Enjuku Racing - New Proto-type ISIS Exhaust

[Enjuku Racing]

We just finished test fitting the newest proto-type exhaust got from ISIS. This thing sounds amazing!!! Nice deep tone, not to loud, looks a lot like stock. But is 3"

This is going to be an awesome quite turbo exhaust.

http://external.enjukuracing.com/mbse2.jpg

http://external.enjukuracing.com/mbse2tips.jpg

Will most likely be about 8-10 weeks before the first production shipment arrives.

Let us know if you have any thoughts.

thanks
Ken

[motorsporttc]

NIce!!! I likey

[Vadim's13]

Looks clean!!!

[all show no go]

Sweet looking exhaust. Where can I get that license plate frame?

[tuquik]

Sound clip?

[h2v7]

yup get pricing together my isis blast pipes may need to go and try these out!!

10 weeks tho daayyyyyum

[TrustS13]

Looks good, maybe tips angle up a little like the Circuit Sports did? Hows clearance with that big resonator?

[azndan2]

It would be nice if it was matte black

[Enjuku Racing]

It does have a slight angle up. The look flows real nice.

No sound clips just yet. Sorry....

It tucks up under the car really nice. The front section is the same as their MBSE Exhaust.

[prowess]

looks good, but i wish you offered the straight pipe dual 3in axel back combined with the mbse mid pipe.

basically what im saying is straightpipes with a resonator.

[Om1kron]

I think if it doesn't drag ass all over the place and break the hangars (which could probably use some reinforcement) And sounds decent under load I would actually consider picking one up. I'm really over the single bullet style n1 exhausts on our cars, this is the first thing a cop uses as an excuse to segway into a ref ticket on our cars.

Also options for a blacked out rear muffler can with polished tips would probably be good, RSR style for people who like their parts low kei.

[Okinawandrifter87]

^^ kinda like the Apexi Noir exhaust

[Pinggg]

Nice for a low key type exhaust.

[Project S13]

What's the price tag on it.

[redline racer510]

S14?????????????????????????????????????????

[locoluna825]

I LOVE IT! but like project s13 said... whats the price tag???

[nismoracingsx]

i'll pick one up when they come out ^_^

[Edwin562]

i like it. I will get 1 too. what hangers are those (yellow)??

[s13coupe92]

nice!! i like it alot

[DanielS14]

i hope this come in a s14 version and what do you guys think the price tag will be

[Knuckles]

Also options for a blacked out rear muffler can with polished tips would probably be good, RSR style for people who like their parts low kei.

I agree with this^ stealth is the key! ......also any way we can get some side shots of the exhaust mounted on the car. I wanna see what the clearance is and how high it sits or hangs.....kinda worried about the clearance with that big resonator.:-/

[Biggamehit]

Damn awesome I might be ordering this!!

I need this also as D1 is cracking down on semi loud cars....

[[email protected]]

Shouldn't be any clearance issues unless you're running your car at an unreasaonably low height. All the older HKS, Greddy, Apexi, Kakimoto, Silent, and Fujitsubo exhausts we have in the shop pulled off cars in Japan have that mid-pipe muffler, which makes a REALLY nice sound (even makes KAs not sound like dogshit). Looks great Ken!

[ZenkiKid]

Do these tuck into the undercarriage well? I mean they dont hang low do they?

[Mitsubayati]

I am waiting on the sound clip. I just want something very quiet that won't get me hassled by cops. How much!?

[Fredward]

How wide is it from the outside of one tip to the outside of the other?

[DA KAOS]

I can't wait for this to come out.

[Perfect Balance]

Need pictures of how it actually looks when the car is sitting on the ground. I've got an ISIS, but it's not exactly discreet.

[jerry_beans]

Veryyyy nice dooo want!

[da_crew10]

Looks awesome , id get one but i love my isis blast pipes!

[moco]

I want to know price also

[WERDdabuilder]

finally, something OEMish.
http://crispy.mobi/itunes/monta-ellis-handshake-gif-i1.gif
paint the canister black and youre set to pop. sound clip on SR asap.

[racecar11]

This is exactly what Ive been waiting for!
I know these questions have already been asked but oh well....
S14?
Matte black finish?
Price?
Pre-order options?
Pretty sure I want one if so...

