What Spec Wheels Does Everyone Have?

[brianglawson]

Ok to unclutter the forum and help on peoples questions on fitment of wheels, im starting this thread for people to post what size/offset wheels they have and if they clear there brake setup(if not stock) and if it clears their suspension(if not stock). I think this would be a good way to do it, post pics too if at all possible, this should help everyone.....

ill start with my temporary wheels.......
Old School 280zx Turbo Swastikas 15x6 +12 offset
They wont clear z brakes but they would coilovers

http://images.cardomain.com/member_images/3/web/411000-411999/411958_64_full.jpg

[russian]

Fn01r-c 5zigen's 17*8 +35

http://images.cardomain.com/member_images/3/web/507000-507999/507449_2_full.jpg

[Red Comet X]

Stocky Stock :naughtyd:

[Siizzzoooo]

5Zigen FN01R 17x8s +35mm all around with 225/45 tires
Clears Eibach Sportlines on KYB AGXs just fine

[nightwalker]

ugly poo-poo 15x7 wheels +10 offset though. 195/55/15 Works fine for me. Clears my coilovers, but I don't know if they will clear Z brakes. I'll find out soon enough.

[memphiss13]

Fn01r-c 5zigen's 17*8 +35

http://images.cardomain.com/member_images/3/web/507000-507999/507449_2_full.jpg

any side pics of your car? i want to see how close they are to the edge of the fender.

[Rennen]

Great Thread! this could be a valuable resource if everyone posts their wheel fitment.

All I can contribute is '02 Nissan Sentra SE-R SpecV wheels 17x7 +47ish offset.

http://www.imagestation.com/picture/sraid82/p7bbe2f1746a121e80e760f6ce9e026e6/fae8b2ab.jpg

worse brake clearance than stock 7 spokes, also less suspension clearance.

-Matt

[russian]

any side pics of your car? i want to see how close they are to the edge of the fender.

here. hmm this message is too short :naughtyd:

[toreno]

check the Sig

[DoriftoSlut]

R33 GTR 17x9 +30 (will clear Z/R32.3.4 brakes, etc..) (WILL NOT clear JIC FLT-A2 without 5mm spacer).
FN01RC 17x9 +15 (everything)

WHAT I RUN, since it is different:

17x9 +10 (20mm spacer on GTR wheels, 5mm on FN01RCs) all around
215/40/17 F
215/45/17 R, sometimes 225/45/17 (on the UGLYASS 5Zigens)

This is on PS13 COUPE (yeah thats right... 180sx what?) with stock fenders (rolled and slightly pulled)

GOOD pics will be posted once i take them. Old pics suck cause its not this current setup (diff. tire sizes).

[LanceS13]

Borbet Type-T
16x7.5"
+35 offset
19lbs. (heavy!)
225/50/16 Victoracers
clears stock brakes, should clear Z brakes just eyeing it.
clears stock shocks by 1cm.

[240Degrees]

http://www.imagestation.com/picture/sraid97/p49b3db3c3fbb8b03b000c0a2e707cda4/fa114541.jpg
15x7.5 0 OFF enkei mesh BALEEDAT! sorry i dont have a better pic on imagestation right now.

and
http://www.imagestation.com/picture/sraid80/p5d6663da62151e909552b91a9eb7e82f/fb070029.jpg
15x6 +30 OFF s12 200sx

both clear coilovers nicely.

[nokeone]

17x9 +15 FN's...yeah yeah...fuck you if you don't like them mr K..lol :p...they are CHEAP CHEAP...that is what matters...:)

[Zemus]

I have 15x7 Black 5star American Racing with +35 offset (which I am giving to my gf to put on her 240)
I have some 15x7 Riken Meshs with a 0 offset, I have some crazy oldschool 15x7 with a -2 offset, Ill get pics ones summer comes, Also all my wheels clear coilovers, but non of them clear the brakes. Ill more than likley get some K1s for the front if I ever get bigger brakes, and just rock a spacer.

[Dousan_PG]

16x7 0 offset 205/45/16 (i forget) and 215/45/16
clears coilovers, not zbrakes due to being a mesh w/ lip...spoke design
http://www.imagestation.com/picture/sraid52/p1881af5a5123c89e1e35ff145086490e/fc9834e4.jpg

before camber
http://www.imagestation.com/picture/sraid52/p7927ed6f400c9ce3887510ae893cf6b4/fc9834e0.jpg

15x7 +27 kosei K1 205/55/15
clears coilvoers AND z brakes, no spacer
rear is 15x6.5 +14 or so clears coilovers, not z brakes 205/55/15
http://www.imagestation.com/picture/sraid44/pec1747147414e6cde1bc82da6a13e55f/fcdc0bab.jpg
weeeeeeeeeeee

15x7.5 +17. needed 30mm spacer to clear z brakes well. cleared coilovers w/o spacer 205/55/15
http://www.imagestation.com/picture/sraid49/pa60b45bdf872335dc4fcf9470d3a119a/fcb5a282.jpg
http://www.imagestation.com/picture/sraid49/p55510f9bb6389ab8e21b0ba6554cc6ea/fcb5a02d.jpg
rear is same as previous
http://www.imagestation.com/picture/sraid49/p92e3f7418fed01c70f73f3b2ffe0ab0d/fcb59f26.jpg

damn my 'sleepy eyes' look sooo gay that high! haha
front is 15x7 +27 kosei k1...same as before
rear is 15x7.5 +17 ..same as before
http://www.imagestation.com/picture/sraid55/pb88f346d1dbdea6d86b9ef425fe1cc7a/fc7a5e90.jpg



front kosei k1
rear ssr longchamp xr-4 15x7.5 +5
clears coilovers NOT zbrakes 205/55/15
http://www.imagestation.com/picture/sraid55/paefe91eb0d277ff202704df522248aa2/fc7a5b50.jpg
http://www.imagestation.com/picture/sraid55/p8e5237554eac89eab90b35f1f2c01a98/fc7a5dbc.jpg


rear is 15x7 +15 SSR Reverse Mesh clears coilvoers NOT zbrakes 205/55/15
http://www.imagestation.com/picture/sraid69/p964be2dab492689aea6b2eca8fb0af90/fbab1e87.jpg

blitz type 03 17x8 +28 215/45/17
WILL NOT clear coilvoers/zbrakes (in this offset)
used 20mm spacer
http://www.imagestation.com/picture/sraid74/pe8927ce7da7d5714304560a8d41894a3/fb62af68.jpg
i cant find more pics..super sunk. blah

front
demon camber 205/55/16
16x8 -15 (yes negative 15)
will clear coilovers and z brakes (thanks for the loan sam--jspec.com)
http://www.imagestation.com/picture/sraid83/pa833b2f983645767ab8bb340b6d26175/fad32c2d.jpg
rear is same as before (blitz 17")
http://www.imagestation.com/picture/sraid83/pfc3ec585b4b2f783dbd3614d1646120d/fad32c35.jpg
wide fenders REQUIRED
http://www.imagestation.com/picture/sraid84/p24bff1edfbdb6e6207127999b4050e9a/facdb6a7.jpg
http://www.imagestation.com/picture/sraid84/p6c2221dfe602c28276866b13be29cab5/facdb7ba.jpg


and where im at now

17x9 +15 5Zigen Fn01rc 215/45/17 clears coilovers and brakes
http://www.imagestation.com/picture/sraid94/p2cfb6d1b16f51377afb42553eb2ab658/fa393c85.jpg
http://www.imagestation.com/picture/sraid94/p72852a70e13477c355224ff816166c32/fa393380.jpg

[brianglawson]

damn dousan all those sexy meshes and especially the longchamps...mmm gotta love the old school rims...

[Dousan_PG]

they are cool if you want to keep that old look (zenki/chuuki)
personally i like the modern look....soo out w/ the mesh 15s...

all those wheels have been owned over the period of 1.5 years! so many wheels, so little time. i also had a set of z32 wheels and some more steelies, and SE wheels as well as some other mesh ones..haha..too much
i have 6 FN01rc 17x9 +15 and more wheels coming up soon..

[sykikchimp]

Nismo LM-GT2

front: 17x8 +35 215/45-17 (less than finger width b/w tire and spring. Would not clear coilovers with a wider tire.)
Rear: 17x9 +38 215/45-17 (can fit my entire hand b/w tire and spring.)
clears z-brakes.
http://charles.sykikchimp.org/images/Nismo/rear-wheel-flush.jpg
http://charles.sykikchimp.org/images/Nismo/front-wheel-flush.jpg

[brianglawson]

i cant wait to see your car when its painted and stuff man, its gonna be sexy

[FastBack 240]

17x7 O.Z. Superleggera's

[Red]

Work wheels... 18x8.5 +32 front... 18x10 +40 rear... I have RS*R's and AGX clears with a bit of room... Ohh and 235-40-18's front and 265-35-18 rear...

I'm guna buy the Tein flex and pull my fenders to add some spacers... Or just get new wheels. Thats a later mod... turbo next

EDIT: Forgot to add... This is on a 240sx-se S14

[CleanS14]

Stern Face II Beast 18x8.5, 18x9.5 (offsets to be determined soon) Sorry I just don't know the offsets because I had the centers swapped...
http://www.onetongarage.com/sterns.jpg

[DoriftoSlut]

Dirty D, you forgot to say that in most of those pics you were running a (30mm?) spacer with your Kosei's. 15x7 +27 is not that FLUSH even though it clears brakes and coils...

And also, you have 17x9 +10 (copycat) up front right now. 5mm spacer cause Tein HE's have teh suck collar design...

Man, do i have to do eveything for you?

