View Full Version : Signal light and hazard light problems
ogs14
07-08-2012, 03:53 PM
So when I turn my signal light on it turns n all my lights as if it was hazard lights Im not entirely sure what I should be checking for. And when my lights are on at night my rear signal lights stay on as well. Any help would be great I'm horrible at electrical shit too
lighter
07-08-2012, 06:00 PM
have you done anything with wiring ur lights?
fliprayzin240sx
07-08-2012, 06:28 PM
WHat? Might wanna explain and type that clearer...
ogs14
07-08-2012, 07:58 PM
have you done anything with wiring ur lights?
No I just put in some led bulbs that's all
zooopreme
07-08-2012, 08:04 PM
No I just put in some led bulbs that's all
And there we go.
Read up on the difference between the bulbs used for OEM lights vs LED
ogs14
07-08-2012, 09:05 PM
That can't be the problem I just swapped in new bulbs and still the same
lighter
07-09-2012, 07:14 AM
sometimes bulbs cause problems if u dont use the right one.. i learned that the hard way cause i put in an led bulb on my turn signal and it was doing crazy stuff to my dash panel.. and didnt know y.. so i just used a regular bulb
ogs14
07-09-2012, 09:06 AM
sometimes bulbs cause problems if u dont use the right one.. i learned that the hard way cause i put in an led bulb on my turn signal and it was doing crazy stuff to my dash panel.. and didnt know y.. so i just used a regular bulb
O
Yeah I have led in my tails too. And it makes my whole dad panel flash when I signal
Psychomoongoose
07-09-2012, 09:09 AM
o
yeah i have led in my tails too. And it makes my whole dad panel flash when i signal
what the fuck
zooopreme
07-09-2012, 09:36 AM
LED bulbs do NOT put out the same power as the standard bulb. The cars way of letting you know a bulb is out or has a lack of power is by flashing sporadically.
Since you have LED bulbs all over, that's probably what's causing everything to not work properly.
If you start using standard bulbs and it's still messed up. Check the wiring every where.
lighter
07-09-2012, 08:42 PM
LED bulbs do NOT put out the same power as the standard bulb. The cars way of letting you know a bulb is out or has a lack of power is by flashing sporadically.
Since you have LED bulbs all over, that's probably what's causing everything to not work properly.
If you start using standard bulbs and it's still messed up. Check the wiring every where.
pretty much stick to regular bulbs makes life easier
ogs14
07-09-2012, 09:30 PM
pretty much stick to regular bulbs makes life easier
yeah i switched out my leds for the right bulb type and my car stopped acting up but now the left light blinks faster than the right but its not burnt out cause there new. what would cause that?
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.