91 Octane + Stock S14 SR20DET?

[KoukiMnster]

hi guys about to get my S14 SR up and running and have a few questions...

So i understand 7psi is stock w/o the solenoid-and 11psi is stock w/ the solenoid...

but in japan they use a higher octane than california...

I was wondering what a safe boost level will be on 91. I am on the stock ecu w/o any sort of piggyback or tune. Current mods are:
Exhaust, dp, walboro 255, intake, fmic. No headwork, etc. I'm reading that the injectors/head tend to go around 12psi?

With my current mods, would I even need a boost controller or will the fmic raise my psi a bit.

Please help me out, thx!

[zurud]

To increase pressure above wastegate you need the boost controller. Fmic will not increase your pressure. The wastegate dictate your pressure. sr has knock sensor to reduce power when encountering detonation.

[!Zar!]

12psi is fine.