RB25DET swap for sale/part out

[Landcruisin60]

Hey, I bought an RB25 swapped S14, when I bought it was running, but not very well. I started pulling things apart and came to the conclusion the engine needed to be torn down. So I pulled it apart, turns out as far as I can tell the engine is toast. The crank wore against the main caps (thrust issue). The cylinders have some wear, as do what I was told were aftermarket forged pistons. There's also some wear on some of the cam bearings. I decided rather than try and find another RB and then build it I'd rather just swap in an LSx and be done.

Basically what you're getting:
RB25DET stripped down to a bare block
-The internals may or may not be usable, my uneducated assumption is they cant be used.
-Does have ARP head studs!
Intake manifold, TB etc
Exhaust manifold with turbo. (The entire exhaust may be for sale too) Turbo SOLD
Turbo inlet, MAF and filter
RB25DET transmission
Stock flywheel
ACT springless 6 puck clutch. (Pretty worn, there's still life left in it, how much? Not sure)
FMIC with piping (ebay brand core)
What I believe to be Mckinney mounts and 1 piece steel DS Mounts SOLD
Wiring harness and ecu (not sure who did the harness, but it has some extra/random wires)
All the fasteners are bagged and tagged

Probably some other things I'm not thinking of. Basically selling everything related to the RB swap.

Like I said, it was running when I got it but not well. I was told it was running and driving at one point. From what I could tell the transmission functions fine, but I only drove it onto a trailer, then off a trailer and into the garage. So I dont really know.


I'm looking to get $2000 obo for everything listed. Willing to ship, but buyer pays for it. Everything is sold as-is. I also have a set of F&R z32 brakes I'm thinking of selling.

Here are some pictures...
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-45.jpg
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-46.jpg
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-47.jpg
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-48.jpg
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-49.jpg
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-50.jpg
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-51.jpg
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-52.jpg

Various pictures of the internals...
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-44.jpg
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-43.jpg
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-42.jpg

[MURPHY]

Seen your post else where also, that poor lack of oil ha. Hard to tell by pics but looks pretty bad

I'd be interested in the harness, ECM and mounts. Id like to see the harness fabrication (or lack) and know more about the condition. Know the model # off ECM.

Are the motor mounts blue, black or?

[hungryjoseph]

Do you have the knock sensor harness? If so i'll buy it. Email me with your price and paypal. I'm in the DC metro area. [email protected]

[Landcruisin60]

Seen your post else where also, that poor lack of oil ha. Hard to tell by pics but looks pretty bad

I'd be interested in the harness, ECM and mounts. Id like to see the harness fabrication (or lack) and know more about the condition. Know the model # off ECM.

Are the motor mounts blue, black or?

I'll get you some pictures of the harness tomorrow. I'm a hardcore noob with this RB stuff, but there were some extra plugs, and a few wires not connected to anything.

The mounts are blue, they have some rust and missing powdercoat. Could use a quick cleaning and some fresh paint.

Do you have the knock sensor harness? If so i'll buy it. Email me with your price and paypal. I'm in the DC metro area. [email protected]

Is that the harness under the intake manifold?

[RB_Powered_S13]

clutch fan?

[Landcruisin60]

Sorry, it had an e fan.

[RB_Powered_S13]

Sorry, it had an e fan.

oh kool thanks though,
BUMP!

[RB240Coupe]

interested in turbo if still up for grabs?
shipped to 24277??

[Landcruisin60]

Still have the turbo, it has some in and out play, but barely any side to side. I'd do $90 shipped for it. Do you want the water and oil lines also? It doesnt come with the o2 housing, thats pending locally.

If my prices seem off or anything let me know. Before I bought this car last week I had no knowledge or RB's and very little knowledge of Nissans.

Here's a picture of the turbo..
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-56.jpg

[moonshinekouki]

bumb for a honest seller

[S13Point5]

do you have the power steering pump? if so how much shipped to 45410?

[RB240Coupe]

im good with that. Do you accept paypal?

[slow.ek.hb]

send me some pics of the driveshaft and is your car abs or non abs??

[Srk2vane]

How much for the intercooler and piping shipped
To 77053?

[Mjc24]

How much for the trans?

[Landcruisin60]

Do you have the knock sensor harness? If so i'll buy it. Email me with your price and paypal. I'm in the DC metro area. [email protected]

The plugs are broken and were held on by zip ties. Sorry.


Here are some pictures of the mounts and DS. Both have surface rust, but the structural integrity hasnt been compromised. The u-joints move smoothly and dont have any play.

http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-57.jpg
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-58.jpg
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-59.jpg
http://i234.photobucket.com/albums/ee176/Landcruisin60/drifty%20rig/photo-61.jpg

Looking for $225+ shipping for the mounts and $200+ shipping for the DS

[slideslidegnarslide]

Willing to sell the trans to engine braces

[Landcruisin60]

Willing to sell the trans to engine braces

Sorry, it didnt have any.

[Landcruisin60]

First bump

[Landcruisin60]

Last bump and then I'm bringing everything to the scrap yard to make room...

[Srk2vane]

So no on the intercooler and piping?

[s13_rb25]

Weird Request, but i need the rubber piece on the calve cover (intake side) that the pcv valve sits in if its not cracked... i dont have one.

[Landcruisin60]

So no on the intercooler and piping?

Shoot, thought I sent you a PM

Weird Request, but i need the rubber piece on the calve cover (intake side) that the pcv valve sits in if its not cracked... i dont have one.

I'll have to check that, it had some sort of breather set up on the valve covers.

[gearhead55]

Is the dip stick handle un-cracked? If so could I buy the dip stick off you, shipped to california 91011? And the turbo if the other buyer flakes...

[lgsr20swap]

I pm u a questions

[hosmer]

how much for the trans...I can pick it up

[s13_rb25]

Anything on PVC valve thing yet?

[Amandrews]

put it back together and ill buy it for $200 lmao

[g0dspeed_mat]

pm sent to your inbox

[Landcruisin60]

Is the dip stick handle un-cracked? If so could I buy the dip stick off you, shipped to california 91011? And the turbo if the other buyer flakes...

Sorry, its cracked right next to the o-ring.

Anything on PVC valve thing yet?

Sorry, I managed to tear it when I pulled it out.

[gearhead55]

Sorry, its cracked right next to the o-ring.


shiiiit, why does that always happen? thanks anyway

[GreenMNTDC5]

where in VT are you located?

[widebody92]

ill take the transmission mount bracket and the ds off of your hands..

[sexcii-zenki]

Interested in trans, ds, mounts, and the drain that goes from the left side of he head down to the block...willing to meet u half way if the price is right

[Michaelwinne]

Still have that block/trans adapter thingy?

[TATE843]

how much for starter shipped to 29464 and do you have a down pipe? pm me

[bkt808]

is that a s1 maf? does it work? how much shipped to 96793

[dcreech0]

pm me a price of the tranny dust shield, starter and the stock im/tb....

[teddyjr]

valve covers and maybe plug cover to 33703?

[fearlessKouki]

how much for IC setup shipped to 44139