[hybrid_eg]

Mine are i believe Riken Mesh or Enkei Type 88, 15x7.5 not quite sure how to tell the difference with +15 offset..
http://www2.freepichosting.com/Images/153377/13.jpg

I'm looking for the same identical wheels in 16x8 +0 Offset.. if you know someone let me know, tks

[nokeone]

And also, you have 17x9 +10 (copycat) up front right now. 5mm spacer cause Tein HE's have teh suck collar design...


weird...my FN's didn't rub on my HEs..:confused:

[Heartwork]

http://www.imagestation.com/picture/sraid101/p036ac9414f8407c0ddb4200592a45a8e/f9d05ded.jpg
http://www.imagestation.com/picture/sraid101/p8021182348d01cb2af334d849d599f0b/f9d05def.jpg

Gram Lights 57S
17x8.5 +22 215-40-17
17x9.5 +22 235-40-17

http://www.imagestation.com/picture/sraid101/p18b33484788b2fe73482f22e07c7194b/f9dd727f.jpg
http://www.imagestation.com/picture/sraid101/pe461096abc4eca72f400540f47ad1735/f9dd710d.jpg
http://www.imagestation.com/picture/sraid101/p730320c224e228b5b0234168bcd84cb5/f9dd710f.jpg
http://www.imagestation.com/picture/sraid101/p0ad09180c56665cd1233ad56b6d76695/f9d0588e.jpg

Works S1C
18x9 +20 225-40-18
18x10 +13 245-40-18

rolled fenders up front
pulled fenders in rear

[hybrid_eg]

Hey Heartwork, is that your friends S13 in the back ground? the one w/gold SSR's? Do you have the specs on those? SSR Reverse Mesh doesnt come in gold from at least what their website says, any info on this? pls let me know, tia

[Dousan_PG]

weird...my FN's didn't rub on my HEs..:confused:

because your car isnt as low as mine

[nokeone]

because your car isnt as low as mine

really?..hmm..at what height does it start rubbing?..i'll have to look into it..cause on my next coupe i was planning on slamming the shit outta it to tuck the FNs...

[Dousan_PG]

um..when the front 215/45/17 are slightly under front fender..it rubs. juuuust barely. a 3mm spacer should clear it ok. i only had a 5mm front lindsay hanging around.

[nokeone]

cool cool..thanks man..i'll pick some up next time i'm down south chillin with you guys..:)

[West]

Here are my front BBS RS 17x8 +35 235/45/17 - Will clear Z Brakes as seen, will not clear Coils without 5mm spacer or SUPER small tires.

http://www.zilvia.net/rides/west/mw13/bbszbrakesbefore/DSC02844.JPG

http://www.zilvia.net/rides/west/mw13/bbszbrakesbefore/DSC02843.JPG

http://www.zilvia.net/rides/west/mw13/bbszbrakesbefore/DSC02847.JPG

Here are the rear's BBS RS 17x9 +35 - 255/40/17 - which arent on the car right now. Im waiting to get a alignment and finally set my camber so they dont stick out like this. They will fit fine with the right camber setting, right now id imagine the fuggers are set to like +3 camber:bite: Will clear coilovers.

http://www.zilvia.net/rides/west/mw13/bbszbrakesbefore/crap.JPG

http://www.zilvia.net/rides/west/mw13/bbszbrakesbefore/rear1.JPG

Ill update pictures once I get the alignment.

[brianglawson]

maybe this thread should be stickied for people to look at when deciding on wheel choices, that way the enevitable question "will this fit" wont happen nearly as much

[Zemus]

Mine are i believe Riken Mesh or Enkei Type 88, 15x7.5 not quite sure how to tell the difference with +15 offset..
http://www2.freepichosting.com/Images/153377/13.jpg

I'm looking for the same identical wheels in 16x8 +0 Offset.. if you know someone let me know, tks

Those are Riken Mesh's and their 15x7, I have the same in 0 offset, lovin em, but mine will be gold, well once i paint them

[hybrid_eg]

Those are Riken Mesh's and their 15x7, I have the same in 0 offset, lovin em, but mine will be gold, well once i paint them

Cool, thanks for info ZEMUS, i'm pretty sure they made them in 16 since my friend has them but his offset is like 32.. weak lip.. i think his are 16x8 just the size i'm looking for with 0 offset.. where did you get yours if you dont mind me asking? The 16's i want to get i will probably powdercoat gold.. and of course i'm never selling these 15's hehehehe

[Zemus]

hah yea, i got mine on ebay for 245$. All 4, you are better off getting some episonlons (that is NOT how you spell it) You can get those in 16x9

[BuudWeizErr]

I have a 5 Lug S13.

I roll daily on S14 SE's. 16x6.5 +40 with 205/55ZR16 Kumho's
For drift, I use my R32 GTS-T's, 16x6.5 +40 with 205/55ZR16 Falkens

Both wheels clear my 30mm Z32 brakes and both clear coilovers, without spacers for brakes or coils.

[bob marley]

Volk Racing CE28N
17x7.5 +25 215/45/17 Barely tucked in
17x8.5 +30 245/40/17 Flush

Haven't tested it, but I'm 99.9% sure it will clear z brakes. It clears my kei office gu coils. I'll post pics when I upload them from my camera.

[No Motiv]

Enkei Mesh... 15x7 0 offset word up

[nokeone]

oh yeah, i forgot the picture with mine...this was 17x9 +15 with wide body fenders..i think they needed a spacer and i would have wanted more camber because in my opinion they were still not flush enough..if i had it to do over again i would have stuck with stock fenders or i would have spaced them out at least another 5mm:

http://images.cardomain.com/member_images/1/web/217000-217999/217409_78_full.jpg

[brianglawson]

sweet... noke i like the primer with black..lol

[nrcooled]

Volk SuperFine Mesh
16x7 front +35
16x8 rear +38

http://members.cox.net/nrcooled20/newside.jpg
http://members.cox.net/nrcooled20/240%20exhup.jpg

Will clear c/o but will not clear z-brakes w/o 10mm spacers

They do not have the JDM uber flushness

[BoroBoroS13]

16X7F/16X8R Impul R1 2 piece mesh. :)

http://www.imagestation.com/picture/sraid100/pf7bd7ed5ab9610f92993e3777cd34c34/f9e2ffb3.jpg.orig.jpg

[wanganwonder]

enkei apache 15x?? +20. nice 2" lip. front is near flush, rear has much camber and tucks tread.

[brianglawson]

anyone else wanna share their wheell info

[wylin]

14x6.5 - 10 daytons with bolt on spinners

[Var]

14x6.5 - 10 daytons with bolt on spinners


:wtf:

and your quote

"friends dont let friends drive KA"

:wtf:

[Touring240]

front : Buddy Club P1 16x7.5 +22 225/45/16 yoko es100
rear : Weds Sport Fins 16x8 +23 245/45/16 yoko es100
clears 26mm z brakes by a mile and coilovers. rolled rear fenders
needs alignment
http://www.imagestation.com/picture/sraid102/pc36eec94d0f95384daadf6a00e4b4f43/f9bb6840.jpg
http://www.imagestation.com/picture/sraid95/pb224c1eb10dfcc31dd87a5976954e785/fa2e7f4a.jpg

[240Stilo]

17x8 +35 wheels all around
215/45 tire did not rub in front but my new 235/45's do. This is on TEIN S Techs and KYB AGX.
Pretty sure they will clear Z brakes since Mark has the same spec wheels and clears. But, I'm 100% sure they clear q45 brakes.

I had to remove the lining inside the front wheel well and move the wiring that runs inside wheel well because the tires were eating it. SO, one piece of plastic removed and a ziptie later no more rubbing. Here's a pic of how the wheel looks like on the backside.

[wylin]

17x8 +30 17x9 +35 Hoshino Impul RS3

235/40ZR17 265/40ZR17 ES100

Clears most coilovers if you run a 5mm spacer or down size tires to 225 width.

Clears my s15/z32 brakes no problem

I like my quote its hilarious.

[seiyess]

5-zigen fn1r-c bronze... 17x8 +27 / 17x9 +35 235/45/17 & 255/45/17 hankook tires..
this pix was before my car was dropped.... looks so high..~
i have stock brakes and tokiko blue shocks.. i think wheels can go out a little more...

[adey]

15*7 +5 205/55/15 clears coilovers but not even stock brakes up front. Rear clears brakes and coilovers, need to roll fenders or mucho camber to clear fenders (f/r).

15*8.5 ~+20 205/60/15 clears coilovers and brakes rear, probably won't clear anything other than coilovers front.

16*8 +36 205/55/16 clears brakes f/r clears coilovers R but needs 5mm spacer to clear coilovers front. Fenders no problem.

[stealthj]

hmm....im running stockos alloys on both cars

hmm....i think imma need a five lug swap to get access to some of those nicer wheels....

[typhoonslippery]

Super Advan SA3R 17"
http://members.shaw.ca/typh00n/47.jpg

[brianglawson]

ohhhhh sa3r in 17, my fav. wheel

[CleanS14]

Baby got some new shoes... figured I'd post... this morning when I got to work...

Bronze Volk GramLight 57s 17x9.5 +22mm
http://www.onetongarage.com/jays14/s14br57s.jpg

[BadMoJo]

looks good.... but it also looks like a chop for some reason....

[CleanS14]

looks good.... but it also looks like a chop for some reason....
Hmmm some people said the same thing... but I'm running 4deg neg camber up front and 3 in the rear... slammed it this morning in the parking lot... I gotta raise before I head home cuz I'm scraping hahahaha...

just ask around... I wouldn't chop photos... I'm down like that hahahaha

[GlacierFreeze]

Deffinitely not saying it's chopped, but the lighting and quality make it look weird.... Beautiful rims though.

[HiPSI]

M2 DT05R 17x8.5 +25 front and 17x9.5 +30 rear, 225/45-17 and 245/45-17 tires respectively. clear Z32 brakes and apexi world sports coilovers just fine without spacers. rears rubbed on big bumps until i rolled the fenders, fronts rub plastic fender liners (but those will be gone soon and car will be dropped a good bit more).

http://images.cardomain.com/member_images/4/web/484000-484999/484203_9_full.jpg
http://images.cardomain.com/member_images/4/web/484000-484999/484203_11_full.jpg
http://images.cardomain.com/member_images/4/web/484000-484999/484203_13_full.jpg

[CleanS14]

Deffinitely not saying it's chopped, but the lighting and quality make it look weird.... Beautiful rims though.
Thanks bro... yeah I'm using some guy's camera and he has it set for all kinda weird crap... I'm not a camera guy... so i just took the pic... he says it sucks... hahaha

I'll take better ones later... with my cheap camera!!! hahahaha

[Heartwork]

Baby got some new shoes... figured I'd post... this morning when I got to work...

Bronze Volk GramLight 57s 17x9.5 +22mm
http://www.onetongarage.com/jays14/s14br57s.jpg

HOT!!
def. not a pshopped since i saw it in person last night! :D

heres a couple new ones of mine i took over the weekend
http://europrojektz.com/images/jerjer0.jpg
http://europrojektz.com/images/jerjer1.jpg
http://europrojektz.com/images/jerjer5.jpg

[the240sxer95]

sighh, NICE WHEELS! =] damm you 2 (jay and heartwork) nice ass cars =]

btw.. most of jay's pictures look photoshoped! iuno why is it me?

[ootranceformeroo]

http://europrojektz.com/images/jerjer0.jpg


This picture looks pretty cool with the blurred backround... :p

[brianglawson]

cmon people elimnate the wheels questions give examples...:)

[ultraprince]

5zigen FNO1R-C silver
17x8 +25 245/40/17
17x8 +42 275/20/17

i think the offset my be switched around. i forget.

