PDA

View Full Version : WTB: koni 8610/yellow suspension, z32 upright, 4.64 final drive and z32 calipers


Nacho_240
03-29-2012, 12:03 PM
All parts are going on my S13. I'm located in southern California so locals are preferred.

Want to Buy list:

1. Koni 8610/yellow suspension setup for an S13. I'm willing to run the yellows in the rear only. I'm determined on swapping my rear upright for a z32 aluminum upright so the rear suspension requires a fork type. I'll try to be flexible with the spring rates.

2. Z32 rear upright. Need this to run above suspension setup. Not very many options here.

3. 4.64 final drive. I'm flexible on this one. I'm willing to buy parts only, parts installed in R200 pumpkin, or even the whole pumpkin with diff included (HLSD, 1.5 way or 2 way accepted). If someone has a 4.36 final drive setup, shoot me a price too!

4. Z32 calipers. They must be aluminum and must be 30mm. There is no wiggle room on this one.

Let me know what you got!

Nacho_240
03-29-2012, 10:55 PM
Z32 uprights have been sourced. I should have the z32 calipers pretty soon as well.

Come on guys, I still need the Koni suspension and the 4.64 final drive.

Nacho_240
04-03-2012, 11:45 PM
Still need final drive and koni suspension!! Speak up people!

Nacho_240
04-05-2012, 07:00 PM
4.636 ring gear and pinion can be checked off the list now too.

All I need now is the koni suspension setup. I will also accept partial setups (e.g. custom strut housings, struts only, ground control springs/sleeve/perch). Let me know!