[Enjuku Racing]

We are guessing the pricing will be similar to the MBSE Exhaust which is right about $300. That is just a guess right now.

The exhaust tucks up really nice. Their MBSE was one of the best fitting exhausts we have seen in years, in terms of clearance of the piping. This muffler is not at round as the MBSE and has even better clearance.

The yellow hangers on the exhaust are ISIS - *ISIS Exhaust Hanger Bushings - Enjuku Racing Parts, LLC (http://www.enjukuracing.com/products/%2AISIS-Exhaust-Hanger-Bushings.html)

As for a sound clip, i most likely will not have one for a few weeks. We had to make a few small corrections to the proto-type to make it tuck up and be spot on, so its already on the way back to ISIS for production. Sorry.

Thanks for the comments and suggestions.

Ken

[TrustS13]

You know what would be awesome? If you guys offered a mix and match service. That way we could get this mid pipe, with the 4" blast pipes as the rear section. If this is at all possible, please let me know. I know I am one of many who want to do something like this. Also do you guys sell the 4" blast pipes separately? Thanks

[Enjuku Racing]

You know what would be awesome? If you guys offered a mix and match service. That way we could get this mid pipe, with the 4" blast pipes as the rear section. If this is at all possible, please let me know. I know I am one of many who want to do something like this. Also do you guys sell the 4" blast pipes separately? Thanks

We have tossed that idea back and forth numerous time with them. The stocking / inventory logistic would be a pain, i think. But it is something that we need to see if we can get pushed through in some way.

[redline racer510]

Any s14 love???

[Royal13]

Please black for low key!

[Chaluska]

No black, i want that exact exhaust.. i had been debating on the MBSE, because of the large tip but this is EXACTLy what ive been wanting... keep us up to date on when this is in production.. if you have any sort of sale, put me down for one..

[Knuckles]

We are guessing the pricing will be similar to the MBSE Exhaust which is right about $300. That is just a guess right now.

The exhaust tucks up really nice. Their MBSE was one of the best fitting exhausts we have seen in years, in terms of clearance of the piping. This muffler is not at round as the MBSE and has even better clearance.

now thats what i like to hear! can't wait to hear more about this!

[Biggamehit]

You guys and your black.. I want mine Matte Hot Pink for my ladies.


These are going to sell out faster than a new Ipod.

[Broker Face]

hello my future exhaust......so can i get a reserve or something for this first production shipment, in order to conduct my exhaust review for fellow zilvians? :)


better be s14 or scrap production

[Chaluska]

hello my future exhaust......so can i get a reserve or something for this first production shipment, in order to conduct my exhaust review for fellow zilvians? :)


better be s14 or scrap production

Lol, Yea, im sure they will scrap production because the s14 sucks.

ken, you should get a pre-sale group buy going on... i will definitely be down

[usdm180sx]

Can you post a level pic? I wanna see how the exhaust tucks up against the car clearance wise. Thanks!

[mitcheyismyname]

im down for this one. I'm probably spray something to prevent corrosion on the piping. Looks good.

[Andres_G]

It looks like they copied this design (http://forums.nicoclub.com/new-exhaust-for-the-s13-s14-240sx-t48608.html)

[Chaluska]

It looks like they copied this design (http://forums.nicoclub.com/new-exhaust-for-the-s13-s14-240sx-t48608.html)

why because they used a dual tip muffler?

doesnt look like BRM at all to me..

http://i705.photobucket.com/albums/ww57/AZhitman/BRM/S13CatbackBRM5.jpg

http://external.enjukuracing.com/mbse2.jpg

ISIS dual tips are closer together, rendering a better look.. BRM uses a generic single in dual out magnablow muffler, intended for a single pipe to dual pipe exhaust applications.. notice how far apart the muffler tips are. GROSS..

BRM uses a small straight through resonator, which does nothing for resonation... ISIS uses basically a straight through 3" resonator, with much more interior resonance absorbtion...

also isis will be half the price of BRM, and if its anywhere near as quiet as the MBSE, it will be a HUGE seller..

[snafupossum]

We have tossed that idea back and forth numerous time with them. The stocking / inventory logistic would be a pain, i think. But it is something that we need to see if we can get pushed through in some way.

