s14 sensor identification help

[hamizle]

Thanks for everyones help. The sensor was identified but my problem is beyond that.... so mods please lock this thread.

[hamizle]

And the sensor appeared to be inside the intake system.. although the hole looked modified..

[hamizle]

Ssssssssssss

[mendozasport]

it looks like the air temp sensor , but my 96 doesnt have it and it runs fine, not sure what year is yours or if its something OBD2 cars need

[hamizle]

it looks like the air temp sensor , but my 96 doesnt have it and it runs fine, not sure what year is yours or if its something OBD2 cars need

It's a 98 and thanks I will look into that!

[JasianBlazin]

yes that's your IAT sensor. it plugs into your stock air box.
your car will run without it plugged in. so if its not running the problem is elsewhere.

[zneubauer]

air temp. idk why it wouldnt run though.

[silver350z05rb]

yes, the car will run without it, you'll just have a check engine light, 95-96 and 97-98 are different sensors with different connectors, so a 95 air sensor will not fit a 97 connector. just an FYI

[hamizle]

Thank you everyone for your help! I replaced it and the car still doesn't run. When I first plugged the sensor in it started fine and was idling fine, I sat in the car and went to rev it up and it began to choke sputter and finally die. Now when I go to start the car it fires a few cylinders but does not idle. The car has spark and fuel so I'm not sure what the problem is... I'm kind of thinking the maf? I took a maf out out of my dads altima (99) and plugged it up but it seemed it didn't help. Is their a way I can check the maf wiring to make sure its not cut anywhere? I really appreciate all your help guys.