PDA

View Full Version : Replaced knock sensor, mounted it on the Intake Manifold.


frifox
06-23-2012, 03:00 AM
My old knock sensor apparently got cracked so I bought a replacement. Installing the new one back on the block is a royal pain so I found a place on the intake manifold where the knock sensor fit quite nicely. in fact, it fit so perfect that you'd think it was supposed to be there to begin with (see the pic, sensor is right in the middle of it)

http://i.imgur.com/MgE61.jpg

will the knock sensor still detect knocks when they happen even when it's mounted on the intake manifold?


ps: stock ka24de on a '95 s14.

PureRush
06-23-2012, 04:21 AM
No........

Rut Ro
06-23-2012, 05:35 AM
Negative. Mount it in the proper place please. For your own piece of mind.

SHIFTrl240
06-24-2012, 12:44 AM
You are probably better off not even using a knock sensor than mounting it this way.

frifox
06-24-2012, 12:49 AM
You are probably better off not even using a knock sensor than mounting it this way.

at least ecu isn't throwing a code this way :D

thanks all for the feedback. looks like tomorrow the sensor is going back to it's original location.

jr_ss
06-24-2012, 04:27 PM
It's not going to read Knock on your intake manifold lol... Put it on the block and be done with it.

future
06-24-2012, 04:28 PM
Really? Zilvia, you never sease to amaze me

frifox
06-24-2012, 04:30 PM
Really? Zilvia, you never sease to amaze me

glad to provide the entertainment :l101:

KiLLeR2001
06-24-2012, 05:07 PM
LOL. Time to pack your bags, you're moving to Florida bud.

delado
06-24-2012, 05:18 PM
LOL. Time to pack your bags, you're moving to Florida bud.

:picardfp::picardfp::picardfp::picardfp:

http://theconservativetreehouse.files.wordpress.com/2012/01/welcome20to20florida.jpg

future
06-24-2012, 05:24 PM
Ahahah

Thanks for the new quote killer2001

Sileighty_85
06-24-2012, 05:42 PM
http://i73.photobucket.com/albums/i235/Neil_85/Gifs/Punch2.jpg

kawasa
07-06-2012, 02:08 AM
My old knock sensor apparently got cracked so I bought a replacement. Installing the new one back on the block is a royal pain so I found a place on the intake manifold where the knock sensor (http://www.car-stuff.com/knocksensor.htm) fit quite nicely. in fact, it fit so perfect that you'd think it was supposed to be there to begin with (see the pic, sensor is right in the middle of it)

will the knock sensor still detect knocks when they happen even when it's mounted on the intake manifold?


ps: stock ka24de on a '95 s14.

Unfortunately it won't. Found that the hard way. Good thing you decided to return the knock sensor before it knocks you out, lol. I know it's corny.

frifox
07-06-2012, 11:28 AM
Unfortunately it won't. Found that the hard way. Good thing you decided to return the knock sensor before it knocks you out, lol. I know it's corny.

Yeah I did... went to Home Depot and bought a 2ft flexible screw grabber (http://www.homedepot.com/Tools-Hardware-Hand-Tools-Specialty-Hand-Tools/h_d1/N-5yc1vZc1zi/R-202025673/h_d2/ProductDisplay?catalogId=10053&langId=-1&storeId=10051) and a 3/8th drive extension. After 30 mins of fishing I managed to mount the sensor back to its original location. The trick was to secure the socket to the drive with tape and to drop a piece of magnet into the socket to keep the screw from falling out. After that it was a piece of cake :naughtyd:

soryu
07-16-2012, 08:26 PM
so why florida??

ivantheterribl3
07-16-2012, 09:55 PM
I finally made an account for the SOLE purpose of telling you what a retard you are. That is all. You may ban me now.

landins13
07-17-2012, 07:00 AM
HAHAHA Ivan thats terrible.