View Full Version : help? bellhpusing swap sr/ka
vladimir240
03-15-2012, 06:53 PM
I'm doing a swap of the bellhousings going from Sr tranny to the ka. While the transmission, ka was apart it might have popped in gear. It stayed locked in 3rd gear. Messed around a bit and got it to shift ok. Now its all put together and it still gets stock periodically. When it does I giggle the shifter and it popps in gear and shifts alright. And then randomly gets stuck again. Anyone got any suggestions,I'm probably gonna put it in the car and hope the gear oil will help to smooth it out so it won't stick.
Thanks in advance
Vlad
waxball88
03-15-2012, 08:10 PM
Bellhousings swap just fine. Takes some coaxing but doable
vladimir240
03-15-2012, 08:34 PM
yeah i got that thanks. the issue is with the ka tranny put in the sr bellhousing the gears are gettig stuck in third, then with the shifter giggled, and i mean harder then wanking off, it comes loose and shifts fine. is it possible that because there no gear oil its sticking?
im throwing in the car tomorrow regardless and seeing if under load things get themselves together with lubrication. just waiting for the rtv to dry up a bit. and yes i know there is a write up on it on NICO
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.