What is this please....

[Hotcakes0007]

ok 95 s14 with s13 ka build

je pistons
eagle rods
z32 maf
fmic
650 injctors
2871 garret turbo
enthapy rom tune
cometic hg
blah blah here is a vid of what it is doing at idle, when i give it gas it tried to die. I hope its not the timing but idk maybe the cam angle sensor? feed back please.

Fully built ka-t back yard productions - YouTube (http://www.youtube.com/watch?v=j9ngrv0n2eA)

[Tantwoforty]

ok 95 s14 with s13 ka build

je pistons
eagle rods
z32 maf
fmic
650 injctors
2871 garret turbo
enthapy rom tune
cometic hg
blah blah here is a vid of what it is doing at idle, when i give it gas it tried to die. I hope its not the timing but idk maybe the cam angle sensor? feed back please.

Fully built ka-t back yard productions - YouTube (http://www.youtube.com/watch?v=j9ngrv0n2eA)

KA's dont really have cam angle sensors, its built into the dizzy.
You need to check the timing with a timing light.
Then pull the codes
Then id check for vaccume leaks/ boost leaks (do you have a shitty bov?)
Make sure it has gas..
need more info, your video sucks

[Nikeboy355]

Sounds like you have basic setup problems... I would look into the sensors and calibration...
Getting the motor together is the easy part...
Getting it to work properly is another...

Check your harness pin to pin for any breaks...
Read the FSM and make sure everything is adjusted properly...

[Hotcakes0007]

figured it out the distrib was off by a tooth its idleing pretty good now just need to fix some vac leaks thanks for the quick response guys <3