turbo reinstall

[NJdrift]

Hey all, I'm still kind of a newb with alot of the technical aspects but I'd like to learn and gather advice so here goes:
I bought a 95 240 with a sr20det blacktop motor installed with a greddy intercooler, a garret gt30 turbo and a cheap exhaust manifold. The engine was never tuned properly so after driving it for about a year, it stopped running. after some troubleshooting i found the maf was not working properly and also the turbo looks to be blown. So now I'm trying to decide where to go from here. I'm thinking of getting a smaller turbo to fit my driving style and HP goal of 320-350. Basically I'm looking for any advice on what kind of a turbo setup to get. $ is not a problem.

[Rut Ro]

GT2871R for a comfortable 320 to 350ish power band. Get a MAP ECU tune. Stick with a bottom mount manifold. You'll be fine. Start with the popular websites. FRsport, Enjuku, ect. Good luck with the build.

[NJdrift]

Thank you I'll update in a few weeks.

[tabasco122]

2871 all the way. i just pulled mine off, and even though i only ran it at wastegate boost, it was quick, with a lot of potential. perfect turbo for these motors. you can find a few used on here in the FS section, including mine. they build boost before 4k, and can get up to about 400hp with cams and fuel.

[K_style]

a greddy intercooler, a garret gt30 turbo and a cheap exhaust manifold. The engine was never tuned properly so after driving it for about a year, it stopped running.

Get rid of that POS cheap exhaust manifold and get stock one or since $ is not the issue for you, I'd get Fullrace or Mazworx or DOC racing etc manifold. Of course you could get Extrude Honed + External wastegate for stock manifold which I think it would be the best option.

Put 2871r and get Power FC and get good tune.

That's all you need.