You should still make them compatible. I would personally buy the whole exhaust just for the front section and connect it to my rear blast pipes. Then I could pawn off my front section and this rear in the marketplace. :s101:

[khmer1]

even though i have still have my stock exhaust and an aftermarket one i will differently get this just because i love how it looks and quality of them as borat would say "Veryy NiccEE"

[Banana_Cute]

Do you guys just sell it as a muffler? Or the $300 a catback/axle back?

This is the type of exhaust im looking for to put in my other car.

[datpurpledrank]

in for price, and pics with the car on the ground!

[Wookie384]

I know I'm gonna get flamed, but what about 2 1/2 inch for the KA/NA guys?

[WISH ONE]

PRice shipped to 92618?

[Chaluska]

I know I'm gonna get flamed, but what about 2 1/2 inch for the KA/NA guys?

why go 2.5" over 3"?

There is absolutly NO gain in using a 2.5 over a 3"... 3" will always make more power

[DJ-of-E]

Sound clip please and you will have my money if I like it. =P

[Wookie384]

why go 2.5" over 3"?

There is absolutly NO gain in using a 2.5 over a 3"... 3" will always make more power

Did you catch the part where I mentioned N/A as in naturally aspirated? I have an N/A SR20DE, I highly doubt it will make more power with turbo sized piping.

[Banana_Cute]

2.5 will do. also with a reso. test pipe, sure. you want some kind of back pressure on N/A's

[Chaluska]

2.5 will do. also with a reso. test pipe, sure. you want some kind of back pressure on N/A's

keeping this thread back on topic.....
enjuku, whats up with this exhaust.. any updates :naughty:

[Enjuku Racing]

Yes, this 3" dual tip is in production from what i understand. We just had to verify fitment and what not.

We are hoping to have our first shipment in about 8 weeks.

thanks
Ken

[Chaluska]

Ken, did you manage to take any pics of it on the ground? I wanted to see what type of angle the tips have .. Like if it's similar to circuit sports' old exhaust.. I'm definitely looking forward to this

[Enjuku Racing]

Ken, did you manage to take any pics of it on the ground? I wanted to see what type of angle the tips have .. Like if it's similar to circuit sports' old exhaust.. I'm definitely looking forward to this

No, I am sorry i didn't. We should have them in about 6-8 weeks and will take more pics and sound clips.

thanks
Ken

[DJ-of-E]

keeping this thread back on topic.....
enjuku, whats up with this exhaust.. any updates :naughty:

I'd buy it if it has 2.5" piping as well. I track my n/a ka :doh:

[s13asher]

I will be buying this exhaust for my s13 without a doubt.

It'd be nice to change out with the blast pipes every now and then - especially if i were to take the car on a road trip.

-asher

[Chaluska]

I'd buy it if it has 2.5" piping as well. I track my n/a ka :doh:

yea, except the 2.5" has absoutly NO gain anywhere over a 3"

just saying

[shinhed]

Where's the S14 love? For the folks craving a black/stealth version, just rattle can the mofo. There are enough stealth/black/noir mufflers like these already and especially considering you can rattle can every one that's not.

Maybe we'll see single and dual tip versions for the S14 someday....

[Chaluska]

enjuku, any word? im very excited to see this exhaust

totally going to go on my VH Vert

[Enjuku Racing]

enjuku, any word? im very excited to see this exhaust

totally going to go on my VH Vert

From what i understand they are in production. My best guess is 6-8 weeks before we see them.

[khmer1]

soooo in like 2 months huh damn that a long wait :(

[DJ-of-E]

soooo in like 2 months huh damn that a long wait :(

No kidding. If the price is like the other, i'd hop all over this.

[93s13vert]

im excitied i think i'll be picking this up... in for more pics and vids...

[weirdchris555]

Lol this looks like the discontinued Circuit Sport exhaust I have from ages ago.

Sent from my SCH-I405 using Tapatalk 2

[MuteTurkey]

In for price and sound clip as well. Exactly what I'm looking for. Not a big deal but if a black one is produced, you'll have my money ASAP. Will buy regardless though. Any updates on release? Early May you said 6-8 weeks and you said 6-8 weeks recently. Just curious.

