PDA

View Full Version : FMU and BOV hook up for KADE


Jifter
03-18-2012, 02:32 PM
Hey I need some help figuring out where to hook up my fmu and bov vac lines on my KADE. I've removed my EGR last week and had to plug one of the vac lines for the EGR. Would it be alright to hook up my fmu and bov from this blocked off line? Any help would be great.

Jake

4x4le
03-19-2012, 02:40 PM
People are still using fmu's?

RedTopKA-T
03-19-2012, 02:48 PM
Ditch the fmu man ur gunna blow it up with that ..at least get a safc or some form of air/fuel control ..I had an fmu they're garbage,had an safc too theyre OK but still a lil sketchy , now I got nistune and its great...as for the hookup the fmu has a fuel line in and out the in goes to the fuel tank out goes to fuel rail and the vacuum can be hooked up to any nipple on the intake manifold same for the bov vacuum ..trace the egr vacuum tube and see where it goes if it goes back into the intake manifold then yes u can use it ..

di-devol
03-19-2012, 03:50 PM
People are still using fmu's?

Aha, this.

Jifter
03-20-2012, 08:27 AM
thanks Redtop