PDA

View Full Version : LSx S13 builds, turbo LSx vert, drifty stuff


MunsonAuto
03-10-2012, 01:42 PM
What's up everyone!? This is Tanner Munson, I'm a drifter/car builder dude from the east coast. I just had 7 teeth removed (5 wisdom and two canines that were still baby teeth somehow) and have been wicked bored the past few days (bed rest style stuff) so I'm gonna post up a lengthy, picture heavy build thread kinda thing. I'll also use it to post up updates and announcements that are on my website too, kinda like another blog/social media outlet if you will.

I've got a website and fan page and it would really help me out if y'all could take a minute and check out the site and/or "Like" my fan page!
Tanner Munson Drifting (http://www.tannermunsondrifting.com)
Tanner Munson Drifting | Facebook (http://www.facebook.com/tannermunsondrifting)

Anyways, on to the build/pics and stuff, I'll start from the beginning of my drifting days (some of the videos are really bad and I sucked back then, but everyone starts somewhere, check out my more recent stuff for cool driving) and follow up until now. These first two pics are where things sit right now, attention grabbers to keep you interested until the end if you will haha.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/422612_285398861529937_212380202165137_649722_9574 11712_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/407234_10150552792247944_531157943_9045671_6521277 31_n.jpg

29294503


Start of everything!
Picked up this thing back in highschool...looked like this when i got it
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/206986_5939232943_531157943_244914_3464_n.jpg

fixed it up a bit, painted it 2002 Subaru blue black mica, painted stock wheels, blah blah
http://a3.sphotos.ak.fbcdn.net/photos-ak-ash1/v239/207/39/531157943/n531157943_575574_2579.jpg

V8 swapped it for my senior project back before V8 S13's were all over (around spring of 2008)...i wanted a clean fun street car...it was kinda cool then, and the only one in Vermont, which isn't saying much because Vermont is tiny and behind the times but I felt cool. Started off as a 5.3l, ls1 intake manifold, jeep grand cherokee power steering pump because i'm not an idiot, 4l60e automatic because i ran out of money and was 17, etc etc. Did a ton of research on the swap before doing it, made the mounts and exhaust and everything at our shop. Being that it was a big 4l60e and our first potato potato LSx S13 swap our mounts were pretty far forward and the stock hood wouldn't clear the DBW truck throttle body...so we cut a big rectangle out of the hood and put a cowl on it and it's stayed ever since. Lets heat out, lets me not run hood spacers, and it's different.
Looked like this...
http://a4.sphotos.ak.fbcdn.net/photos-ak-snc1/v322/207/39/531157943/n531157943_910962_6161.jpg

Fall of 2008 I picked up a T56 and a LS6 clutch. Put the car away for the winter. Got rear ended spring of 2009, found Russ (Carbomb) on some New England 240/drifting forum, got some parts from Russ, fixed the car in a day...and he talked me into trying drifting. Bought some stance GR+'s, sentra wheels, and some tires.

Did my first "event" before the coilovers, skidpad thinger in canada, made this video and thought i was cool....i wasn't...dont watch the whole vid, it's just embarrasing...
IGmdmIJpGEg (http://www.youtube.com/v/IGmdmIJpGEg)

sentra wheels and coilovers on
http://i266.photobucket.com/albums/ii272/MunsonAuto/DSC05550.jpg

oh yeah, i put some recaro DC2's and nitrous in it too hahah
http://i266.photobucket.com/albums/ii272/MunsonAuto/DSC05554.jpg

Went down to NH and did 2 events on sentra wheels and crap tires at this place called Star Speedway. it was wicked cool, 50 bucks, drive all night, do whatever you want, it was fun.
wkuwRRzP5QM (http://www.youtube.com/v/wkuwRRzP5QM)

Decided to go 5 lug, bought 6 mb battles, z32 brake setup, several maxxis ma-z1's, ichiba hubs and some other stuff. car looked cooler. Oh, I fried the LS6 clutch fast and picked up a Monster stg 3 jobby too.
http://i266.photobucket.com/albums/ii272/MunsonAuto/DSC06118.jpg

Drifted at Star one more time, found out about Clubloose and built my car up over the winter of 2009/2010 in prep for A-group. I dabbled in used cars a bit, made some money, found a killer deal on a 2002 LS1, bought some #243 heads, Texas Speed MS3 cam, PRC Platinum spring kit, pushrods, had the car caged and had the exhaust & drivers side header redone by a badass local rally car guy (Kales Custom - Rally - Auto Customization - Metal Fabrication (http://www.kalescustom.com)), got a seat & harnesses, all that jazz. Braced all my factory arms, my fabricator buddy made a sweet "powerbrace" knockoff, subframe bushings, drift stuff. Cleaned up all the wiring, re-routed stuff, changed around fan setups, fuel line stuff, just went over everything.

