Z32 maf+s14 intake

[colombianbryan]

im very curious if the z32 maf will fit on a stock s14 rubber intake. im not looking forward to spending over 300 for a pipe and adapter. is there a way to make it fit and are there adapters for the z32 maf without the full kit. i also already have an apexi air filter and adapter but its for the stock intake.

[Jus Skott]

just wondering why in the hell, are you putting a z32 mass air on a stock intake? what mods do you have that to justify the need.

[colombianbryan]

the rubber pipe is pretty much the same as the aluminum piping. just has the adapter for the z32 to fit thats why im wondering if there is another alternative so i dont blow over 300 for a pipe. and i need this because im not going to tune on a stock maf

[Jus Skott]

ebay a piece of charge piping with the length and bend you need, shouldn't be more than 30.00
go to the junk yard and pull the rubber intake from an old ford or e150 f150, its a little tight but fits over the charge piping and the other end will flare to 3" which will skip over the mass air and intercooler ends. Don't ask me how I know, but this ford rubber intakes that you can cut down to what you need will support up to 30 psi. lol

[OBEEWON]

I wish we had a tech section for technical questions, where things like this could be asked answered and archived.

[colombianbryan]

hahaha alright man im only going to push 14 or 15psi. i just have to get a charge pipe and some couplers than and i should be good.

[Jus Skott]

I wish we had a tech section for technical questions, where things like this could be asked answered and archived.

http://alltheragefaces.com/img/faces/png/happy-i-see-what-you-did-there.png