ka24de-t

[90240sx]

so im doing a bit of work with my car http://i286.photobucket.com/albums/ll109/red240sx/240sx%20how%20to/IMG_0237.jpgthat kind of stuff and im just curious about how to properly remove the egr emission and the black box because im going turbo i have already remove the 4 to 1 hose that connects from the intake mani to the pcv valve and bought my oil catch can but i need assistance with the egr removal i have the block off plate but extra vacuum lines that i am not sure where to redirect so if you know of a link for egr removal step by step it would be appreciated THANKS!

[Frank_Jaeger]

I know a diagram exists for s14. Might be the same for S13. Dunno what you have.

[justinbyrant]

remove all the vacuum lines and delete your charcoal canister, you can litterally delete all of the stuff on the intake manifold and make plates to block it all off, thats what i did, you can adjust your idle with the screw enough to make it idle right plus you will eliminate all your boost leak factors and clean it all up, but to answer your question, all of the little vacuum lines are only there for the egr and emissions stuff, remove all the little ones, remove the charcoal canister and all of the lines running to it and plug the vacuum port behind the throttle body on top of the bottom section of the intake manifold and plug the vacuum port on the bottom of the throttle body, you can use the one on the bottom section of the manifold for your bov and stuff if you want

[90240sx]

can you show a pic im a retard and need pics of what exactly to block off