replacing fuel lines, need info

[dkim1985]

So i'm slowly replacing old hoses and etc on my s13 KA24DE and currently at the fuel lines.

Is this ok to use this to replace the oe hoses/lines and fit the stock hard lines with just clamps?
STAINLESS STEEL/NYLON BRAID 15KPSI AN6 6AN BLACK OIL/FUEL LINE/HOSE BY FOOT/FEET | eBay (http://www.ebay.com/itm/160784770144)

Also, changing the fuel filter to a new Z32 filter..
i don't need any adapters or anything?

[SHIFTrl240]

I would just use actual rubber fuel hose from a parts store than trust ebay hose for a fuel line, but if it is the right size i don't see why it wouldn't work.

As far as the z32 filter, no adapters needed, the fittings are the same as the oem one.

[dkim1985]

I would just use actual rubber fuel hose from a parts store than trust ebay hose for a fuel line, but if it is the right size i don't see why it wouldn't work.

As far as the z32 filter, no adapters needed, the fittings are the same as the oem one.

koo thanks man.
so that "-6an" fitting is the correct hose size?