How to wire JDM turn signals + sidemarkers on a s14 zenki

[bigstick]

so i just installed my origin aero, and now i need to wire up the turn signals and sidemarkers, which are JDM. I have the bulbs for both already, but i need the sockets and pigtails. Does anyone know if the s14 zenki jdm turn signals/sidemarkers sockets and pigtails are the same as the USDM ones? thanks
My turn signals - http://www.frsport.com/Circuit-Sports-Crystal-Clear-Front-Turn-Signal-Lights-S14-Zenki_p_26220.html
sidemarkers - http://www.frsport.com/Circuit-Sports-Clear-Side-Marker-Light-S14-Zenki_p_26224.html

[eek]

Why do you need to wire them up? The usdm zenki has both turn signals and side markers on the bumper factory. Those are not JDM, just looks like clear turn signals. From what it looks like the socket from your OEM turn signals should fit right into those China made clear turn signals.

[niteridaz503]

^
Ditto, just use your old sockets & harness with those turn signals & markers

[bigstick]

i do not have the old sockets anymore, thats why i wanted to make sure the usdm sockets and pigtails would work before i order a set. origin is jdm, so the bumper requires jdm turn signals and markers which are a little bigger than usdm ones. anyways im gonna go to a junkyard and try to find a set of sockets, thanks guys.

[S14Driftr91]

Yea the usdm wiring and sockets are the same as the jdm. The side markers are even the same size, only difference with them is the oem jdm side markers protrude from the bumper as to oem usdm side markers sit flush with the bumper. As for the turn signals the jdm are shorter in length than the usdm ones.

[bigstick]

thank you so much!

[JasianBlazin]

from what i was told, the bulb sockets don't fit.
even though circuit sports isnt JDM, they require the same sockets the JDM needs.
I don't know the bulb sockets that fit, but if someone can chime in i'd appreciate it for when I run aero.

edit: i totally misread, thought this was a KOUKI.

[bigstick]

jasian are you sure? damn this sucks :/

[bigstick]

SOCKET ASSY-TURN SIGNAL LAMP - 240SX (S14) 1995-1998 :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com (http://www.courtesyparts.com/26124m-socket-assy-turn-signal-lamp-240sx-s14-1995-1998-p-135807.html)
i was hoping these would work

[s14canyoncity]

i do not have the old sockets anymore, thats why i wanted to make sure the usdm sockets and pigtails would work before i order a set. origin is jdm, so the bumper requires jdm turn signals and markers which are a little bigger than usdm ones. anyways im gonna go to a junkyard and try to find a set of sockets, thanks guys.

dude OE should work just fine, i'm running the same side marks and blinkers. i dont recall changing the sockets at all just the light bulbs to make them amber.

also are you stating that the light are bigger or the socket. (lights) side markers are the same size and the origin blinkers are smaller than USDM hence the "JDM" since they fit Navan/Zenki JSPEC bumper etc.

[JasianBlazin]

jasian are you sure? damn this sucks :/

no i misread, i thought your car was a kouki. yeah oem zenki bulbs will work.

[eek]

i'm sure you can go to any junkyard and find pigtails for your car instead of ordering them and paying a stupid amount of $$$ for stuff you could get basically free from the yard. Heck there are a few people parting their cars out in the For Sale section. PM the guys and ask how much they want for the pigtails. The side markers on the bumper are the universal wedge style socket/pigtail which is very common on all nissans.