[Salty_X]

M2 DT-05R (Hyperblack)
F: 17x8.5 +25 215/45/17
R: 17x9.5 +30 235/40/17

Clears coilovers by just a bit ... Tein HEs. Clears Z brakes with ease though.
Rears are very flush, fronts aren't as flush as I want though. We'll see how S14 LCAs changes that. :)

[nightwalker]

15x7 +10 all around!

flushy flushy!

[SilviaDriver]

5Zigen Fn01r-cs [hyperblack]
17x9 +15
18x9.5 +12

[exitspeed]

this is seriously one of the most helpful threads I've seen on here. This should be a sticky!

[Shin_Kudo]

Steelies =P. Well, at least they clear my TEIN HEs.

[undercoverdjay]

how can people get away with this setup? My 9 inch SSR GT1's rub in the rear. I ran KYB AGX's with sustec springs which dropped it 1.8 in the front and 1.6 in the rear. I assume the rate was wrong because it blew my drivers side rear shock. I put my stock rear springs in and had it aligned with no camber + or - and my shock set on 8 it'll still rub under hard cornering. And I see people running 9.5's and 10's thats nuts. Why cant my car be normal and just work?

[adey]

Ooh! new photos.

16*8 +16 front (+36 w/ 20mm spacer)
http://www.bridgejumpers.org/wtf/front_flush_apr_04.jpg

Again. Rears are 15*8.5 offset unknown... roughly +15 or +10 or so, I'm guessing.
http://www.bridgejumpers.org/wtf/sex_apr_04.jpg

edit: Front fenders NOT ROLLED, DO NOT RUB. 205/55/16 tires.
Rear... thinking about it, must be closer to +5 offset... if not +/-0. It's hard for any positive offset 8.5" wheel to rub in the rear, esp. since I have rolled fenders!!

[TheTimanator]

how can people get away with this setup? My 9 inch SSR GT1's rub in the rear. I ran KYB AGX's with sustec springs which dropped it 1.8 in the front and 1.6 in the rear. I assume the rate was wrong because it blew my drivers side rear shock. I put my stock rear springs in and had it aligned with no camber + or - and my shock set on 8 it'll still rub under hard cornering. And I see people running 9.5's and 10's thats nuts. Why cant my car be normal and just work?
EDIT: forgot, I directed you to this thread :D
Many of these guys are running negative camber and streched tires to make them fit, as well as rolling fenders. (some pull fenders too). What exactly is it rubbing anyway?

[Salty_X]

^And what offset?
Maybe you have 9 +45 or something weird like that.

[TheTimanator]

Since this thread is back.....
http://images.cardomain.com/member_images/6/web/594000-594999/594002_2.gif
http://images.cardomain.com/member_images/6/web/594000-594999/594002_3_full.jpg
Riken Mesh 15x7 +17 offset on stock suspension :-/

[adey]

how can people get away with this setup? My 9 inch SSR GT1's rub in the rear. I ran KYB AGX's with sustec springs which dropped it 1.8 in the front and 1.6 in the rear. I assume the rate was wrong because it blew my drivers side rear shock. I put my stock rear springs in and had it aligned with no camber + or - and my shock set on 8 it'll still rub under hard cornering. And I see people running 9.5's and 10's thats nuts. Why cant my car be normal and just work?
it's because you're probably running 255/40 or 275/35 tires or something ridiculously (and most likely UNNECESSARILY) fat like that. people who run 9" wheel with +10 offset and DON'T rub have rolled fenders and run 215/45 tires. :)

[TheTimanator]

Wow adey, your good. He's runign 255/40/18's
http://www.zilvia.net/f/showthread.php?t=52891&highlight=offset

[HaLo]

Volk Racing Group-AV
17x7 +29
17x8 +35
http://www.supraquebec.com/halo/12.jpg

SSR Reverse Mesh
16x7 +25
16x8 +26
http://www.supraquebec.com/halo/advan11.jpg

Both are flush... SSR's won't clear 300ZX brakes. Volk might. Both will clear coilovers.

[Dousan_PG]

the volk are definately NOT flush
but they do look hot! :)

[HaLo]

Thanks Aaron! ;) They kinda looked flush to me. ;) Oh Well.. At least they are hot! :D

[undercoverdjay]

I understand that on a KA 255's are quite overkill. but I bought these wheels and tires around an SR20DET that I'm having installed by Enjuku racing. With the right tuning the budget I'm looking to spend will net me around 350-400RWHP Then 255's will hopfully be the ticket. But regardless of whatever setup I have under the hood they'll still rub. Honestly before I adjusted the rear camber they hit inside the wheel closer to the body. Once I pulled them out they hit that lip thats on the outer part of the fender well. I have a 38mm offset wheel. Maybe since I'm in the market for new tires, go with a narrower tire and a shorter profile? Or keep the 255's and a spacer. and not too sound like too much of a noob but what exactly is rolling the fenders?

[brianglawson]

Hey everyone, since the thread is kickin again..... i figured id post my new setup...
'98 Cobra wheels 17x8 +30 with 225/45/17's all the way around....clear my 300zx 30 mm brakes...should barely clear coilovers....and if you have mudgaurds like my car, they will rub like hell at half lock...i still gotta take them off:
:D
http://www.imagestation.com/picture/sraid114/padf0bc72a325cc7f123710f225617322/f8d2a366.jpg
http://www.imagestation.com/picture/sraid114/p1f891d3ef991f244bf454a2c5a92960b/f8d2a407.jpg
http://www.imagestation.com/picture/sraid114/pb7f4012898d4c4b18c06c38907c1b6fd/f8d2a34d.jpg

Halo....love the volks man....
still think the thread should be a skicky:D

[adey]

I understand that on a KA 255's are quite overkill. but I bought these wheels and tires around an SR20DET that I'm having installed by Enjuku racing. With the right tuning the budget I'm looking to spend will net me around 350-400RWHP Then 255's will hopfully be the ticket.
<snip>
I have a 38mm offset wheel. Maybe since I'm in the market for new tires, go with a narrower tire and a shorter profile? Or keep the 255's and a spacer. and not too sound like too much of a noob but what exactly is rolling the fenders?
255s are probably overkill even for an SR with bolt-ons! Maybe when you have 400hp it'll be of use... but before then, I don't think they're giving you anything but slow acceleration...
I've not heard of wheels rubbing the chassis side of the rear fender well, that sounds REALLY scary... but rubbing the inside of the fender is normal; you just want to make sure it's noto cutting into the side wall of the tire. That's why we roll fenders. You can search on the forum, there've been a lot of threads. Try the FAQ forum. Basically there's a lip on the inside of the fender that gets in the way of your wheels when they're wide and have low offsets. You take a heat-gun and hammer to this lip, and flatten it out so that you have more room for the tire/wheel.
Until you reach your magical 400hp number, I'd recommend 205s and 215s on a KA, and then maybe 215-235 on the SR, depending on when you get it and how much power you have.

If I had 17*9 +38 wheels with 255 tires on them, I'd swap it out for a 205/45/17 (or 215/40/17) and throw a 20 or 25mm bolt on spacer on there, too. But that's just me under my Pink Godzira influence. :whip:

[sideviewcivic]

Eagle type 28 wheels 15x7 and 15x8 (fronts) 15x10 (rear) on there way to my house, yah imma be tire stretching like whoa when i get them. offset im not worrying about since a have a pair of 25mm billet alum. spacers.hey danny, you think aaron or lindsay wud pull my fenders once i get them dropped on??

-Aaron

[mk20116]

17x9/245-45 +10 w/5mm h&r spacer & 60mm nismo wheel studs.

btw - thread is good info for people

[stp9154]

Gram Lights 57C 17x7.5 front with 215/45 and 17x8.5 rear with 235/40. Might get 10mm spacers for the rear soon.

[nokeone]

If I had 17*9 +38 wheels with 255 tires on them, I'd swap it out for a 205/45/17 (or 215/40/17) and throw a 20 or 25mm bolt on spacer on there, too. But that's just me under my Pink Godzira influence. :whip:

not the influence..just the smart thing to do...lol..

now talk about rediculous:


5zigen FNO1R-C silver
17x8 +25 245/40/17
17x8 +42 275/20/17


does that even exist?..lol

[mk20116]

does that even exist?..lol

i've seen 17x?/275-45 on a race s15 at discount tire a while back...they had on it overfenders and a moderately low offset. not near negative offset though

but that seems....odd

[nokeone]

i've seen 17x?/275-45 on a race s15 at discount tire a while back...they had on it overfenders and a moderately low offset. not near negative offset though

but that seems....odd

yeah 275/45's sure...but not 20 series...lol :loco:

i was thinking it was made up or typo... :wiggle:

[S14DriftR]

Volk superfine mesh
16x7.5+22 with 205/55/16 clears coilovers but not 26mm Z brakes. requires camber and rolled fenders when going low, front tire is tucked about 1/2" and rears about 1/4", pic is shown at recommend height on he's
http://images.cardomain.com/member_images/11/web/359000-359999/359882_70_full.jpg

also using a pair of 5zigen typhoons 17x8+35 with 245/40's in rear sometimes, clear coilovers and doesnt rub at same suspension settings. No pics yet

[boro240]

right now i have 15x6.5 +19 Volk Mesh.

as soon as possible they will be 15x7.5 +6, or maybe 15x8 +0.

[Bliss]

yeah 275/45's sure...but not 20 series...lol :loco:

i was thinking it was made up or typo... :wiggle:

i dont know of any company that makes a 275/20/ANYTHING, let alone a 17. If anything, itd be a 275/20/20 or something. I HAVE seen 25 series tho. I cant believe sidewalls are getting that small.

[tastyratz]

Lets keep this thing alive, bump for a good thread. lets try to make this alot easier to read though lets develop some sort of format to posting your sizes

car? (ex s13)
full wheel size + offset (ex 17x9 +20 all around)
Tire size (ex. 235-45-17)
fitment modifications (ex widebody rears, rolled/pulled fenders, etc.)
Coilover / brake clearance (what kind of coilovers do you have and what brakes are you running?)

( i used my plans for when i buy my wheels he he)

Could a mod clean up this thread a little bit? This is awesome information and its great to have around to help cut down will this fit threads. keep em comin guys!

