SR240Z
03-29-2012, 05:05 PM
Making a new thread for these because i maxed out the last thread and no real interested buyers... Price DROP!
This brake kit was installed on a friends Silvia S15 right after we had pulled the entire drivetrain to build his motor/chassis/body/paint. The brake kit was only installed and never driven on. The car was being rolled around anywhere. There is no brake fluid yet to have run through these lines. This is the exact same brake kit as the Tein S15.
I consider this kit to be brand new aside from being mounted on the car. There is no wear on any of the rotors or pads, as I emphasize the car was never driven on these brakes. They were only installed to inspect for wheel fitment. It comes with everything you see pictured. This will work on s13/s14/s15 with 5-lug setup. The rear brake kit can retain an e-brake setup if you use the 300zx z32 e-brake assembly.
Price: $1000 shipped!
Specs:
ST40 Front caliper with 355mmx32mm slotted curved vane rotors (14" diameter)
ST22 Rear caliper with 328mmx28mm slotted curved vane rotors (13.12" Diameter)
http://i55.tinypic.com/1jrtqt.jpg
http://i55.tinypic.com/2vs46fm.jpg
http://i56.tinypic.com/8xnfw6.jpg
http://i53.tinypic.com/34isd39.jpg
http://i51.tinypic.com/2zz2c06.jpg
http://i55.tinypic.com/i6cb5g.jpg
http://i53.tinypic.com/r9ex5w.jpg
http://i52.tinypic.com/awoqr9.jpg
http://i53.tinypic.com/kexnhs.jpg
This brake kit was installed on a friends Silvia S15 right after we had pulled the entire drivetrain to build his motor/chassis/body/paint. The brake kit was only installed and never driven on. The car was being rolled around anywhere. There is no brake fluid yet to have run through these lines. This is the exact same brake kit as the Tein S15.
I consider this kit to be brand new aside from being mounted on the car. There is no wear on any of the rotors or pads, as I emphasize the car was never driven on these brakes. They were only installed to inspect for wheel fitment. It comes with everything you see pictured. This will work on s13/s14/s15 with 5-lug setup. The rear brake kit can retain an e-brake setup if you use the 300zx z32 e-brake assembly.
Price: $1000 shipped!
Specs:
ST40 Front caliper with 355mmx32mm slotted curved vane rotors (14" diameter)
ST22 Rear caliper with 328mmx28mm slotted curved vane rotors (13.12" Diameter)
http://i55.tinypic.com/1jrtqt.jpg
http://i55.tinypic.com/2vs46fm.jpg
http://i56.tinypic.com/8xnfw6.jpg
http://i53.tinypic.com/34isd39.jpg
http://i51.tinypic.com/2zz2c06.jpg
http://i55.tinypic.com/i6cb5g.jpg
http://i53.tinypic.com/r9ex5w.jpg
http://i52.tinypic.com/awoqr9.jpg
http://i53.tinypic.com/kexnhs.jpg