WTB: LS1 or higher coils for s2 rb25

[EnemyS15]

Shipped to 33612

[roboticnissan]

I picked some up off ebay for 180$ shipped.

Wiring was really simple. Good upgrade

[EnemyS15]

yeah, gonna see if I can snag me a deal before having to go the ebay route.

[GSXRJJordan]

There's a decent amount of difference between all the different coilpack types that GM has offered over the years, in terms of mounting, wiring, and overall performance. When done correctly, they'll give you TONS more spark plug energy which will let you run a larger gap and get a better burn.

Not only do you have to buy the coilpacks (ebay coilpacks are not AC Delco or Delphi, they're Chinese knockoffs which may or may not last) and connectors/pigtails and figure out mounting, but you've got to make spark plug wires from scratch and wire it all into your stock harness. On the RB25 you've got 6 coils wired into one power wire, so I'd double-check your swap wiring as well to make sure you're not trying to power them with a 20ga wire or something.

We sell kits ready to rock for SR's, and can easily put one together for the RB.

[JN1AS44]

I have a set of LS1 Coils With Harness and Mounting Bracket
P.M Me I could Ship Em

[UNITEDMASTER]

SUMMIT RACING.COM OR JEGS. They have OEM & MSD.

[roboticnissan]

I picked up delphi off ebay and it came with the oem ls1 wiring harness. I assume this guy gets them from wrecking yards and slangs them on ebay.

But jordan innovations isnt a bad way to go.

[EnemyS15]

Jordan, shoot me a quote on your set up. I am planning on using chase bay or wiring specialty wiring harness. Plus I was planning on either installing the coils along the coilpack staggered or along the upper edge of the of the fire wall (next to the etched vin number)

let me know what you can do.

[GSXRJJordan]

Jordan, shoot me a quote on your set up. I am planning on using chase bay or wiring specialty wiring harness. Plus I was planning on either installing the coils along the coilpack staggered or along the upper edge of the of the fire wall (next to the etched vin number)

let me know what you can do.

We're trying to figure out the mounting that'll work for the highest number of people... there's not enough room for 6 coils between the wiper motor and the intake manifold I don't believe. We can easily integrate it into one of our Mil-spec harnesses, or add a connector to anyone else's harness where the igniter would attach.

The SR kit is $375 ready to rock with wiring, coilpacks, mount kit, and spark plug wires. The similar RB25 kit will probably be around $500.