View Full Version : Redtop Sr20DET Turbo & waste Gate
240sx_LokiS14
05-06-2012, 05:22 AM
So i was told today that my waste gate should be connected to my turbo. but i don't have a nipple to connect a hose from the turbo to the waste gate. I was told there is a spot on the turbo where i can drill/tap a nipple on it.
:mepoke:
Is this recommended?
:s101:
SofaKingFast
05-08-2012, 01:17 PM
If you don't want to have to weld:
Turbo Quick Tap Fitting for Boost Source (http://www.frsport.com/Turbo-Quick-Tap-Fitting-for-Boost-Source_p_7854.html)
You can drill into your silicon coupler for your hot pipe assuming you have an FMIC, and install this bad boy. Good luck.
UNITEDMASTER
05-08-2012, 05:38 PM
Yes , that is standard procedure. Just drill & tap compresor housing. Some turbos have a spot in the casting for you.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.