape, but has lite curbings, and little nicks on them. The first two are good/excellent once polished up. The other two also have curbings, and pothole bends on the lips. The last two wheels will/should be replaced or repaired. But I ran them in the rears, and hold air no wobbling. The rear barrels seems to be round, and true(except for wheel #2 has a slight pot hole flatspot). The wheels does not come with center caps. I measured the overall width to be 8 5/8". The rear barrels measures roughly 6.5", and lips are about 1.5".
All four wheels have been balanced with tires with no issues. All four wheels have oxidations, and brake dusts, and lite pitting(on backside). But overall in good shape for custom rebuild projects. It seems the wheels have never been split.
If your looking for show quality Kinesis wheels, then this FS thread is not for you, and go buy brand new. BUT if your looking for custom/classic/high dollar wheels for cheap/low price and getting bigger lips, then this is it. The original owner of the car I purchased said they were Kinesis wheels, but the wheels does not have any markings stating Kinesis wheels. By googling Kinesis K18, visually it identified that the wheels are Kinesis made. The offsets are not marked on the wheels. I took overall width of 8 5/8 and 6" backspacing into an offset calculator, and It came out to be et32.
I've recently seen online. The same wheels, and looks like same conditions are going for $1500/asking.
I will ship/insure at buyers expenses. Paypal is also accepted.
please feel free to txt or call me between 7am-8pm at 801-879-035zero. I can send additional pictures.
All four wheels have been balanced with tires with no issues. All four wheels have oxidations, and brake dusts, and lite pitting(on backside). But overall in good shape for custom rebuild projects. It seems the wheels have never been split.
If your looking for show quality Kinesis wheels, then this FS thread is not for you, and go buy brand new. BUT if your looking for custom/classic/high dollar wheels for cheap/low price and getting bigger lips, then this is it. The original owner of the car I purchased said they were Kinesis wheels, but the wheels does not have any markings stating Kinesis wheels. By googling Kinesis K18, visually it identified that the wheels are Kinesis made. The offsets are not marked on the wheels. I took overall width of 8 5/8 and 6" backspacing into an offset calculator, and It came out to be et32.
I've recently seen online. The same wheels, and looks like same conditions are going for $1500/asking.
I will ship/insure at buyers expenses. Paypal is also accepted.
please feel free to txt or call me between 7am-8pm at 801-879-035zero. I can send additional pictures.