[Enjuku Racing]

In for price and sound clip as well. Exactly what I'm looking for. Not a big deal but if a black one is produced, you'll have my money ASAP. Will buy regardless though. Any updates on release? Early May you said 6-8 weeks and you said 6-8 weeks recently. Just curious.

Sorry, unfortunately we don't control their production schedules. Sorry guys.

Thanks
Ken

[h2v7]

I will be buying this exhaust for my s13 without a doubt.

It'd be nice to change out with the blast pipes every now and then - especially if i were to take the car on a road trip.

-asher

yes i will be doing the same



can i get on a pre order notify list?

[MuteTurkey]

Any updates on release time?

[Enjuku Racing]

Any updates on release time?

They are in production, now. We are just waiting on them to let us know how long that will be and shipping time.

sorry for the delays

ken

[MuteTurkey]

No problem. Thanks.

[ride 4 lame]

How does this compare to the megan type 2 you guys sell?
Fitment and sound?

[Zero-Offset]

dying for this. will purchase once available.
cmon enjuku, take my money!!
:)

[mrsuave]

update on shipments? i can't wait!

[e5s4y]

update on shipments? i can't wait!

^THIS

infortheupdate

[ksharp]

Bump and grind! Any news??

[Enjuku Racing]

We have 2 coming this week. We will be testing those 2 final production models. The rest are on the way, FINALLY! They will still be about 4 weeks until they get here.

We will post install pics and video as soon as we receive the first 2

thanks
Ken

[NISR20MO]

Looks like a straight copy of the megan type 2 dual....

[Enjuku Racing]

This exhaust is based off the ISIS MBSE. The piping is identical to the MBSE, just with a Dual tip muffler. It is not a copy of anything.

thanks
Ken

[Enjuku Racing]

We just got the first 2 production exhausts in stock. We will be posting videos shortly. The full stocking shipment is on the way ~4 weeks. finally !!!

http://www.enjukuracing.com/product_images/j/888/dualtipfullsmall__67329_zoom.jpg

http://www.enjukuracing.com/product_images/l/417/dualtipssmall__82212_zoom.jpg

http://www.enjukuracing.com/product_images/a/629/dualtipfulllongsmall__39270_zoom.jpg

http://www.enjukuracing.com/product_images/b/480/dualtipisislogo__57621_zoom.jpg

http://www.enjukuracing.com/products/%2AISIS-MBSE-Type%252dE-Exhaust-System-%252d-Nissan-240sx-89%252d94.html

[MuteTurkey]

Is there a limited number for pre orders?

[Enjuku Racing]

Is there a limited number for pre orders?

No real limit...... the only limit is the # that they are shipping us.

thanks
Ken

[galaxy convoy]

Will this fit on stock 89 s13 ka24e?
thanks

[Enjuku Racing]

Will this fit on stock 89 s13 ka24e?
thanks

Yes, it will bolt right up.

thanks
Ken

[Wanabe]

Buying this for sure.

[ksharp]

nice, cant wait!

[Hawk69]

SOUND CLIP NOW!!!!!!! VROOM VROOM!!

Will the sound clip be with a car that has a sr20det or a ka24?

Thanks!

[Enjuku Racing]

SOUND CLIP NOW!!!!!!! VROOM VROOM!!

Will the sound clip be with a car that has a sr20det or a ka24?

Thanks!

We have a video of it on a stock KA with test pipe. It is from a crappy old camera. We trying to get a better camera.

it sounds great!

Ken

[h2v7]

will my dual 3 inch isis blast pipes mid pipe work as this midpipe so i can get rid of that middle resonator/muffler?

[fliprayzin240sx]

will my dual 3 inch isis blast pipes mid pipe work as this midpipe so i can get rid of that middle resonator/muffler?

Better question would be, ISIS thinking about adding a mid-pipe resonator on the blast pipes, ala buddy club exhaust?

[RandomVelox]

Can't wait to get this! :hsdance:

[90pearlz]

I'll be preordering. I'm wondering what shipping will cost or if they're might be a group buy special or something. Can't wait to hear a sound clip, not that it really matters.

[Enjuku Racing]

Here is a quick Video of the exhaust.

Enjuku Racing | ISIS Performance MBSE Type E Sound Clip - YouTube (http://www.youtube.com/watch?v=ofrd7q0x6os&feature=youtu.be)

It is on a Stock KA24DE with test pipe. Sr will sound deeper and quieter.

