isis v2 short shifter

[S14Lee]

i need some help with this product i had it installed on Monday and the shift point from gear to gear was really short distance. Now today it feels like the distance from gear to gear travels longer almost feels like a stock. If anyone running this product having the same problem or maybe something broke. Any help or input will really help thanks

[S14Lee]

Wow nobody running this?

[xGUNKX]

You're used to it or the bushing wore out?

Take it out and check, alot of people wear out the bushing by powershifting jdm style YO!

[S14Lee]

Does the bushing wear out that fast the short shifter was brand new being use to it is not because u can notice a big difference

[xGUNKX]

Some short shifters can mess up your trans as well.
Take out the shifter and check it. Also if you didnt bolt it on right that could have messed it up. The far two bolts are usually hard to bolt on (240)

[S14Lee]

It was installed by a shop car shifts fine it just feels like the travel distance is longer then when it was first put in almost feels like a stock shifter but not as bad as stock

[Hoffman5982]

...Why did you pay someone to install a shifter?

[waxball88]

...Why did you pay someone to install a shifter?
Bro there is like some crazy ring in there that i just can't get out. Must be doin sumthin wrong, i'll jus pay shop 2 do it

[Tommy]

^^haha

Anyways I'm running one for over a year now and never seem to have that problem. Still feels like the first day I installed it.

[kuelee]

its because your use to it..

[S14Lee]

I had the shop install it because I got it from them and plus my car was there getting other stuff done

[Pinggg]

i know what it can be...


driver error

[upsdude]

the problems is not the ring, it's the nut behind the wheel :tardrim:

[slow40sx]

the little plastic cup on the very button could be fucked up, that happened to me once

[future]

Once you have it for a day you get used to it

Thats when you cut the shifter and drill out the knob to go down more, and again. Till you realize its as low as it can get

[dontxploitme]

the little plastic cup on the very button could be fucked up, that happened to me once

the bushing? lol

[Mitsubayati]

If it came with a bushing on the pivot ball, then I'd be willing to bet it got too hot and melted. You should have had the OEM bushing installed. They are like $4 from Nissan.

[S14Lee]

Ok I'll check out the bushing thanks for the help everyone

[S14Lee]

And to everyone saying your use to it I don't see how u get use to a shifter and not tell the difference if it has changed. Please explain

[RandallSharp]

Neural adaptation.

Once you stopped paying attention and got used to the shifter, it doesn't feel as special anymore. Think it really has changed? Have someone with the same shifter measure their throw and then measure yours.

[S14Lee]

I know it has changed am in my car 6 days a week 12 hrs a day but I'm going to measure it with a car when I off and let the shop that I got it from look at it on it

[S14Lee]

Just like my stage 4 clutch still feels the same when I had it stall two years ago how can u not tell if something don't feel right

[xptnike]

i have one, no problem with mine...

[RandallSharp]

Your brain likes to trick you. True story.

Measure it. That's the only way to prove something is wrong. Empirical evidence is your friend.

[TheRealSy90]

$20 says the bushing is the problem.

[twinspool]

Replace that crap plastic bushing with a metal one then you won't have to worry about it, also I have had the same feeling when I first installed the shifter on my car. It was super short then kind of got longer but still better than stock shifting, go a head and put the stock one back in and then you'll notice the difference.

[S-Nation S13]

I thought Isis shifters were shit to begin with, b&m bought 5 years ago and still works and feels brand new