TATE843
07-01-2012, 11:54 PM
Ok so i had to rebuild the top end of my KA pretty much. swapped the transmission to a five speed and am running the auto ECU because i was under the impression it would be fine that way. got it all back togther now and it starts and jumps to about 1500-2000 rpm then dies but if i give it gas it will keep running and runs well in the top end. But if i uplug the MAF and start it it will hold at 2000 rpms steady and runs relatively well. i've checked all MAF wires and they are fine cleaned and tested iacv and check for vacum leaks with the hookah smoke smoke test (totally worked found two like that). ive place at TDC and set the rotor plenty of times lobes on cams are perfect. ive swapped ecu, wires, mafs the #4 injector checked all the injector gaskets. EGR has been deleted also. I pulled the plugs and apparently its super rich they are wet with gas. IM AT A LOSS! any help would be greatly appreciated haha i swear my car hates people