PDA

View Full Version : wtb sr20det crankshaft


aearl34
06-08-2012, 11:32 PM
need an sr crankshaft after the idiot i got my motor/tranny from didnt tighten the flywheel bolts and stripped the bolts on the crank
let me know what you got
thanks

JDMRIDDAZ
06-09-2012, 09:00 AM
hey u can use a fwd sr20 crank
u can get these from the autoparts store...
just get a std one not .25 under and u r good..
if not good luck...
i had the same problem..but i had an extra crank...

Shift n Drift
06-11-2012, 02:21 PM
got one, at the shop already, can have it polished and have him order correct bearings for you

aearl34
06-12-2012, 11:55 AM
got one, at the shop already, can have it polished and have him order correct bearings for you

how much for it?

aearl34
06-12-2012, 11:58 AM
JDMRIDDAZ thanks for the info i might end up doing that if i cant find one. any idea on what hp numbers the sr20de cranks are good for im building my bottom end now. wiseco pistons and manley rods and will be building the head next winter. only reason i had to get new bottom end parts is because #4 cylinder was melted

JDMRIDDAZ
06-12-2012, 12:13 PM
there pretty much the same crank either way
it should handle close to 500hp

richrosco
06-12-2012, 12:27 PM
hey u can use a fwd sr20 crank
u can get these from the autoparts store...
just get a std one not .25 under and u r good..
if not good luck...
i had the same problem..but i had an extra crank...


PLEASE don't do that, I had a FWD crank shaft and it fucked up everything, I had to do a 100% rebuild. trust me brother get a RWD. I am not talking shit but just advice.

Shift n Drift
06-12-2012, 01:17 PM
how much for it?

Hhmm
Let's say 100 for crank,
40ish for a polish
120ish for bearings and
40ish to ship good to slap in and go

aearl34
06-14-2012, 01:50 PM
Hhmm
Let's say 100 for crank,
40ish for a polish
120ish for bearings and
40ish to ship good to slap in and go
alright well give me a few days i am not home until saturday and havent heard anything on how my crank is. ill tell my buddy to call and see how it is and if its not repairable ill more then likely get it. i should be able to let you know in a day or 2

Shift n Drift
06-14-2012, 01:52 PM
ok let me know asap, cause he's a lil busy

rebornS14
06-19-2012, 12:24 AM
i have one that spun a rod bearing so it has to be micropolished. $120 shipped.

aearl34
06-19-2012, 09:50 AM
ok let me know asap, cause he's a lil busy

Are the bearings standard sized? There is nothing wrong with it?

s15lover
06-20-2012, 10:37 PM
Txt me I've got a good one that needs nothing 8656049443

Mrpopo
06-23-2012, 02:17 PM
I've got a good one $150 shipped. It measures good. Let me know

aearl34
06-25-2012, 10:34 AM
Txt me I've got a good one that needs nothing 8656049443

still got the crank?