Cage came out awesome
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash1/17574_281401107943_531157943_3481623_8219037_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc3/17574_283124637943_531157943_3486033_342728_n.jpg

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash1/17574_283124667943_531157943_3486035_6350531_n.jpg

the exhaust was awesome too
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc4/38221_411818302943_531157943_4724273_5777833_n.jpg

Went back to the skidpad thing in canada real early in 2010 to shakedown the new motor and cage and stuff and to just drive more.
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash1/24208_376268357943_531157943_3818327_2263190_n.jpg

Got on board with Clubloose and drove the 6.5hrs to e-town for spring moves...was one of a few people to pass tech lol...i remember Petty saying something like, "finally, a car that's actually built right", it made me happy. Drove in C group for the first session of the day, then got bumped to B group, made one run on the B course and broke a tie rod. It was the first event of the year and everyone was not prepared and didn't have any spares so I was done for the day early.
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc3/24778_380285552943_531157943_3921305_2663486_n.jpg

http://i266.photobucket.com/albums/ii272/MunsonAuto/24405_1351975792699_1030508070_1061.jpg

<object width="398" height="299"><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://vimeo.com/moogaloop.swf?clip_id=11224326&amp;server=vimeo.com&amp;sh ow_title=0&amp;show_byline=0&amp;show_portrait=0&amp;color=00a def&amp;fullscreen=1&amp;autoplay=0&amp;loop=0" /><embed src="http://vimeo.com/moogaloop.swf?clip_id=11224326&amp;server=vimeo.com&amp;sh ow_title=0&amp;show_byline=0&amp;show_portrait=0&amp;color=00a def&amp;fullscreen=1&amp;autoplay=0&amp;loop=0" type="application/x-shockwave-flash" allowfullscreen="true" allowscriptaccess="always" width="398" height="299"></embed></object>I then went to the first D-UP! drifting event and was progressing really fast and getting the hang of things, everyone kept telling me cool stuff so I kept driving. A buddy with a local motorcycle shop/partout business/wrecked vehicle place kinda sponsored me and helped me with entry fees. Since we have a full auto shop at home and that's what dad and i do for work we used our connections with wholesale tire places to get a good deal on maxxis ma-z1's for the year.

I did a ton of driving in 2010, every clubloose roadcourse event, the Ryan Tuerck/Tony Angelo clinic, XDC NJ, a few NH/driftspot events and some skidpad stuff. Highlights are going to my second clubloose event, east coast bash, and Petty putting me in A group right away and finding me a fire suit for the weekend, shit was wicked rad. Qualified 17th at xdc nj (my first comp scenario), drove a lot, had a ton of fun, and learned how badass drifting is and how awesome everyone the majority of people involved in it are.

Picked up PBM arms for the hatch, got an alignment, more wheels and that was about it...just drove all year and got used to the car and learned how to drive. Everyone made fun of me for my stock steering wheel though :-/

NH event
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash2/34281_400704457943_531157943_4435910_5968940_n.jpg

East coast bash
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash1/32200_398812447943_531157943_4380144_7827466_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash1/32200_398812482943_531157943_4380149_3708966_n.jpg

Miro and I hit a couple times at freedom moves so i bought chaser aero, painted it stupid white and other dumb things. I did trade my father a S13 coupe for a LS2 though...more on that later.
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc4/66551_437214382943_531157943_5314220_1465324_n.jpg

Badass tire guy hahha
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/59112_429823352943_531157943_5168284_1552438_n.jpg

made some knuckles (gotten some more angle out of it since then)
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc4/155524_456968997943_531157943_5621827_1456565_n.jp g

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash2/76307_455255617943_531157943_5605548_5926816_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/198453_10150111794727944_531157943_6511880_4790368 _n.jpg

Blew up the LS1 at the second D-UP! event, I railed that thing off the limiter all the time and it was fucking awesome (see vids below). I had a few events left, put my old original 5.3l back in and it sucked real bad. put the LS2 back together stock and threw it in to finish up the season, i wanted to build it up but oh well.

Vids from 2010, kinda chronological order
Monticello D-Up shakedown
SFVxY85Imp0

2010 East Coast Bash
1dJS-cUJvzo

2010 XDC NJ qualifying
Uug6v22vZ-o

Clubloose Hotmoves
M8plRmtKXus

My first wall tap
HVkMILt387c

Exterior view of said wall tap
15268079

Jersey Streets 2010 recap vid
Q6lXPcPdgTQ

memphis180sx
03-10-2012, 01:46 PM
awsome!!!!!!!!

MunsonAuto
03-10-2012, 01:58 PM
Car looked like this at the start of winter, 2010
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/168219_485974367943_531157943_6076651_4976959_n.jp g

Started building a fresh LS2. The motor I got came out of a motorcycle, but the owner dropped the thing, pinned the throttle, and took out all 8 rod bearings like a boss. Rebuilt the motor with LY6 (suburban) crank and rodsthat had less than 50miles on them (armored car shop takes brand new vehicles from GM, puts forged stuff in and sells the old stuff), LS2 pistons, LS1 lifters, stock cam, ported polished #243 LS6 heads w/ sodium valves, PRC spring kit, etc etc.
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/155476_456968297943_531157943_5621804_6022484_n.jp g

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc4/148519_456968437943_531157943_5621808_1913345_n.jp g

