KA24de-T p0100 Help, newbie to nissans

[Gmillz85]

97 ka24 with a t3/t4, 550 inkectors etc. its tune with an apexi neo. While i was waiting for my buddy i shut the car off and played around with the settings while i was waiting. I dodnt change any maps pr anything, at least not that im aware of, and when i turned her on she had a rough idle, and threw the CEL for a p0100. Now she idles rough and dies when i come to a stop. Normal driving the a/f is perfect, and she runs like normal, but come to a stop she sputs and shuts down. Any help would be greatly appreciated, this something i can fix woththe apexi?

[S13MATT]

have you check all your vacuum lines?

[Gmillz85]

Not yet i limped her home and had to run out.

[S13MATT]

also make sure your MAF is connected

[Gmillz85]

Ok ill check that too, im pretty sure it is, unless it somehow popped off

[Gmillz85]

My tune got wiped out of the apexi. I have 0s for everything. Obviously going to have to be taken to get retuned. Is there a set of nunbers i can run to drive her to get tuned, or tow her and tune her. I dont want to risk burning valves, misfiring and whatnot

[S13MATT]

Yeah you should just tow it to get tuned. Have you looked into a ROM tune? I'm not a big fan of Apexi Safc.

[Gmillz85]

No i havnt. Go a website or some info? I figure ill just have them tune the apexi since its already there. Maybe later on down the road run somethin different

[S13MATT]

Check out KA--T.org they have lots of information regarding tunes. I hear RS enthalpy is pretty good, I'm sending my ecu to them in a couple of weeks