Lots of KA24DE and SR20DET Parts

[sweeper240]

So I decided to get a s14det notchtop. Its from a 98 spec 2 (has 70,000 km)

If anyone needs parts from the front clip that won't be needed in the swap, let me know. If anyone needs KA24DE parts from my old engine let me know (the KA24DE rods are finished, and for that matter the bottom end is finished as well, however I did drive it successfully @ 70mph about 30+ miles)

I have the front frame obviously so let me know if you want part of it for some reason.

I am replacing the following with new items on the sr20det
(therefore the OEM stuff in the front clip is available for sale)
New FMIC (Blitz?)
New 3" downpipe
New short shifter
New Radiator (Koyo?)
New clutch (Exeddy?)
New Flywheel (Cusco cromoly?)

If anyone has recommendations on what specific brands or types of parts to buy let me know because nothing has been ordered just yet. Swap is going to happen in the next week I suppose.

From the KA24DE i have 2.5 inch headers from DC Sports 4-2-1 (s13)
and 2.5 inch BRM Exhaust (1989-1994 Nissan 240sx (S13) Cat-back Exhaust System | BRM Exhaust (http://www.brmexhaust.com/89-94-nissan-240sx)) - Stainless Steel, 14" Resonator, HiFlow CAT, Magnaflow muffler with Dual tip
- this exhaust exits straight and has very good straight piping from the headers back.

BRM Stainless Steel 2.5 inch with 14in Resonator = SOLD
DC Sports 4-2-1 headers = SOLD

[Jlrios18]

Is the radiator off an automatic?

[leung]

So what exactly are you trying to sell here??

[sweeper240]

Anything that people might need from a front clip s14 and/or sr20det that I won't be using for the swap. anything that I am buying new as described above would indicate that the original item being replaced by new is available for sale.

This s14 front clip is from a 1998 spec 2 Manual Transmission.
The Front clip frame is for sale as well.

[sweeper240]

Also the KA24DE is from a 1993 240sx Manual Transmission. The entire engine or parts from it are available for sale - however note that the bottom end is probably rubbish due to rod knock.

[sweeper240]

From the KA24DE i have 2.5 inch headers from DC Sports 4-2-1 (s13)
and 2.5 inch BRM Exhaust (1989-1994 Nissan 240sx (S13) Cat-back Exhaust System | BRM Exhaust (http://www.brmexhaust.com/89-94-nissan-240sx)) - Stainless Steel, 14" Resonator, HiFlow CAT, Magnaflow muffler with Dual tip
- this exhaust exits straight and has very good straight piping from the headers back.

[Forge_55b]

PM sent for flywheel and headers

[sweeper240]

I still have the following available for sale:

KA24DE
KA24DE flywheel, clutch, and or any parts that would be on a normal KA24DE, the rods knock so the engine itself would need work if you wanted to buy the whole thing for some reason

From the KA24DE i have 2.5 inch headers from DC Sports 4-2-1 (s13)

2.5 inch BRM Exhaust (1989-1994 Nissan 240sx (S13) Cat-back Exhaust System | BRM Exhaust (http://www.brmexhaust.com/89-94-nissan-240sx)) - Stainless Steel, 14" Resonator, HiFlow CAT, Magnaflow muffler with Dual tip
- this exhaust exits straight and has very good straight piping from the headers back.

SR20DET flywheel, clutch, radiator, side mount intercooler

[sweeper240]

SR20DET Flywheel = $80 obo

SR20DET Flywheel bolts - $2/bolt

The other parts previously mentioned are also available still

[sweeper240]

The DC 4-2-1 headers are great and = $300 obo

[sweeper240]

BRM exhaust still available... I will make the decision Tuesday whether to keep it and have the hi-flow cat reflanged to 3" or get a new 3" BRM SS exhaust....

Buy the 2.5" SS BRM Exhaust with 14" resonator from me before Tuesday

[ampd]

pm me i want the sr20 radiator

[sweeper240]

I've sent a pm to you ampd.

[sweeper240]

Brm exhaust is still available... if no one claims to want it im going to have it reflanged and installed into my car. Hurry up

[TaterBiscuit]

Price on throttle body shipped to 40508 please

[sweeper240]

Sorry no shipment available only pickup - Gardena CA

[CptGio]

Short shirt for sale? How much? Good condition? 310-365-8159

[sweeper240]

BRM Stainless Steel 2.5 inch with 18in Resonator for sale still $300

[unknownkris_s14]

U wouldn't happen to have a s14 Zenki hoodlatch byany chance or hood pins, I've had no luck fellow zilvians.;/

[LexSan]

so did you sell the manual transmission for the ka?