will i be able to fit 18x10+15(f) s14

[zbarsuglia]

So I have posted on the wheel fitment question thread yet no one answed my question. I am thinking of buying wheels for my s14
Ame tm02 18x10+15 all around. Will I be able to fit them under the front with just a roll and camber? I have Cusco coils and was also wondering if I needed to run a spacer? Any help would be appreciated. Thanks!!

[Perfect Balance]

http://zilvia.net/f/chat/392494-wheel-fitment-question-thread-34.html

edit: My bad, didnt even read the thread. I say try again, but in short, no, not without a pull. You can do a crap load of camber, but then you're probably going to hit the coilovers, so you will probably need to pull.

[godrifttoday]

Hell yeah!!!!

[Phlip]

18x10.5 all around:
http://zilvia.net/f/chat/384428-whos-put-18x10-5-front-their-s-chassis.html#post4042845

Also 18x10.5, with a spacer even:
http://zilvia.net/f/chat/384428-whos-put-18x10-5-front-their-s-chassis.html#post4043600

more
http://zilvia.net/f/chat/384428-whos-put-18x10-5-front-their-s-chassis.html#post4103719

just a start, good luck

[zbarsuglia]

18x10.5 all around:
http://zilvia.net/f/chat/384428-whos-put-18x10-5-front-their-s-chassis.html#post4042845

Also 18x10.5, with a spacer even:
http://zilvia.net/f/chat/384428-whos-put-18x10-5-front-their-s-chassis.html#post4043600

more
http://zilvia.net/f/chat/384428-whos-put-18x10-5-front-their-s-chassis.html#post4103719

just a start, good luck

ya i searched that thread and didnt get ea definite answer. i see some of the people are pulling it off but with a pull. i dont mind maxing out my camber plates. i just need a definite answer. Im also looking to go pretty low.

[JasianBlazin]

probably need a 5 mm spacer to clear coil.

[fliprayzin240sx]

Enough of us runs 10j up front under stock fenders, might need spacers if it doesnt clear the coilovers. Cuscos aren't fat like MR. I'm running 20mm spacers on my Equips to clear r33 brakes.

[zbarsuglia]

Enough of us runs 10j up front under stock fenders, might need spacers if it doesnt clear the coilovers. Cuscos aren't fat like MR. I'm running 20mm spacers on my Equips to clear r33 brakes.

By stock fender you mean no pull*

[Enna]

Yes no pull. S14's are wide bitches, rolling the fenders alone covers a lot.

[russian]

you will need a spacer 5mm should suffice for coilover just to be safe with no rub

[solidsnake180sx]

With camber, yes it will fit. I used to run 18x9.5 +15 with no pull. Just camber and stretch

[zbarsuglia]

Thanks all for your input. It has helped a lot. I am looking for a pair of ame tm02 18x10+15 all around. If any of you know of someone selling them let me know!

[fliprayzin240sx]

By stock fender you mean no pull*

If you want to run stupid amount of camber while stretching some 205s, yah its possible. But honestly, its not that hard to pull the front fenders. If you use a roller, and you rolled the front fenders...more than likely, you already pulled it some already.

[matts13vert]

Auto RnD is selling them now.

[el_tapatio]

How about just to install on a stock body s14? Will they still fit without any modifications?

Sent from my 0PM92 using Tapatalk

[OBEEWON]

Yes.
In the trunk.
Only one though.
And it might not close.

[el_tapatio]

Damb boi

Sent from my 0PM92 using Tapatalk

[Mofuhcka]

You can do anything if you put your mind to it

[brndck]

How about just to install on a stock body s14? Will they still fit without any modifications?

Sent from my 0PM92 using Tapatalk

Damb boi

Sent from my 0PM92 using Tapatalk

please refrain from posting USELESS shit in threads that are years and years and years and years old. :picardfp::picardfp::picardfp::picardfp::picardfp: :picardfp:

[KAT-PWR]

Does anyone know if I can fit real Rotas on my s13? I've searched and I don't think anyone has run them!

[Hoffman5982]

18x10 +15 all around on my s14, had to have 3mm spacers up front to clear the coilover. I ran 225/40's all around and -4.5* camber in the front, -4* in the rear. Fenders were rolled and slightly pulled. It rubbed really bad. I will never go back to that stance bull shit.


http://i68.photobucket.com/albums/i40/hoffman91/ZpDFcAH_zpsy2brtxr0.jpg
http://i68.photobucket.com/albums/i40/hoffman91/Yzi41I2_zpsmvoshajo.jpg

[OBEEWON]

I don't believe those alignment numbers for some reason.

[FaLKoN240]

Why would you put 10" wheels on the front of a stock car? For what?

Locking this.