[sil40sx]

i have the 240sx limited edition wheels. fnoir-c 17x9+15 17x10 +25

[brianglawson]

nice car sil40zx, im in agreement with tastyrats, that we should sticky this thread, good info in it:)

[mellojoe]

stock wheels
Eibach ProKits + KYB AGX
Infiniti Q45 brakes (2-piston caliper, 11" rotors)

fitment is perfect. No problems. need bigger wheels. :p

[nocomedown]

Heroes Racing Mesh (don't see too many of these around)
15X6.5 +16 all around (yeah i know weak size, but at least it's a good offset)
http://img77.photobucket.com/albums/v233/nocomedown/DSCN0464.jpg
http://img77.photobucket.com/albums/v233/nocomedown/DSCN0468.jpg
yeah yeah, i know, wheel gap blah blah blah. if someone wants to donate some money to my new struts and springs/coilover fund, then i'll get it fixed.

[b18c1ek]

I'm about to order a set of 15x7.5 wheels with -5 offset for my S13. I'm contemplating either a 195/60 or 205/55 tire. I don't wish to pull or roll the fenders, I don't have Z brakes, but I do have Silkroad coilovers with front camber plates... can someone tell me whether this combination will fit my stock bodied S13 with the tire sizes listed above? Does anyone have any pics with a similar sized wheel on their S13?

BTW, currently running 17x8 Fr +38 (plus 5mm spacer, effective offset is +33), 215/45 and 17x9 Rr +38, 245/40 SSR Varden Sport wheels, with no fitment issues. Pics are in the link on my sig. These wheels will be for sale soon.

Thanks

[Flybert]

I'm about to order a set of 15x7.5 wheels with -5 offset for my S13. I'm contemplating either a 195/60 or 205/55 tire. I don't wish to pull or roll the fenders, I don't have Z brakes, but I do have Silkroad coilovers with front camber plates... can someone tell me whether this combination will fit my stock bodied S13 with the tire sizes listed above? Does anyone have any pics with a similar sized wheel on their S13?

BTW, currently running 17x8 Fr +38 (plus 5mm spacer, effective offset is +33), 215/45 and 17x9 Rr +38, 245/40 SSR Varden Sport wheels, with no fitment issues. Pics are in the link on my sig. These wheels will be for sale soon.

Thanks

If you aren't planning on rolling your fenders, don't even think about it. Why don't you want to roll them? What's the big deal? I would suggest pulling the rear as well. Sam from JSPEC let me borrow some wheels for the drift comp last weekend. They were southern ways mesh at 15x7.5 +4 with 195/55 and they stuck out beyond the fender. I hammered the lip of the fender in and was running -1.75 degrees camber and they worked without rubbing. Your are going to stick out another 9mm and be sporting wider tires. You are screwed unless you want to run more than -4 degrees camber. Or you could always go mexicali style rubbing the whole way. Might wanna run a wheel spacer to get them beyond the fender. AHAHA

[KasperSlide]

so if you want a lip on the wheels you need a positive off set. :ugh:
kind of a stupid Q

[TheTimanator]

so if you want a lip on the wheels you need a positive off set. :ugh:
kind of a stupid Q
the lower the offset the larger the the lip will be.
7" wide +40 offset = no lip
7" wide 0 offset = 2" inch or so
7" wide -20 offset = big lip but requires wide fenders.

Also, it depends on the design of the rim.

[b18c1ek]

If you aren't planning on rolling your fenders, don't even think about it. Why don't you want to roll them? What's the big deal? I would suggest pulling the rear as well. Sam from JSPEC let me borrow some wheels for the drift comp last weekend. They were southern ways mesh at 15x7.5 +4 with 195/55 and they stuck out beyond the fender. I hammered the lip of the fender in and was running -1.75 degrees camber and they worked without rubbing. Your are going to stick out another 9mm and be sporting wider tires. You are screwed unless you want to run more than -4 degrees camber. Or you could always go mexicali style rubbing the whole way. Might wanna run a wheel spacer to get them beyond the fender. AHAHA

I didn't want to roll or pull the fenders because if it's not done right, it would look horrible, and if I decide to run normal wheels later on, the pulled fenders would look awkward. I don't mind running camber as long as it's not over exaggerated, besides how functional is -4 degrees camber for daily driving? also, I found the same wheels in 15x7 with a +32 offset. If I run the 205/55 tires on these rims, how tucked would they be? Thanks for the input.

[Tuned240]

stockers in gunmetal spray paint.

[Flybert]

I didn't want to roll or pull the fenders because if it's not done right, it would look horrible, and if I decide to run normal wheels later on, the pulled fenders would look awkward. I don't mind running camber as long as it's not over exaggerated, besides how functional is -4 degrees camber for daily driving? also, I found the same wheels in 15x7 with a +32 offset. If I run the 205/55 tires on these rims, how tucked would they be? Thanks for the input.

-4 degrees camber is HORRIBLE for daily driving and for track driving. I think a few 86 guys run that much up front but those cars are pure track drift whores. Also, rolling your fenders doesn't change the look of your car at all. I did it with a hammer on a hot day. Just bash that lip flat and enjoy having 10mm more clearance. Preferably, you don't want to run as much camber in the back as the front so pulling would be a plus if you ran such a low offset.

As for the 15x7 +32, flushness will depend on how much camber you are running. Even on stock camber they will be sunken in so don't be expecting flushness if you get them. http://toy4two.home.mindspring.com/offset.html Use this website and do all your measurements on your own. Find pics of people's cars and find out their alignment and wheel specs. This will help you out a lot.

[b18c1ek]

Thanks Flybert... gonna consider rolling the fender lip then... does anyone have a pic of a 15x7.5 (-5 offset) wheel on a stock bodied S13?

[TheSnail]

Manaray Sport mesh
17x8.5 in front
17x9.5 in back

offset of 33+, with a 3.5 inch lip

They will arrive thursday, cant wait.

[S14DriftR]

these are 15x7-3, your definatly going to need pulled fenders to fit in rear, should be fine in the front with rolled fenders and some camber.
http://www.imagestation.com/picture/sraid121/p6c9a630fb18adae626712fbca5110375/f84f4b62.jpg http://www.imagestation.com/picture/sraid121/p462e4e774c5293fdbe58d07a2898a301/f84f4b5f.jpg

[b18c1ek]

excellent pic S14DriftR... do you have a pic of 15x7 with +32 or similar? also what size tires were u running in the pic? thats a nasty set up! :bigok:

[S14DriftR]

those tires were 205/55/15 in the rear, was using 195/55/15's front. no pics of 15x7+32, closest i have to that is 16x7.5+22 and there is a pic at the top of this page.

[TheTimanator]

Manaray Sport mesh
17x8.5 in front
17x9.5 in back

offset of 33+, with a 3.5 inch lip

They will arrive thursday, cant wait.
takara garage? how was dealing with them?
they're a local company and like to get a few things through them...

[kcolyer27]

18x9 in the rear 18x8.5 in the front

http://server6.uploadit.org/files/skribbble-240s.jpg

[TheTimanator]

18x9 in the rear 18x8.5 in the front
must include offset and tire size!!! otherwise this thread is useless.. :wiggle:
and whether you rolled/pulled fenders, clears Z brakes and coilovers would be nice too :)

[brianglawson]

^^^^^ damn skippy, but the wheels are the hotness:)

[KiDyNomiTe]

14x6 +156 enkei mesh
15x7 +2 Riken Mesh
15x7.5 +7 SSR Formula Mesh

All are pictured in here. Only 1 enkei in the pic, and only 2 rikens in the pic.
http://img78.photobucket.com/albums/v293/kidynomite/4.jpg

[AceInHole]

Front:
17x8 +11 with 225/45/R17
Rear:
17x10.5 +27 with 315/35/R17
http://www.engr.uconn.edu/~corrales/carsIM/wheeltest/IMG_8265.JPG

Front:
17x10.5 +0 with 315/35/R17 (any more offset hits coilover)
http://www.engr.uconn.edu/~corrales/carsIM/wheeltest/IMG_8274.JPG

[TheSnail]

takara garage? how was dealing with them?
they're a local company and like to get a few things through them...


They were not that bad to deal with so far. The only thing I heard about them, is if you order something it will take forever to arrive, but they sent me the tracking # already and it should be here in 3 days, so I will see. I hope they are half decent shape since I paided the 963 for the used rims. Im dont car about scratches, but I would hate to repair a bent rim. I will make a post when they arrive.
-Thanks, Snail

[GonadSX]

16x7 +35, 16x8 +38, 4x100 bolt pattern.
The wheels come with a 10mm adapter/spacer to convert 4x100 to 4x114.3 (shown in last pic)

Click pics to enlarge:
http://240sx.cubicdesign.com/images/2003/dec1/allwheels_t.jpg (http://240sx.cubicdesign.com/images/2003/dec1/allwheels.jpg) http://240sx.cubicdesign.com/images/2003/dec1/wheelcloseup_t.jpg (http://240sx.cubicdesign.com/images/2003/dec1/wheelcloseup.jpg) http://240sx.cubicdesign.com/images/2004/mar19/hub1_t.jpg (http://240sx.cubicdesign.com/images/2004/mar19/hub1.jpg)

More pics and stuff on my site:
http://240sx.cubicdesign.com/

[RiceEata]

Roja formula 5's
F: 18x8 +23 225/40/18 = Apex N1 pro camber plates maxed out as much as it can go, need to roll fenders and 215/40 would be better.

R: 18x9 +23 225/40/18 = too much camber, need to roll and maybe pull fenders

Pix are with out rolled fenders....

http://img78.photobucket.com/albums/v335/oO0oBo0Oo/king_kamber.jpg
http://img78.photobucket.com/albums/v335/oO0oBo0Oo/graveyard_camber.jpg
http://img78.photobucket.com/albums/v335/oO0oBo0Oo/king_kam_2_front_view.jpg

[S14DriftR]

holy crap, that will look awesome once you roll and pull the fenders a little in back, fronts look like they fit perfect, that rear camber is insane though.

[s13irdie2]

will you need to roll the fenders with the ssr mesh or enkei mesh if im gonna run coilovers? also will they clear the z brakes with 20 mm spacers? thanks

[TheTimanator]

Yeah, this thread is back...and I'm over a 1,000 posts! :w00t:

will you need to roll the fenders with the ssr mesh or enkei mesh if im gonna run coilovers? depends on the offset, width of the rim, tires size and camber that your running. Having wheels that clear coilovers does not mean that you will have to roll your. Once again it will depend on what I said above.

about clearing Z brakes...I have no idea. If you want to upgrade your brakes and get mesh wheels without running crazy spacers you could get Q45 brakes.

