PDA

View Full Version : 18x9.5+35


vjuice602
03-27-2012, 05:34 PM
ok guys i have been looking and looking if these rims will fit in my 1995 240sx all stock suspencion but im not having any luck! i have a guy trying to sell me some xxr 502, i know these arent the best wheels for a 240 but they are pretty cheap, I NEED HELP BEFORE HE SELLS THEM PLEASE!

iamthewinner
03-27-2012, 05:39 PM
They are coming, wait for it.

HiddenCharacter
03-27-2012, 05:43 PM
Yes, they will fit /

vjuice602
03-27-2012, 05:53 PM
Yes, they will fit /


Will they still fit if i drop? Now what tire size do you think are best?

rybo760
03-27-2012, 05:55 PM
im running 18x10 and im pretty low. so they should fit? i have no idea what my offset is though

shalezzz
03-27-2012, 05:58 PM
I'm gonna say it prolly gonna look donked at stock height but what's the worse that can happen

vjuice602
03-27-2012, 06:03 PM
im running 18x10 and im pretty low. so they should fit? i have no idea what my offset is though

you have 18x10 all around??? stock struts and springs?

vjuice602
03-27-2012, 06:07 PM
I'm gonna say it prolly gonna look donked at stock height but what's the worse that can happen

yea it probaly will hahaha, but im already looking into buying coilovers for it

shalezzz
03-27-2012, 06:17 PM
you have 18x10 all around??? stock struts and springs?

Prolly not since he said he was low, but they will fit better if you go low however if you have intentions of going lowish you should buy a better offset than +35 unless your getting that good of a deal on the xxrs

vjuice602
03-27-2012, 06:42 PM
Prolly not since he said he was low, but they will fit better if you go low however if you have intentions of going lowish you should buy a better offset than +35 unless your getting that good of a deal on the xxrs

yea i have been looking for some other rims with a good lip and these are 4 lug, would you happen to know a good place to buy 4 lug rims wit good offsets? no smaller than 18??

vjuice602
03-27-2012, 06:51 PM
Prolly not since he said he was low, but they will fit better if you go low however if you have intentions of going lowish you should buy a better offset than +35 unless your getting that good of a deal on the xxrs

oh and lets say i decide on these rims what tire size would you recomend?

Briou
03-27-2012, 07:08 PM
225 up front, 255 out back is what I am running with xxr962's and I have them tucked into the fenders....well until I did the 5 lug swap....now I have a set of 275 drag radials out back lol

harris180
03-27-2012, 07:16 PM
why are people not ripping into this dude about not posting in the offset question thread??

KiLLeR2001
03-27-2012, 08:10 PM
Reported this reckless thread creation.

97nismo
03-27-2012, 08:13 PM
i am still waiting for it....

vjuice602
03-27-2012, 09:45 PM
why are people not ripping into this dude about not posting in the offset question thread??


Ok im still new to zilvia and i didnt know it had an offet question section... Im am so sorry this caused you to get upset and probaly mest up your day....I seriously dont know why people have to be assholes about this when they could easily just inform that i am not posting in the correct section

vjuice602
03-27-2012, 09:46 PM
Reported this reckless thread creation.

Greatly appreciated man!! Thank you ! You are the best !=D

winter
03-27-2012, 09:46 PM
those wheels would look perfect for your donk. instantly will get you hoodrch status & all the hoodrat chicks will want yo d*ck.

vjuice602
03-27-2012, 09:47 PM
those wheels would look perfect for your donk. instantly will get you hoodrch status & all the hoodrat chicks will want yo d*ck.

Thats what im aiming for:) i need some hoodrat love

97nismo
03-28-2012, 06:22 AM
^ hope your found what u needed...mr arizona.

Brentbohn
03-28-2012, 06:50 AM
I am running 18x9.5 +22 with a 5mm spacer up front and even thouh I have coil overs it comes close to hitting them, pokes a bit out the fender... you wont have poking issue with your lame offset but contact with the strut might happend, be prepared to pick up some bolt on 15mm spacers or if your ballin look for some 25mm bolt on spacers in front and a 30mm in rear, roll your fenders and buy some god damn coil overs.... that is unless you want to look like your from florida or louisana... damn donks!

Phlip
03-28-2012, 06:55 AM
why are people not ripping into this dude about not posting in the offset question thread??

Reported this reckless thread creation.

I actually commend people for not burning this one down in flames