flybye
05-21-2012, 08:46 PM
That's right...the tim has come to step away from the car. I just have no motivation to finish the car nor do I have the means to do so anymore. So I plan to sell off everything I have for this car and pick up another rwd toy to just tinker with. All prices are negotiable and I am not really looking for any trades asided from the stock parts that I need for the chassis to stay rolling.
First off is the chassis. Which is a 91' hatchback with a clean title and ZERO rust!!! I can include or remove any of the parts in this ad for an adjusted price. Or else it will be coming with mostly stock parts and what I have listed.
Things it has:
6 point cage w/ door bars (not the best welds)
Walbro 255lph fuel pump
Crack free dash and console
working e-brake with drift button
Forced fab modded knuckles (55* or so of angle)
AIT M4 Aggressive Aero (full kit) cracks here and there, but mostly partially repaired
1 spare AIT M4 rear bumper (only mounted and moved around the garage)
Engine bay and inteior have been recently sprayed black with floor truck bed lined
front fender wells, frame rails and trans tunnel undercoated
Things it needs:
Drivetrain
Body harness (I cut the old one out, but still have it)
Tie rods
Fenders
Wheels
Seat
Steering wheel
Windshield
whatever else you want to put on it
$1200 OBO
http://i9.photobucket.com/albums/a88/seandb20/2012-02-03_15-11-06_707.jpg
http://i9.photobucket.com/albums/a88/seandb20/269064_695786711197_50612135_34947182_380728_n.jpg
http://i9.photobucket.com/albums/a88/seandb20/281531_695800852857_50612135_34947340_5259106_n.jp g
And off the the parts!
-Kaaz 2 way differential $700
-Fortune Auto coilovers (brand new, just mounted) drift valving with 9k/7k rates PENDING
-Megan rear lower traction rods SOLD
-Megan RUCA's SOLD
-Megan rear toe arms SOLD
-Megan front tension rodss SOLD
-Tein inner and outer tie rods(one boot ripped) w/ PBM spacers SOLD
-Solid steering shaft bushing(new) SOLD
-Energy prothane(red/new) steering rack bushings $15
-Ebay 5 lug with 60mm extended studs $220
-NRG steering wheel hub.....SOLD
-HKS Intake filter kit (no foam included) $30
-Progress rear sway/anti roll bar (3 ajustments) $120
-Custom stainless 3 inch cat back exhaust with dual blast pipes (one hanger needs welded) $250
-Autometer Pro-comp Ultra-lite(silver) 2 5/8" 0-100 Fuel psi gauge w/ SS line $60
-Autometer Autogage Tachometer 8k rpm(black) $30
-Autometer Pro-comp Ultra-lite(silver) 0-100 Oil psi gauge $30
-Koyo S13 SR20DET aluminum radiator (dented bottom/still flows) SOLD
I think that is everything minus all of the small block Ford V8 swap parts that I have. I also have pics of pretty much everything and might post them up later or you can pm me. I just figured the thread was already long enough. All prices are negotiable and I am ready to sell it all!
Thank you,
Sean
First off is the chassis. Which is a 91' hatchback with a clean title and ZERO rust!!! I can include or remove any of the parts in this ad for an adjusted price. Or else it will be coming with mostly stock parts and what I have listed.
Things it has:
6 point cage w/ door bars (not the best welds)
Walbro 255lph fuel pump
Crack free dash and console
working e-brake with drift button
Forced fab modded knuckles (55* or so of angle)
AIT M4 Aggressive Aero (full kit) cracks here and there, but mostly partially repaired
1 spare AIT M4 rear bumper (only mounted and moved around the garage)
Engine bay and inteior have been recently sprayed black with floor truck bed lined
front fender wells, frame rails and trans tunnel undercoated
Things it needs:
Drivetrain
Body harness (I cut the old one out, but still have it)
Tie rods
Fenders
Wheels
Seat
Steering wheel
Windshield
whatever else you want to put on it
$1200 OBO
http://i9.photobucket.com/albums/a88/seandb20/2012-02-03_15-11-06_707.jpg
http://i9.photobucket.com/albums/a88/seandb20/269064_695786711197_50612135_34947182_380728_n.jpg
http://i9.photobucket.com/albums/a88/seandb20/281531_695800852857_50612135_34947340_5259106_n.jp g
And off the the parts!
-Kaaz 2 way differential $700
-Fortune Auto coilovers (brand new, just mounted) drift valving with 9k/7k rates PENDING
-Megan rear lower traction rods SOLD
-Megan RUCA's SOLD
-Megan rear toe arms SOLD
-Megan front tension rodss SOLD
-Tein inner and outer tie rods(one boot ripped) w/ PBM spacers SOLD
-Solid steering shaft bushing(new) SOLD
-Energy prothane(red/new) steering rack bushings $15
-Ebay 5 lug with 60mm extended studs $220
-NRG steering wheel hub.....SOLD
-HKS Intake filter kit (no foam included) $30
-Progress rear sway/anti roll bar (3 ajustments) $120
-Custom stainless 3 inch cat back exhaust with dual blast pipes (one hanger needs welded) $250
-Autometer Pro-comp Ultra-lite(silver) 2 5/8" 0-100 Fuel psi gauge w/ SS line $60
-Autometer Autogage Tachometer 8k rpm(black) $30
-Autometer Pro-comp Ultra-lite(silver) 0-100 Oil psi gauge $30
-Koyo S13 SR20DET aluminum radiator (dented bottom/still flows) SOLD
I think that is everything minus all of the small block Ford V8 swap parts that I have. I also have pics of pretty much everything and might post them up later or you can pm me. I just figured the thread was already long enough. All prices are negotiable and I am ready to sell it all!
Thank you,
Sean