[Zemus]

http://figz.com/~deters/photos/resized//20040717-20040717%20134.jpg

15x8.5 -27 offset :-D Rear, and hopfully in front soon

[brianglawson]

hahaha that is hot zemus

[RBS14]

I'm running 17x9 +15 fn's on my s14, front and rear. 225/45's.

http://www.imagestation.com/picture/sraid99/p5f73628ec6cc5c9eb20c942702de2ffd/f9ef54dd.jpg

tiiiiiiiiny brakes anyone?

http://www.imagestation.com/picture/sraid99/p5dd706104c29fb42b8910fdf5d60e509/f9ef54ee.jpg

http://www.imagestation.com/picture/sraid99/p016f5a026077a138411fa654d33235fe/f9ef54f4.jpg

and i got a pair of these coming in a couple days in 16x8 -6:
(minus the center caps of course)

http://static.summitracing.com/global/images/prod/large/usw-84-5712.jpg

with some 205/50's on em, they'll be fun for the rears at events and touge.

[Zemus]

Nice but -6.. sooo weak.. hahah. I need some nice wheels now

[s14srpilot]

Here's mine:

http://www.we-todd-did-racing.com/wetoddimage.wtdr/wNDg1NDY4NnM0MTNkZmQzMXk1NDE%3D.jpg

http://www.we-todd-did-racing.com/wetoddimage.wtdr/wNDQxNzIyNnM0MTNkZmQzMXk1NDE%3D.jpg

17x8 and 18x9 +25 all around

[Zemus]

space those things, atleast 15mm. :-D

[S13FREEAAK]

Zemus: What size tire do you run on your 15x8.5s?

[Buffalo Daughter]

Im running on Riken mesh 16x7, -15 in the front on es100's and Super Advan Gen 1's in the rear 17x9 + 42, weird ass offset but it came with Bridgestone Re-01's with 99% meat.
http://memimage.cardomain.com/member_images/7/web/583000-583999/583848_19_full.jpg
http://memimage.cardomain.com/member_images/7/web/583000-583999/583848_18_full.jpg
http://memimage.cardomain.com/member_images/7/web/583000-583999/583848_20_full.jpg http://memimage.cardomain.com/member_images/7/web/583000-583999/583848_21_full.jpg

[phrozen]

dont make andrew bust out his -34offset wheels "thats mexican" hahaah

[titan240sx]

the ones I have now are Vielside Andrew F's

18x11 rear -17 offset and 295/30 tires
18x7 front +35 offset and 215/35 tires


my new rims that will be here shortly are ( Andrew racing V )

19x13 rear -30 offset and 335/25 tires
19x10 front -6 offset and 265/30 tires

new wide body s15 conversion is going up front ( blister s15 )

[brianglawson]

^^^^ oh plz let me see the andrew racings!!! pics pics pics

[Zemus]

18x7???? and 18x11 in back... wtf.. New sizes sound better.

[TheTimanator]

the ones I have now are Vielside Andrew F's

18x11 rear -17 offset and 295/30 tires
18x7 front +35 offset and 215/35 tires


my new rims that will be here shortly are ( Andrew racing V )

19x13 rear -30 offset and 335/25 tires
19x10 front -6 offset and 265/30 tires

new wide body s15 conversion is going up front ( blister s15 )
those sizes sound like that ebay 240 with the Jacquemond Design kit and supra tails. I think it had 300zx headlights too but I can't remember :barf: The wheels still looked super sunk... The front would look sunken even with stock fenders....

Wait a minute...you bought that car didn't you!!!

[s14srpilot]

Im running on Riken mesh 16x7, -15 in the front on es100's and Super Advan Gen 1's in the rear 17x9 + 42, weird ass offset but it came with Bridgestone Re-01's with 99% meat.


ES 100's are awesome. I just got a set and they stick like glue and run soooo smooth.

[Steeles]

Front:
17x8 +11 with 225/45/R17
Rear:
17x10.5 +27 with 315/35/R17
http://www.engr.uconn.edu/~corrales/carsIM/wheeltest/IMG_8265.JPG

Front:
17x10.5 +0 with 315/35/R17 (any more offset hits coilover)
http://www.engr.uconn.edu/~corrales/carsIM/wheeltest/IMG_8274.JPG

holy crap mang! lol. I was thinking about those 5zigen fno1rc in 17x10 +12 all around but sheesh! lol. thats crazy ace!

[Mr. Badlose]

http://guernsey.globat.com/~mountainracer.com/pics/taifun/7-15-04%20005.jpg
Don't mind the hand. Typhoons 17x8 +32 (or was it +35?)
New tires coming soon. Very soon before they blow up on me! (right JAAE86? heh) I don't think 245 Azenis will fit...so 225 it will be. The 225/45/17 a046s (evo tire) up front have about a 10mm amount of clearence between the strut's coil-mount. Yes, I'm guess-timating this measurement.

Edit: I'm hoping some z32 brakes on Z-tuner brackets will fit well up front.

p.s. : F**k you, Eibach Prokit. Ok I'm sorry Eibach, you ride well...but when you claim you'll lower my car you shouldn't lie. ^_^

[PSI240SX]

just got my new feet on! SSR SP1R 16x8.5F and 16x9R with a sick lip...
http://www.planb-attack.com/jay/GeneralLee/Proffessor.jpg
http://www.planb-attack.com/jay/GeneralLee/Proffessor2.jpg
http://www.planb-attack.com/jay/GeneralLee/Proffessor3.jpg
Little flared fender action when I got it painted too. Hehe.

[brianglawson]

nice jay:) looks super great

[Zemus]

wow, thats the offset on those, they look super nice!

[S13FREEAAK]

Zemus: What size tire do you run on your 15x8.5? I might try and fit some 15x8 0 offset with 225/50/15s or something like that. Do you think I could get away with just rolling the fenders and some serious camber(-3.5,-4 degrees)?

Joe

[RBS14]

Nice but -6.. sooo weak.. hahah. I need some nice wheels now


My whole car is weak!!! hahah

I'm rocking the reverse of that guy's sig that says "track wheels not truck wheels"

lets hear it for truck wheels! :w00t:

[upSLIDEdown]

Hey PSI...what sizes/offsets are they...they look great!!

Bryan

[the240sxer95]

ACE, you planning on some fenders flairs? wide fenders? haha whats going on!!

would a 17x10 +12 fit in the front of a s14??

[titan240sx]

That is my car I never got it sold in time.



those sizes sound like that ebay 240 with the Jacquemond Design kit and supra tails. I think it had 300zx headlights too but I can't remember :barf: The wheels still looked super sunk... The front would look sunken even with stock fenders....

Wait a minute...you bought that car didn't you!!!

[Zemus]

Zemus: What size tire do you run on your 15x8.5? I might try and fit some 15x8 0 offset with 225/50/15s or something like that. Do you think I could get away with just rolling the fenders and some serious camber(-3.5,-4 degrees)?

Joe


I am running 215/50/15s and 205/55/15s on the back of those wheels, and truthfuly with a nice setup I would take the 215/50/15s on back, felt GREAT awesome responces, and are just overall awesome. I would run 3 deg on those 15x8 0s. Just my personal pref. also roll those fenders

[S13FREEAAK]

I am running 215/50/15s and 205/55/15s on the back of those wheels, and truthfuly with a nice setup I would take the 215/50/15s on back, felt GREAT awesome responces, and are just overall awesome. I would run 3 deg on those 15x8 0s. Just my personal pref. also roll those fenders

Ok, good thats all I was hoping I would have to do.

Joe

[TheTimanator]

Jay, PM'd you about the meets (this is the guy you met at Dicount Tire). When you said SSR, I was thinking meshies...but wow, looks awesome! I'd like to know the offsets as well....

That is my car I never got it sold in time. :ugh: I could ask a dozen questions as to why you did all that.....but I gotta know, why did you get a larger gas tank? haha

[INeedNewTires]

i have 17x 8 Regamasters with an effective +30 offset. They are forged and weigh 12.7 lbs each, im running Dunlop Fm901's up front with a 215/45 and i got come corvette tires for cheap so im using them out back. not the greatest sizes but they were only 10 bucks a tire with 60% tread left so i couldnt pass em up. they are 225/50's Potenza RE92's.

I LOVE my setup. i have Z32 brakes all around, and am about to buy some SPL coilovers. I know they will clear fine. Im getting the coilovers fitted for S14 for the fronts because i converted to 5 lug with S14 stuff including LCA's, and im getting the rears fitted with Z32 lower mounts so i can use the aluminum uprights from the Z32 for added unsprung weight savings.

I cant believe the difference the lightweight wheels made. I can get the tires spinning easier now that before when i had crappy ass tires on a 15in wheel. It really makes no logical sense; the fact that i have wider and much better tires now but can break them loose easier?? Weird but true. i have shitty open diff and stock clutch too, which i hate. I absolutely love the wheels though, they dont look all flashy so they wont get stolen but they are really flush with the fender. the 225's are fitted perfect on the 8in wheel while the 215's have a little stretch, it looks really good.

I dont have alignment specs yet as i am finishing putting all this stuff on by friday, then ill know my exact specs but im thinking of putting -2.2 or so front camber and -1.2 rear. caster will be set with my adj TC rods, and toe i will try and get as straight as possible for now, I need to read more on toe settings before i mess with that.

[PSI240SX]

They are 16x8.5F with +13 and 16x9R with +19 I believe. I always get foggy about that though, I may have the offsets backwards.

[Zemus]

Wow those are really nice offsets.. Did you buy those new? or used? If so point me in the right website direction so I can waste my money away :-D.

[Steeles]

the general's looking kinda sexy there bro.....

[OptionZero]

Is anyone running 16x8 on an s14? I figure pretty much as low offset as possible would work easily, but whats a good tire size realistically? I don't need super contact patch on a stock KA, i just want some super light wheels, increase tire size w/o having to go for more expensive 17in tires

Volk makes the TE37 in 16x8.5 actually...with like +15 i think...can i can slap on what..235/40/16?!

[PSI240SX]

I got em new but from a private owner.

[Buffalo Daughter]

Is anyone running 16x8 on an s14? I figure pretty much as low offset as possible would work easily, but whats a good tire size realistically? I don't need super contact patch on a stock KA, i just want some super light wheels, increase tire size w/o having to go for more expensive 17in tires

Volk makes the TE37 in 16x8.5 actually...with like +15 i think...can i can slap on what..235/40/16?!

i think the 235 40 would fit the back but if your running that tire size in the front its going to hit the shock unless you have dampers or coilovers. But 16x8.5 is niiiice. i currently run on 16x7 -15 in the front with 205/55/16 tires and then look flush. I think with the 16x8.5 it'll stick out a lil but it'll look sick.
If i was going to run 16x8.5 i'd prolly go with 215/40/ with the 8.5's. Or if you don't want the stretch go with 215/45. I dont know just my thoughts.

