PDA

View Full Version : GTO 5 Lug what bearings?

GT Motion
06-12-2012, 09:02 PM
I need to replace a wheel bearing and my friend who sold me the car said he did the GTO hubs with bearings. Does anyone know which wheel bearing I need? Maybe s14?
az_240
06-12-2012, 10:27 PM
GTO might be the brand of hubs he used.....

S14 bearing is integrated into the hub so you need to get them as 1 piece. If you have S14 front knuckles you will need S14 front hubs.
GT Motion
06-13-2012, 07:48 AM
GTO might be the brand of hubs he used.....

S14 bearing is integrated into the hub so you need to get them as 1 piece. If you have S14 front knuckles you will need S14 front hubs.

Thats what he said, he said they are the "JDM GTO hubs". This is on an S13 btw, I guess I will have to take things apart to see what I'm workin with.
upsdude
06-13-2012, 09:01 AM
the only jdm gto ive heard of is the jdm mitsu 3000gt..that doesnt sound right
NismoSilvia270R
06-17-2012, 10:05 PM
what knuckles do you have? were they swapped?

best bet is whatever knuckles you have, the bearings will match.

ex. my front 5lug conversion hubs made by "s5" fit my s13 knuckles... and they use factory s13 bearings.


it will be important for you to tell us whether you are talking about the front or rear hubs.
front - you can replace just the bearings.
rear - you typically buy new hubs.
GT Motion
06-23-2012, 11:15 AM
the only jdm gto ive heard of is the jdm mitsu 3000gt..that doesnt sound right

You can see GTO hubs mentioned in these links.

Nissan 240SX Performance Modification/4 lug to 5 lug conversion - Wikibooks, open books for an open world (http://en.wikibooks.org/wiki/Nissan_240SX_Performance_Modification/4_lug_to_5_lug_conversion)

FS: GTO S13 Front 5 Lug Adaptor - S-Chassis.com (http://www.club240.com/forums/showthread.php?p=140177)

I just need to swap out the front wheel bearing.
davinci
06-24-2012, 07:02 AM
gto is an aftermarket hub like attain. if your running s13 you can swap the bearing. just get an s13 bearing.
GT Motion
06-24-2012, 12:48 PM
gto is an aftermarket hub like attain. if your running s13 you can swap the bearing. just get an s13 bearing.

Thanks man, thats what I thought I just wanted to check to see if anyone else knew before I get started.