What do you guys think?

Shipment is on the way ~3-4 weeks out.

[e5s4y]

That sounds awesome. So stoked to be able to pick one of these up in a month or so. Need a sound clip of it on an sr? Lol

[RandomVelox]

Sounds great! Can't wait to get it for my Sr. :bigok:

[MuteTurkey]

Sounds kind of farty at higher rpms or is that just what the camera picks up

[Enjuku Racing]

Sounds kind of farty at higher rpms or is that just what the camera picks up

We have a really old camera :o( we are trying to get a better video setup so we can get more accurate sound.

It is a really good sounding exhaust. For being a 3" setup on a KA, it sounds pretty good.

[h2v7]

Better question would be, ISIS thinking about adding a mid-pipe resonator on the blast pipes, ala buddy club exhaust?

what can i do i love my blasters but anyway i can slap a resinator in my mid pipe?


other than a exhaust shop weld some junky thing in there

[fliprayzin240sx]

what can i do i love my blasters but anyway i can slap a resinator in my mid pipe?


other than a exhaust shop weld some junky thing in there

If ISIS can make their exhausts interchangeable, where you can use different pipings off the the different style exhaust and mix them, that would be awesome. Get the full size pre-muffler off this exhaust, then have the blast pipes for the axle back piece. I imagine that wouldnt be too hard to do as long as the mid exhaust flange is placed at the same spot between chassis.

[90pearlz]

Actually sounds pretty dang good on that ka. 4 cylinder NA's usually sound pretty crappy no matter what. Definitely a little farty but I bet it sounds sick on a FI car. Can't wait

[MuteTurkey]

Can we get a shot of it from the side? I'm curious as to how far it sticks out.

[h2v7]

If ISIS can make their exhausts interchangeable, where you can use different pipings off the the different style exhaust and mix them, that would be awesome. Get the full size pre-muffler off this exhaust, then have the blast pipes for the axle back piece. I imagine that wouldnt be too hard to do as long as the mid exhaust flange is placed at the same spot between chassis.

yes this is what isis has been doing so far (i think) so ima buy this one and cross my fingers

[h2v7]

may have to remove left towhook for this to fit?

[Enjuku Racing]

The MBSE and the MBSE Type-E use the same mid pipes. The GT Singles and the EP Duals (blast pipes) use the same mid pipes. However, They arent selling us just the tip sections seperately. We are trying to get them to, but no luck as of yet.

Yes, because the muffler angles up to follow the body line of the rear bumper it gets really close to the tow hook. If you have factory hangers it may move enough to hit it.

[93s13vert]

do we know the pricing for these?

[Enjuku Racing]

They have now been listed on our site for sale

*ISIS MBSE Type-E Exhaust System - Nissan 240sx 89-94 - Enjuku Racing Parts, LLC (http://www.enjukuracing.com/products/%2AISIS-MBSE-Type%252dE-Exhaust-System-%252d-Nissan-240sx-89%252d94.html)

thanks
Ken

[90pearlz]

^^ 300. With shipping looks like $388 give or take.
How about a first so many orders receive free shipping promotion??? Haha, i know i know but it is worth a shot.

[Chaluska]

this is my review of the ISIS MBSE Type E exhaust.

Over-all this exhaust is GREAT. My friend has the MBSE, so i kind of had an idea of what to expect, but i had no clue how badass this exhaust was going to be.


http://chaluska.files.wordpress.com/2012/08/20120807-222436.jpg?w=510

the exhaust arrives at work, and the box was damaged by UPS, one of the muffler tips was a little bit dented on the side. i was able to hammer it out and smooth it, so its not a issue, clearly a shipping error, Not enjuku/isis.

http://chaluska.files.wordpress.com/2012/08/20120807-234751.jpg?w=510

i opened the box to inspect what all is included, all nuts bolts and washers were included, as well as all gaskets needed. ready to bolt together and go straight on the car.

http://chaluska.files.wordpress.com/2012/08/20120807-234817.jpg?w=510

i couldnt help but to put it all together, to see what im working with.

http://chaluska.files.wordpress.com/2012/08/20120808-214430.jpg?w=510

First things first, i bolted it on the vert, to see how the exhaust looks on a coupe/vert...

heres the outcome.