[Buffalo Daughter]

http://memimage.cardomain.com/member_images/7/web/583000-583999/583848_20_full.jpg
You can imagine how the front would be another inch and some cents.

[SoCalS14]

Running Work Termist 17X8 +20 Front, 17X9 +27 rear, on a S14...Awesome fitment.

[Zen S14]

Kakimoto N-GTs 17x8 17x9 +37 all around 235 in front, 255 in back. clears the WS coilovers but not the 300zx brakes

Regamaster 17x8 +35 all around with 235 in front, 245 in the back. Clears everything so far. Haven't tried the 300zx brakes yet but looks like the spoke design will clear fine.

[tastyratz]

I started making a database at work and i got like the first couple pages but i dont have time to continue doing this anymore so ill post what i have and maybe someone else can take over and make a nice tidy list. i put as much information as put by others and left some blank so if thats you post or give to whoever would want to continue this to update any information. however, here it is so far:

car: s13
Wheel: 280zx turbo swasticas
Wheelsize: 15x6 +12
Tire size:
fitment modifications:
Coilovers: yes
Brakes: no
****************************
car: s13
Wheel: r33 gtr rims
Wheelsize: 17x9 +30
Tire size: F: 215/40/17 R:215/45/17
fitment modifications: rolled/ light pull
Coilovers: only with 5mm spacer
Brakes: yes
****************************
car: s13
Wheel: 5 zigen FN01RC
Wheelsize: 17x9 +15
Tire size: F: 215/40/17 R: 225/45/17
fitment modifications: rolled / light pull
Coilovers: yes
Brakes: yes
****************************
car: s13
Wheel: Borbet Type-T
Wheelsize: 16x7.5 +35
Tire size: 225/50/16
fitment modifications: none
Coilovers: stock shocks clear by 1 cm
Brakes: should
****************************
car: s13
Wheel: Riken Mesh
Wheelsize: 15x7 +0
Tire size:
fitment modifications:
Coilovers: yes
Brakes: no
****************************
car: s13
Wheel:
Wheelsize: 15x7 -2
Tire size:
fitment modifications:
Coilovers: yes
Brakes: no
****************************
car: s13
Wheel: FN01RC
Wheelsize: 17x8 +35
Tire size: 225/45/17
fitment modifications:
Coilovers:
Brakes:
****************************
car: s13
Wheel:
Wheelsize: 16x7 +0
Tire size: F: 205/45/16 R: 215/45/16
fitment modifications:
Coilovers: yes
Brakes: no because of mesh
****************************
car: s13
Wheel: kosei k1
Wheelsize: 15x7 +27
Tire size: 205/55/15
fitment modifications: no
Coilovers: yes
Brakes: yes
****************************
car: s13
Wheel:
Wheelsize: 15x7.5 +17
Tire size: 205/55/15
fitment modifications:
Coilovers: yes
Brakes: w 30 mm spacer
****************************
car: s13
Wheel: ssr longchamp xr-4 REAR ONLY
Wheelsize: 15x7.5 +5
Tire size: 205/55/15
fitment modifications:
Coilovers: yes
Brakes: no
****************************
car: s13
Wheel: blitz type 03
Wheelsize: 17x8 +28
Tire size: 215/45/17
fitment modifications:
Coilovers: no
Brakes: no
20mm spacer was also used in this app
****************************
car: s13
Wheel: *Front only
Wheelsize: 16x8 -15
Tire size: 205/55/16
fitment modifications: demon camber
Coilovers: yes
Brakes: yes
****************************
car: s13
Wheel: fno1rc
Wheelsize: 17x9 +15
Tire size: 215/45/17
fitment modifications:
Coilovers: yes
Brakes: yes
Rubs fenders when really low
****************************
car: s13
Wheel: nismo lm-gt2
Wheelsize: F: 17x8 +35 R: 17x9 +38
Tire size: 215/45/17
fitment modifications:
Coilovers: (finger fits between tire/spring. not with bigger tire on front) rear: yes
Brakes: yes
****************************
car: s13
Wheel: Riken mesh
Wheelsize: 15x7 +15
Tire size:
fitment modifications:
Coilovers:
Brakes:
****************************
car: s13
Wheel: bbs rs
Wheelsize: F: 17x8 +35 R:17x9 +35
Tire size: F: 235/45/17 R: 255/40/17
fitment modifications: (rear needs camber or roll to fit?)
Coilovers: F: yes with 5mm spacer R: yes
Brakes: yes
****************************
car: s13
Wheel: Volk racing ce28n
Wheelsize: F: 17x7.5 +25 R:17x8.5 +30
Tire size: F: 215/45/17 R: 245/40/17
fitment modifications:
Coilovers: yes
Brakes: yes
****************************
car: s13
Wheel:
Wheelsize: 17x9 +15
Tire size:
fitment modifications: widebody fenders
Coilovers:
Brakes:
****************************
car: s13
Wheel: daytons
Wheelsize: 14x6.5 -10
Tire size:
fitment modifications:
Coilovers:
Brakes:
****************************
car: s13
Wheel: Hoshino Impul RS3
Wheelsize: F: 17x8 +30 R: 17x9 +35
Tire size: F: 235/40/r17 R: 265/40/r17
fitment modifications:
Coilovers: w 5mm spacer or 225 tires
Brakes: yes
****************************
car: s13
Wheel:
Wheelsize: 15x7 +5
Tire size: 205/55/15
fitment modifications: mucho camber or roll fenders f+r
Coilovers: yes
Brakes: not even stock in front
****************************
car: s13
Wheel:
Wheelsize: 16x8 +36
Tire size: 205/55/16
fitment modifications:
Coilovers: yes but need 5mm spacer up front
Brakes: yes
****************************
car: s13
Wheel: m2 dt05r
Wheelsize: F: 17x8.5 +25 R: 17x9.5 +30
Tire size: F: 225/45/17 R: 245/45/17
fitment modifications: roll rear fenders/ remove front liner
Coilovers: yes
Brakes: yes
****************************
car: s13
Wheel: m2 dt-05r
Wheelsize: F: 17x8.5 +25 R: 17x9.5 +30
Tire size: F: 215/45/17 R: 235/40/17
fitment modifications:
Coilovers: yes
Brakes: yes
****************************
car: s13
Wheel:
Wheelsize:
Tire size:
fitment modifications:
Coilovers:
Brakes:
****************************

[tastyratz]

S14
Fn01r-c 5zigen's 17*8 +35
*****************
****************************
car: s14
Wheel: work wheels
Wheelsize: F: 18x8.5 +32 R: 18x10 +40
Tire size: F: 235/40/18 R: 265/35/18
fitment modifications:
Coilovers: Clears agx w rsr springs
Brakes:
****************************
car: s14
Wheel: Stern Face II Beast
Wheelsize: F: 18x8.5 R: 18x9.5
Tire size:
fitment modifications:
Coilovers:
Brakes:
****************************
car: s14
Wheel: Volk Gramlight 57s
Wheelsize: 17x9.5 +22
Tire size:
fitment modifications: demon camber
Coilovers:
Brakes:
****************************




car: Unspecified
Wheel: Gram Light 57s
Wheelsize: F: 17x8.5 +22 R: 17x9.5 +22
Tire size: 215/40/17 R: 235/40/17
fitment modifications: rolled front / pulled rear
Coilovers:
Brakes:
****************************
car: Unspecified
Wheel: Work s1C
Wheelsize: F: 18x9 +20 R: 18x10 +13
Tire size: F: 225/40/18 R: 245/40/18
fitment modifications: rolled front / pulled rear
Coilovers:
Brakes:
****************************
car: Unspecified
Wheel: F: Buddy Club P1 R: Weds Sport Fins
Wheelsize: F: 16x7.5 +22 R: 16x8 +23
Tire size: F: 225/45/16 R: 245/45/16
fitment modifications: rolled rears
Coilovers: yes
Brakes: yes
****************************
car: Unspecified
Wheel:
Wheelsize:
Tire size:
fitment modifications:
Coilovers:
Brakes:
****************************

[iMAGE976]

Thanks for breakin it down...

[LanceS13]

car: s13
Wheel: Borbet Type-T
Wheelsize: 16x7.5 +35
Tire size: 225/50/16
fitment modifications: none
Coilovers: stock shocks clear by 1 cm
Brakes: should

KTS coilovers clear equally

[holisticbeatz]

17x6 Konig Villans +43 offset

[boost]

car: s13
Wheel: TE37
Wheelsize: 16x7 +25
Tire size: 205/55/16
fitment modifications: no
Coilovers: yes
Brakes: no


http://home.pacbell.net/fselker/jpg/240_c.jpg
http://home.pacbell.net/fselker/jpg/240_d.jpg

[brianglawson]

now i almost garuntee that they clear z brakes boost

[brianglawson]

tasty, that was a good ides, i think i may post this info on a website, oh and now this thread should definately be a sticky!

[Brolewigi]

Where do you guys find these wheels?

[FRpilot]

car: s13
Wheel: TE37
Wheelsize: 16x7 +25
Tire size: 205/55/16
fitment modifications: no
Coilovers: yes
Brakes: no


http://home.pacbell.net/fselker/jpg/240_c.jpg
http://home.pacbell.net/fselker/jpg/240_d.jpg

ur from mountain view? what kind of mods do you have on your car? did you get those te37s used?

[boost]

yeah, i got the te37's used

[shoes59]

S14 Zenki
Track wheels
Volk TE-37's, 16 x 8, 30mm offset, 10mm spacers
Street Wheels
R32 GTR's, 16 x 8, 30mm offset, 10mm spacers

[kuruptR]

S13-Hatch, with Tein HE's. lowest setting up front.
Z32 TT wheels
25mm Spacer from technotoytuning.com
Front 16x7's 40+ 215/50/16
Rear 16x8 30+ 225/50/16

Front and rear fenders pulled and rolled.
If car is really low, will need a lot of pounding to wheel well. 215 tires max up front. Need camber plates to stop rubbing with front fender...(rubbing was very minor.. but was annoying)

Rear needs factory camber...must not get alignment.

Rears are very flush, so are fronts.

next up ---->
17x8 up front
18x10's in the back... using 25mm spacer.
Offsets will be.
17x8 +38
18x10 +32

[tastyratz]

im glad workin that was appreciated :-) i only did the first few pages however and didnt cover a large amount of the wheels im just hoping someone who has the time (with the posts ive read i know someone does lol) would finish my list so we may have a nice neat database to refer to and perhaps be considered zilvia faq or off the main zilvia page.

