GT3076 JDM sports

[silviaNC]

how this turbo performs? Im not sure if is an R or not. on the stamp only says gt3076.
a/r .70
.64 out
will put more info when I get home.
is also a top mount

Im looking to get 450+ HP with my setup
crower rods
BC 264's
BC srping/retainer
Greddy valves
greddy Intake
CP pistons
660cc Injectors

[Om1kron]

Google, this is the worst place to ask this question. By 34 posts in I figure you don't understand how this website works. your rods and shit mean nothing. you'll need an .84 housing to get in the 450+ game with that turbo as it's possible but it will be lag city, you'll still be in lag city but not as bad with the .64 exhaust housing.

That said, build your car first and then dyno it, don't go building an engine off of a google shopping cart then come here and tell us if your money is being spent right or give you ideas of what you want to buy with your money.

What the fuck are you going to do with 450hp? drift? LOLOLOLOL!!! Definitely not with that turbo unless you're doing 100mph entries.

[silviaNC]

Google, this is the worst place to ask this question. By 34 posts in I figure you don't understand how this website works. your rods and shit mean nothing. you'll need an .84 housing to get in the 450+ game with that turbo as it's possible but it will be lag city, you'll still be in lag city but not as bad with the .64 exhaust housing.

That said, build your car first and then dyno it, don't go building an engine off of a google shopping cart then come here and tell us if your money is being spent right or give you ideas of what you want to buy with your money.

What the fuck are you going to do with 450hp? drift? LOLOLOLOL!!! Definitely not with that turbo unless you're doing 100mph entries.

I ENJOY just reading the answers lol.
First. All this was a setup from a friend that quit. I dont care reasons why he did nor wanna hear why u think he quited. You. Are free to put down your opinions and make rhis a piece of shit thread or make a usefull one. No im not drifting by the way

[Mr.GT30]

you know what ,, i actually have that set up GT3076 and fully built SR, I made 450 HP on 91 pump gas. and it on youtube 240sx SR20DET dyno pull 450HP on 91 pump gas - YouTube (http://www.youtube.com/watch?v=AZD41ZCCRJA)

[Walperstyle]

Yeah you don't need a .84 exhaust side to get upwards of 500hp. Tune is everything.

if you are interested in what turbo's do, go here
Turbochargers | Turbobygarrett (http://www.turbobygarrett.com/turbobygarrett/)

also buy a book by 'motorbooks workshop' called 'how to turbocharge your car' or something like that.

I purchased a GT3582R before I did any reading. I wish I had a GTX3076. You will start to understand why when you look at compressor maps between turbo chargers and do some of the math behind it.

[silviaNC]

you know what ,, i actually have that set up GT3076 and fully built SR, I made 450 HP on 91 pump gas. and it on youtube 240sx SR20DET dyno pull 450HP on 91 pump gas - YouTube (http://www.youtube.com/watch?v=AZD41ZCCRJA)

Nice Video, can you telll us when do you reach full boost? I've been reading around and seems around 3800 rpm. thanks for the info. seems not everybody is and ass on this forum.

Yeah you don't need a .84 exhaust side to get upwards of 500hp. Tune is everything.

if you are interested in what turbo's do, go here
Turbochargers | Turbobygarrett (http://www.turbobygarrett.com/turbobygarrett/)

also buy a book by 'motorbooks workshop' called 'how to turbocharge your car' or something like that.

I purchased a GT3582R before I did any reading. I wish I had a GTX3076. You will start to understand why when you look at compressor maps between turbo chargers and do some of the math behind it.

Really good info on that site, I'm more likely to try this turbo set-up for now but I'm sure I'll be reading about turbochargers. You're right I've seens people doing 410hp with gt2871r( maxed out tho) but I rather have some lag and reach those 450hp. I will no be drifting so Im not too worried about reaching full boost at 3k rpm

[Def]

You don't have enough injector for a safe 450+ rhwp.

[silviaNC]

You don't have enough injector for a safe 450+ rhwp.

Looks like you are right. 740 cc minimun for what i've been researching. Cant find about the 660. Any idea how much hp this will hold?

[koukimonster139]

372.5hp

to be exact

[HIGHFIVEBETA]

Toss the BC bumpsticks.. Acquire Tomei or JWT

[silviaNC]

372.5hp

to be exact
thanks for the info. I'll consider the option of going to a gt2871r or get bigger injectors. I know its been discussed a lot of times but what is the lag difference between gt3076 and a gt2871. Ill be using the car more likely for street racing maybe drags, drift dont think so.

[silviaNC]

Toss the BC bumpsticks.. Acquire Tomei or JWT
actually the cams I have are a little worn and I've been looking into hks or tomei
. for what I've read 264 are the most common, best cams for turbo applications

[zurud]

Isn't jdm sport ebay turbo. You have decent internal but want to cheapout on the turbo.

[silviaNC]

Isn't jdm sport ebay turbo. You have decent internal but want to cheapout on the turbo.

not sure if it is or not, I do know they use garret Housing so you might be right. this came with the set-up nothing to do with cheaping out but I will use it till I get the 1,300 $ one.

I heard good thing about JDM and also some bad things. everybody have their own opinion