http://chaluska.files.wordpress.com/2012/08/20120809-184848.jpg?w=510

http://chaluska.files.wordpress.com/2012/08/20120808-223737.jpg?w=510

and then for giggles i tossed it on my DD, just to see how it sounds with a stock KA w/high flow cat

http://chaluska.files.wordpress.com/2012/08/20120809-202228.jpg?w=510

http://chaluska.files.wordpress.com/2012/08/20120809-202221.jpg?w=510

I have to say it fits out further on the hatch, i think this is due to the coupe being slighty longer.

you MAY have to mod your tow hook, i didnt, but i noticed that if you moved the exhaust around enough, it coud hit back at the tow hook.. some ISIS stiff poly exhaust mounts could prove helpfull here.

on crank up, the exhaust is barely noticible (SLIGHTLY louder than stock) under light accelleration, idle, partial throttle, its barely loud enough to be uncomfortable.. under wot/accelleration it definitely wakes up, and is pretty loud. i didnt experience any drone (in comparison to a N1 style), even cruising at 3000 rpms, it was really mellow. Im extremely pleased with the exhaust, and enjuku has been MORE than helpful and accomidating with me.
for more install pictures, check out my blog.



for more install pictures, check out my blog.

Chaluska's Blog (http://chaluska.wordpress.com/)

[fliprayzin240sx]

The MBSE and the MBSE Type-E use the same mid pipes. The GT Singles and the EP Duals (blast pipes) use the same mid pipes. However, They arent selling us just the tip sections seperately. We are trying to get them to, but no luck as of yet.

Yes, because the muffler angles up to follow the body line of the rear bumper it gets really close to the tow hook. If you have factory hangers it may move enough to hit it.

If that happens, I'd be willing to give it a shot. I just cant do staight pipes anymore, I'm too old for that shit. If it can be slightly quieter than my old Buddy Club II exhaust with the GT Single premuffler, I'll be all up on it.

[MuteTurkey]

Chaluska, could you post a video of the sound and maybe a drive by or 2?

[h2v7]

The MBSE and the MBSE Type-E use the same mid pipes. The GT Singles and the EP Duals (blast pipes) use the same mid pipes. However, They arent selling us just the tip sections seperately. We are trying to get them to, but no luck as of yet.

Yes, because the muffler angles up to follow the body line of the rear bumper it gets really close to the tow hook. If you have factory hangers it may move enough to hit it.

can i please just buy a gt single midpipe? or at least let me know if this is ever possible

[Knuckles]

Anyone with a SR get this yet? Anyone riding slammed get this yet? I wanna see some review on how it sounds with an SR and see the clearance on a slammed car s13 preferably.

[Knuckles]

If that happens, I'd be willing to give it a shot. I just cant do staight pipes anymore, I'm too old for that shit. If it can be slightly quieter than my old Buddy Club II exhaust with the GT Single premuffler, I'll be all up on it.

Ray ig you get it I need feedback! I have the Buddy Club spec II on my coupe "sr" and love the sound I just need that low key look now, maybe paint the canister black for that stealth look.

[jamg]

someone needs to put this on an SR make a video asap!

[Nizzan4u2nv]

Any S14 updates? Need an exhaust with good ground clearance and quiet for my daily. Stock exhaust is too damn ugly.

[90pearlz]

Any new sound clips? Someone has to have this on a sr or RB

[Koukicrazy]

I would also like a sound clip on an SR20DET. I have the ISIS N1 Dual exhaust I bought from Enjuku and love it. However the N1 exhaust does not fit with my 180sx Type X rear valance. This one looks like it will fit just fine.

[Enjuku Racing]

I would also like a sound clip on an SR20DET. I have the ISIS N1 Dual exhaust I bought from Enjuku and love it. However the N1 exhaust does not fit with my 180sx Type X rear valance. This one looks like it will fit just fine.

We have sold a TON of these, so I would assume someone put it on an SR. I think it will sound amazing.. for it to sound as good as it does on the KA.

Ken

[taseanaendy]

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - Reply to Topic
<a href=http://saclongchampsmagsinns.webnode.fr/>sac longchamp</a>

[DJ-of-E]

I know this is like thread revival, but I would like to know what is the weight of this exhaust. I know stock is around 25lbs.