[brianglawson]

i think we should just get this page stickied!!!!!!!!!!!!!!!!!

[Jeff240sx]

http://jeff.obhost.net/filestorage/wheels/side.JPG
http://jeff.obhost.net/filestorage/wheels/rear.JPG
http://jeff.obhost.net/filestorage/wheels/flush.JPG

I know my shit's dirty. Get over it.

S14
18x8 + 35 front, 245/40/18
18x10 +38 rear, 265/35/18

Clear Z brakes - Yes
Clear Coilovers - Yes
Fitment mods - None
Overall - Fronts could be about 5-10mm further towards the fender. It's not noticable unless you're looking for it, and seeing as I park with cocked tires anyway...
-Jeff

[rancid240]

car: s13 hatch
Wheel: SSR RS8 +26
Wheelsize:16x8
Tire size: 205/55
fitment modifications: none
Coilovers: MsSport shocks, PROF springs
Brakes: stock

[gonzoes14k]

Excal 35+ all around from jerry at lookout drift.

http://img.photobucket.com/albums/v236/gonzoe00/26dd8f99.jpg http://img.photobucket.com/albums/v236/gonzoe00/DSCF0276.jpg

[DRO916]

no more? 10characters

[brianglawson]

ahh good to see my favorite thread:) hey jeff what kind of wheels are those:) and do you wanna sell them hahaha...

[fastbacchris]

ima get a digicam soon ima take pics of mine specs

[Sil Beer S13]

17 x 9 +22 TE37

[Shin_Kudo]

Sorta bringing this thread back.

I've got 17x7 FN10R-C in a crappy offset (+35, I think) (x8s won't clear my front coilovers...) From what I've seen, other rims in similar sizes and offsets clear fine, but, I need to know, can anyone provide solid info as to whether these rims will clear Z brakes? If not, I need to start looking for a cheap pair of rims for the front....

[rancid240]

17 x 9 +22 TE37

moneys...bye bye bank account

[justinhustle]

18x9 +22 and 18x10 +22

[andrave]

WhAT spEc DaWg?
My wHeEls are MaD JDM TyTeness HomIe.
J SpEc oWns you, mAng.

[fastbacchris]

i got rekin mesh 15x7 +17 in the rear and hayashi mesn 15x7 +7 u[ front. il post some pics when i get a digi.

[mrmephistopheles]

http://www.fochkopf.com/images/180sx/xr4z1.jpg
http://www.fochkopf.com/images/180sx/dfq.jpg

SSR Longchamp XR4Z
F: 16x7.5 +6 205/55R16
R: 16x7.5 +6 225/45R16

Clear coilovers, no fender mod needed, Z brake clearance unknown (unlikely)

[mr_240sx]

hi guys, i went through all the pages in this thread and i think i got the right offset that i need for my soon to be new gramlights 57pro for my s13. Just wanted to make sure that these sizes would fit gp sports gr-6 coil-overs and stock fenders that havent been rolled/pulled.
f= 18x8 +23 or +30 i would be running 215/40/18
r= 18x9.5 +30 i would be running either 225 or 235/40/18.

anyone think that i will have any problems?

PS: I have stock brakes right now, but in the future im planning on upgrading the front brakes to a big brake kit probably by endless or rotora.

[ALTRNTV]

17x9 +35
17x8 +25
Ho-zigen FN-01rs

[MELLO*SOS]

This is what SSR 16x8 +26mm offset will get you:

http://img.photobucket.com/albums/v180/mello88/DSC04785.jpg
http://img.photobucket.com/albums/v180/mello88/240_sig.jpg

Sorry for the small 2nd pic I can take a better one if someone wants, but I have no suspension on the car so it looks funky :)



edit: for the database someone made above

****************************
car: s13
Wheel: SSR Reverse Mesh
Wheelsize: 16x8 +26mm
Tire size: 225/50/16 (F) 205/55/16 (R)
fitment modifications: none
Coilovers: Yes (so I hear)
Brakes: dunno...
****************************

[ALTRNTV]

Mello, I remember seeing your car at the Nissan Meet, lovin' those wheels!

[Apossiblehybrid]

stock se 7 spoke wheels

[TheSnail]

Manaray Mesh, 17x8.5 33+/17x9.5 33+ , 2.5"lip/3.5"lip , 245's/275's

[hotrodv]

At least I can write here!!
18x8.5 +22
18x9 +12 (soon 8)
Gramlight 57pro gold!

[i-love-my-s14]

DT-05R's on a s14
17x8.5 +25
17x9.5 +30

http://www.imagestation.com/picture/sraid152/pc8339e790cc808fec5cf08836115773f/f5b28d97.jpg

[Ian]

BBS RK 17x8 +39 w/ big spacers

+9 up front +14 out back

225/45 front 245/45 back

rear fenders needed to be rolled and i'm not even very low yet, after coilovers i'm suspecting i'm gonna need some camber to keep them inside the fender

[Yuri]

Set 1
F: 16x7 +35 Kei Office Modex Modia KS-05R 205/55-16 Yokohama ES100
R: 16x8 +35 Kei Office Modex Modia KS-05R 225/50-16 Dunlop FM-901
No mods to fenders
Clears coils
Don't know about brakes
rubs at full lock with tein tie rod ends
Set 2
F: 17x7 +20 Enkei G-square Trentino 215/45-17 Yokohama AVS-sport
R: 17x7 +20 Enkei G-square Trentino 225/45-17 Falken Azenis sport
No mods to fenders
Clears coils
Clears brakes without a doubt
clears at full lock

[SilviaDriver]

18x9 +26
18x10.5 +27

but will be +16F and -3R

[KOUKI KA-T]

At the moment... stock S14 SE wheels
16x6.5 + 15 front, 16x6.5 +10 rear :ughd:
yay spacers

[G_Fish240]

14x7 +10 Enkei 92 mesh.......... on an ae86

[p11driver]

just finished my 5 lug, so got the advans on.

17x9 +22 all 4
235/45 f
245/40 r
http://avnonstudios.com/side.jpg

[Dousan_PG]

Desmond Regamaster
17x9 +18
17x10 +20

Work CR Kai
18x9.5 +12
on order: 17x9 +17

S14 stock fenders, no pull..yet..dont want to.

werd.

[Chernobyl]

16x9 +15 all around. On Z32/FC, depending on which car wants the wheels.

[s-x addict]

figured I'd revive this thread from the dead...its an oldie but goodie
Gramlight 57Pro
18x8 +20 225/40/18
18x9 +27 255/35/18
couldn't be any happier, no rubbing, no spacers, no pulling fenders.
sorry for the big pics
http://i2.photobucket.com/albums/y41/gursaek/P2230001.jpg
http://i2.photobucket.com/albums/y41/gursaek/P2230002.jpg

[slownslurious]

15x6.5J +33
can't top that nukka

[IGSDann]

Kosei Infest VSS
16 x 7 +20

[rabid_monkey]

pics posted in that 18" S13 wheel thread.

specs are: ADR Sterling 18x9.5"+25 all around with 13mm spacers all around
215/40-18 front 235/40-18 rear

still rub a tad on the inner fender, but basically to get them to work good i had to:

- pull and roll the front and rear fenders
- bang flat all pinch welds in the front fenders
- relocate the harness
- relocate the brake line brackets
- was still rubbing at full lock drifting, so i notched the fenders, plan on going another inch lower anways, i want the rear fender to be about level with the top of the wheel lip to give an idea
- also, the wheel hits the frame or tension rod at full lock because of the Tein tie rods so expect that too

[vik]

supa ghey 17x9 -3 and 18x9-13 lot a camber front and rear fucked up fender pull
http://www.pbase.com/wongfeihung/image/47083091.jpg

[IES13]

Gramlight 57 Pro

Front: 17x8 w/ 215/45/17
Rear: 17x9 w/ 235/40/17

Lowered with Tanabe S-S Coilvers, no rollin of fender....I need to post pics...=P

[RSP13-Sideways]

I'll post pics in a bit. But I'm running some GX-01 Grenade wheels on my 89' Fastback.

Running 17x9 +15 5x114.3 up front and 17x9 +15 5x114.3 in the rear. Front I needed major camber and the rear definitely needs to be pulled!

[omgosh]

Not that anyone will ever want to know this, lol, but...

15x8 unknown meshies
0 offset (pretty sure)
235/55/15

the above is from memory, but Im pretty sure its right...the pictures are from my s14 with AGXs/Sportlines. Stock body, intact fender liners, no rub.

They also fit pretty well on my s13 I THINK, gonna have to try them out with some 205s.

http://img.photobucket.com/albums/v337/omgosh/240sx/4wheels012.jpg

http://img.photobucket.com/albums/v337/omgosh/240sx/exhaust015.jpg

[rancid240]

whitewalls IN!!!1

[RSP13-Sideways]

Whitewalls in +2

[kaje36]

Advan Sa3r's 17x8 +35 front 8mm spacer 17x9 +38 rear 12 mm spacer.
235/45 front 255/45 rear
http://home.comcast.net/~kaje36/pics/DSCF0389.JPG

http://home.comcast.net/~kaje36/pics/DSCF0390.JPG

[drift into a curb]

That's Raised White Lettering. White walls are the tires with a white stripe that goes around the circumference.

[chmercer]

18x10 -7 18x12 -20

http://img396.imageshack.us/img396/669/small1lv.jpg

[omgosh]

haha, raised white lettering in +3...

didnt have them on the car long enough to make me want to get them turned around. white was out when i bought the wheels.

[Irukandji]

Riken Mesh

15x7 +17 offset

no way in hell it clears z brakes... barely clears stock

clears coilovers

http://tinypic.com/aym492.jpg

[vvtisupra]

car: s13
Wheel: Advan Oni
Wheelsize: 16X8 +12 front
16X8 -1 rear
Tire size: 205/55/16 Bridgestone Potenza RE01
fitment modifications: Pull fender a tad probably didn;t even need it since im running a lot of negative camber -3 mm spacer all around just cuz i had them laying around
Coilovers: yes
Brakes: have not tried but most likely no on all 300zx brakes and maybe on Q45 sliding calipers

[YucA]

skimmed through and didnt see this posted...

350z stockies...
17x7.5 +30
17x8 +33
http://bellsouthpwp.net/y/u/yuca305/240/hc2.jpg

[tzu]

I was wondering how will these fit on an s13 17x9 15 offset front, 17x10 25 offset rear
im planning on going with these with 205 tires

[chmercer]

yes it fits. have fun with that 205 on a 10j.

