Question about rb20det into s13 wiring

[Majorwood76]

Ok so I'm splicing in the grey oval plug to the rb harness I can't figure out where the black and white wire goes (ecu power) I wired the red one which is ecu constant power so do not use this wire? And also off the oval plug there's a ground do I just ground it to the chassis or what? Thanks for your input I've searched and searched came up with nothing

[greenwood]

RB20DET Wiring Guide For Dummies (http://www.nicoclub.com/archives/rb20det-wiring-guide-for-dummies.html)

[Majorwood76]

Yea I've read that no where does it say about the wire I'm talking about I'm going to assume its not needed...

[greenwood]

I would wire without and see what happens. I used that diagram and another when wiring. If you are still having problems come Monday update this thread and I will check out my wiring. Be sure to wire the resistor for the alternator

[Majorwood76]

Hey thanks for the input I didn't see anything about the resistor I'll have to check it out