Cranks but wont start

[Da240]

What up Zilvia, im new here so bare with me. Just got a SR20 swap car ran flawless for about 2 day. Now I have to reconnect the injector one by one while someone cranks it to get it started. Any help would be great thanks.

[slider2828]

did you put in the fuel lines correctly?

[Da240]

Not sure had it put in at a shop, but now im 350 miles away.

[zneubauer]

Look up the fuel line diagram and see if they screwed up.

[slider2828]

Take pictures man... we going in blind..... Clear hi res pictures are key in good day light.

Seriously take it back to the shop and say WTF.....

[Da240]

Ok ill look up the diagram and get right on the pics. Thanks

[Bentleyness]

Um why would a reversed fuel line make a car run fine for two days then not at all?
I say u have a flooding issue. Try cranking ur car with the fuel pump fuse out if it starts u got a flood issue.. its works the same way as you doing with the clips but easier

[Da240]

I was thinking the same thing but im trying everything!! Thanks I'll try that now.

[Da240]

Ok I took the EGI fuel fuse/relay out car started just fine. Of course it cut of once all the fuel was burned out of the cylinder. Making progress

[Da240]

??? Car's starting just fine now????

[Bentleyness]

U turned car on and off a few times? Issue is gone? Also the o2 can cause rich issues on start ups so maybe need new o2? I would invest in a lc-1 wideband. It has two out puts one for wideband readings and it also simulates narrowband. Best investment I made really.

[ka4life87]

Check the o rings for the fuel injectors, if they are bad it will flood the engine as fuel will leak past o rings

[Da240]

3 out of 5 times. Ill check the injectors and look into lc-1. I really appreciate the help.

[Bentleyness]

When u replace orings don't use the home depot or ace stuff they don't last to long I used some and when out 200miles later. It was a temp when I used it had to order mine from Subaru since I'm using there 550cc on my ka-t

[Bentleyness]

O and to see if there leaking u used 4water bottles empty ones and taped it to each injector then prime the car. Of course with fuel rails out and before u bolt them on with new seals test them again to make sure good luck also lube the orings. Taking the injectors out is a b just a heads up.

[Da240]

Ok ill let you know how it works out thanks a lot.

[Da240]

/Volumes/NO NAME/DCIM/100CANON/IMG_9101.JPG

[airman]

^ lol what