[tzu]

yes it fits. have fun with that 205 on a 10j.

wohoo man i was looking crazy for flushness
i was told that you can only fit 9 in the rear but guess they were wrong
as soon as i get them ill put the pics so you ppl give ur impression on them

[chmercer]

you need to roll/pull the fenders / not run a pussy alignment, can run far bigger depending on car setup.

[upSLIDEdown]

wohoo man i was looking crazy for flushness
i was told that you can only fit 9 in the rear but guess they were wrong
as soon as i get them ill put the pics so you ppl give ur impression on them

When he said good luck, he was being sarcastic. You will have a hard time fitting the 205 on a 10j wheel. I would at least go with a 225 or 235. It will still be stretched and plenty flush, but a lot easier to mount. Regardless, you will have to roll and most likely pull the fenders as posted above. A good friend of mine runs 225/40 and 245/40 on his 18x9/10 combo. Looks great.

And just to stay on topic, I will be running 18x8.5 +25 and 18x9.5 +25 sometime in the next few weeks I hope. (S13)

[RiceEata]

I was wondering how will these fit on an s13 17x9 15 offset front, 17x10 25 offset rear
im planning on going with these with 205 tires

yeah, don't run a 205, this is 10" +37 with 235/40
http://img.photobucket.com/albums/v335/oO0oBo0Oo/DSCF0018.jpg
http://img.photobucket.com/albums/v335/oO0oBo0Oo/DSCF0004.jpg

[scir16v]

17x8 +25
17x9 +35
fn's
coils:yes
z32:yes


Fronts could come out about 5-10 mm
rears look pretty good.

I'll post pics soon.

[nismosil40zx]

I have stock 300zx rims with Toyo Proxys 225/50/16 on my 240sx 1990 coupe. They clears 300zx brakes of course. But dont clear Kyp struts with Tein springs. You need and 1/4 spacer.

[linkwpc]

http://www.geocities.com/squaresoft_99/bigwheel240sx1.jpg
Saleen Mustang Wheels

18x9 +24 all the way around

Falkens ST115
225/40/ZR18 in front
255/35/ZR18 in back
z32 brakes:yes


Great wheels, but very heavy!

[s14slide]

s13, onevia w/ 9Jx17 +27. Kosei K1's. Right now rollin w. 225/45 or 35 Azenis st115 up front. Out back I'm rollin w/ 245/45/17 Advan Neovas. I don't normally run 'em that big out back, but they were free.

[KwKouki]

Konig Rewinds 15x7 +0
Falken Zieks 195/60/15

http://img209.imageshack.us/img209/4134/fakeasspanas9qx.jpg

http://img209.imageshack.us/img209/5719/meh6fd.jpg

[Yuri]

VIP wheels:

Rays Victrix Kruezers
4 and 5-lug
F:17x8+19
R:17x9+36
I need bigger spacers.
clear coilovers, don't rub at full lock with tein tie rod ends, and look like they would clear Z32 brakes.
http://i22.photobucket.com/albums/b321/Yurikaze/me1.jpg

[brianglawson]

nice sil-80, cant believe this thread is still alive:)

[KOUKI KA-T]

Some freshly polished Impul R5's. 17x9 +20
(Almost done all 4.. never polishing wheels again)

http://img.photobucket.com/albums/v378/srhamlin/Dsc00864.jpg
http://img.photobucket.com/albums/v378/srhamlin/Dsc00865.jpg

[KiDyNomiTe]

Now I have more wheels
2 x 15x7.5 +7 SSR Mesh
2 x 15x7.5 -5 SSR Mesh
4 x 15x7 +2 Riken Mesh
6 x 16x8 -10 Starion Wheels
2 x 17x9.5 +12 Gram Light 57S
2 x 18.9.5 +12 Gram Light 57S
2 x 18x10 +18 Work Equip

8 leaving soon, 2 coming soon. I will get pics once its purty

[kuruptR]

S13-Hatch, with Tein HE's. lowest setting up front.
Z32 TT wheels
25mm Spacer from technotoytuning.com
Front 16x7's 40+ 215/50/16
Rear 16x8 30+ 225/50/16

Front and rear fenders pulled and rolled.
If car is really low, will need a lot of pounding to wheel well. 215 tires max up front. Need camber plates to stop rubbing with front fender...(rubbing was very minor.. but was annoying)

Rear needs factory camber...must not get alignment.

Rears are very flush, so are fronts.

next up ---->
17x8 up front
18x10's in the back... using 25mm spacer.
Offsets will be.
17x8 +38
18x10 +32

I think this was posted late 2004
I ended up getting
17x9 + 15
18x10 +25
The +15 was shit and so is the 9inch width it looks cool but who gives a fuck about flushness. When you want your car on the ground heha and kinda function with out eating your fender when you reverse. It rubbed the coilover so i had to add 10mm spacer so i can get some savage negative camber in there to tuck the wheel in the fender..
anyways it should have been a 17x9 + 5 for any one who wants a flush wheel on stock fenders. (requires full negative camber. Factory and Pillowball) To be low you will need a 215/40 or 45R17. Im going with a 215/40 to get it on the ground, this needs relocation of wiring harness on driver side!

18x10 pretty good size(235/45/18, easy to smoke, nice ride) Flush with no fender Pull... pulling fenders is a gay trend and its getting out of hand.
Being the ricer i was i pulled my fenders in 2003 to fit my gay 300zx tt wheels with 25mm spacers.

18x10+25 will rub inner fender with stock camber pulled straightest possible.
I recommend an 18x10+15 for flushness and minor rolled and pulled fender.

copy and paste the link to get pics of what my car looks like with 6mm spacers all round

[RBS14]

http://img.photobucket.com/albums/v607/ScooterS14/wheels/DSCN0440.jpg

17x9 +0
Stock S14 fenders (rolled)
-3 camber

[theicecreamdan]

tire size panda man?

[Rennen]

14x6 +10 Datsun 280Z wheels
195/70/14 dirt/gravel tires
clears stock brakes ;)
hub is larger than 240SX hubs, so they are lugcentric

http://www.imagestation.com/picture/sraid187/p2e9a3058c2bc081eb16130a118963d3e/f23070de.jpg

http://www.imagestation.com/picture/sraid175/pcd9c524019caba6b033fdd41858fb4f3/f37c1e7d.jpg

http://photography.tlmotorsports.net/PICT2991.JPG

Also picked up a pair of 14x7 +8 Celica Supra wheels
they clear stock brakes/suspension
hub size was too small and needed to be enlarged on a lathe

[crioten]

http://photography.tlmotorsports.net/PICT2991.JPG


i remember that front end :)

[RBS14]

tire is 225/45. With my power right now, I LOVE 225/45/17's.

I love it when I put 18's on the rear cause the lip of the wheel is at the fender, and I tuck driving around. SOOOO hot. I need some 18's for the rear. 17/18 stagger is the sex.

[raz0rbladez909]

17x8 +31 f 17x9+44 with five millimeter spacer in rear discontinued volk racing progressiv 2's will clear stock coilovers and brakes may clear z brakes cuz theyres a lil bit of clearance left but ive been told that with those offsets they will not clear coilovers

[raz0rbladez909]

and heres another pic

[squalsme]

I was wondering how will these fit on an s13 17x9 15 offset front, 17x10 25 offset rear
im planning on going with these with 205 tires

im running similar wheel sizes, so you can judge from that.

SSR sp1

17x9 +16 and 17x10 +24
225-45-17 and 245-45-17

http://img.photobucket.com/albums/v414/squalsme/IMG_4542.jpg
http://img.photobucket.com/albums/v414/squalsme/IMG_4400.jpg
http://img.photobucket.com/albums/v414/squalsme/devilrims.jpg
http://img.photobucket.com/albums/v414/squalsme/IMG_1543.jpg

My car has been lowered an inch in the fron, and a inch and a half since then.(had to relocate harness.)

my recommendation, or what i wouls do better if i couls re do it:
get 215/40/17 front and 235/40/17 rear
for really nice stretch.
get maybe a 5mm spacer in the rear to push it out as far as possible to match perfect with the pull, and lower about an inch more. that would be the SHIT!!DO IT

[slownslurious]

5zigen 5zr 17x7.5 +35

taken from ghetto junkyard integra with extreme camber.

[spookykid]

So, i just goodled a search for wheel offset pictures, and i came across this site, and i joined these forums just b/c of this topic. Just wanted to say thanks to everyone who posted. You all answered a bunch of my questions, and helped to avoid me making yet another "what offset..." thread. Thanks!!!

[240_sx_guy]

How would 17x9 +20 with 215/45-17 up front and 17x10 +30 with 235/40-17 for the rear look?

This would be with rolled fenders (Don't wanna pull if I don't have to so I'm looking at +30 instead of +25 in the rear, unless I can get away with 17x10+25 with no pull) and around -2.5 deg camber all around?

[cgguy]

350Z Rays 18x8 +30, 18x8.5+33

http://img.photobucket.com/albums/v709/cgguy/side.jpg
http://img.photobucket.com/albums/v709/cgguy/rear.jpg

[mr_240sx]

How would 17x9 +20 with 215/45-17 up front and 17x10 +30 with 235/40-17 for the rear look?

This would be with rolled fenders (Don't wanna pull if I don't have to so I'm looking at +30 instead of +25 in the rear, unless I can get away with 17x10+25 with no pull) and around -2.5 deg camber all around?
im running 18x10+25 in the rear with 245/35/18, im running just a bit of camber but when i come out of steep entrances they tires rub on the fender lip. but with 17's it might clear..... :cool:

[Nan Desu Ka?!]

I dont have them on the car yet, so i will edit after install pics later, but i will be running these here pretty soon

15X8 +0 PRIME (at least thats what the center caps say... i have no idea what the model is though... but damn do they have sexy lips.)
gonna be running some 215/60/15's on Tien Stech/tokico blue's.

they should clear coils easily
z32 breaks is hard to tell though, when they have tires and are on my car, ill be able to tell better.

at the very least im going to need a roll and probably a mild pull in order to prevent any rubbing at full lock. V where u at? :D

on to the pics:
http://i12.photobucket.com/albums/a220/dracco77/Wheels_-_3.jpg
http://i12.photobucket.com/albums/a220/dracco77/Wheels_-_2.jpg
http://i12.photobucket.com/albums/a220/dracco77/Wheels_-_1.jpg

the lip needs a little polish, ill keep the centers unpolished for now cause im probably going to end up blacking out the center spokes. and of cource those center caps are going to be put in my shed never to be seen again until i sell the wheels... if i ever do.