Improved Racing baffle
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/75105_456968467943_531157943_5621809_2367384_n.jpg

Started to do off-season stuff, remove wiring, batter relocation, cut more off the 1/4 panels, etc etc
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc4/163616_491159882943_531157943_6156041_5059025_n.jp g

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/184879_10150092227547944_531157943_6337465_2154457 _n.jpg

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/183240_10150091654027944_531157943_6330133_6019653 _n.jpg

Got on board with Stance Suspension for 2011! I can't say enough about how happy I've been with Stance and their product. Swapped around springs and some other drift racer things.
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/183582_10150095757717944_531157943_6370640_8277374 _n.jpg

Built my dog this cool snow fort/tower thing
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/190027_10150104473337944_531157943_6452505_7909091 _n.jpg

Judy Jetson shift knob
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/190411_10150104473737944_531157943_6452507_1282230 _n.jpg

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/185878_10150106018842944_531157943_6463412_2921269 _n.jpg

Getting ready for some awesome rattle can paint.
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/183360_10150106705287944_531157943_6469134_2826584 _n.jpg

All rattle canned, primer, base coat, clear...the clear sucked and took two of us to lay it on and keep it wet so it would dry evenly, but we managed.
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/198020_10150107769512944_531157943_6479962_4537015 _n.jpg

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196496_10150107773827944_531157943_6480017_3416929 _n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/199631_10150107774207944_531157943_6480027_6393417 _n.jpg

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/200330_10150107775602944_531157943_6480053_3513327 _n.jpg

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196677_10150107777627944_531157943_6480093_8167254 _n.jpg

Had this skidplate cut/bent up, 6061-T6 aluminum
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196349_10150108152952944_531157943_6483807_3107918 _n.jpg

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/197604_10150108337952944_531157943_6485547_1037924 _n.jpg

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/188473_10150108956447944_531157943_6490223_7711011 _n.jpg

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/188426_10150108957657944_531157943_6490237_7039075 _n.jpg

All done, looking decent before vinyl
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/196533_10150109998552944_531157943_6498293_868141_ n.jpg

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/199883_10150109999147944_531157943_6498309_2234332 _n.jpg

Skidplate mounted
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196880_10150115361057944_531157943_6549604_6335794 _n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196870_10150115361727944_531157943_6549619_3190138 _n.jpg

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/198040_10150119196117944_531157943_6585187_3459466 _n.jpg

MunsonAuto
03-10-2012, 02:10 PM
For 2011, I was making the jump from grassroots stuff to mainly competition driving. Being that I was trying to gain more partners and take things seriously, we took our street car (LS1 & 4l60e 69k original mile super clean coupe) and started to make it a back up car in case I wrecked the hatch, that way we wouldn't miss any events.

Pulling it in the shop to start stripping it down
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc4/164796_481678507943_531157943_6009248_3273167_n.jp g

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc4/163130_481678217943_531157943_6009238_6738_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash2/167398_481677897943_531157943_6009231_4980164_n.jp g

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/166216_481677772943_531157943_6009227_317726_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/168959_481694247943_531157943_6009566_6239308_n.jp g

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc4/164100_482169602943_531157943_6015793_7962742_n.jp g

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash2/168086_482193552943_531157943_6015948_6188750_n.jp g

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/166205_482274262943_531157943_6016964_2791615_n.jp g

Then the coupe was off to get caged
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash2/180528_10150094352302944_531157943_6358878_7493082 _n.jpg

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/183505_10150094349862944_531157943_6358869_6185899 _n.jpg

http://hphotos-sjc1.fbcdn.net/hphotos-snc6/180413_10150094348157944_531157943_6358861_387409_ n.jpg

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/181713_10150094365852944_531157943_6358947_3668013 _n.jpg

First coat of paint
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/183933_10150094620217944_531157943_6361378_4059234 _n.jpg

Origin overs
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash2/180398_10150092213442944_531157943_6337312_604532_ n.jpg

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/185654_10150096460367944_531157943_6376029_7840640 _n.jpg

http://hphotos-sea1.fbcdn.net/hphotos-snc6/180643_10150096460047944_531157943_6376025_5429739 _n.jpg

painted this car all legit. subaru blue black mica
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/188340_10150103530057944_531157943_6447022_786905_ n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/183636_10150103530582944_531157943_6447027_7273057 _n.jpg

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/205595_10150146191412944_531157943_6655816_2724921 _n.jpg

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/215762_10150146190012944_531157943_6655802_317574_ n.jpg

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/205191_10150145541972944_531157943_6650732_3620135 _n.jpg

So the coupe was pretty much done for a back up car at this point...the cage was done and it was prepped for if we had to take a week and swap everything from my current competition car to this one.

29076084

MunsonAuto
03-10-2012, 02:20 PM
So yeah, built that back up car, drove the gold hatch for a bit
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/205207_1639322902534_1220611878_31355284_7326664_n .jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/229179_1707961458455_1220611878_31444320_1075001_n .jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/230864_1706249735663_1220611878_31440905_3002390_n .jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/226374_199145213461613_101723283203807_525961_6152 516_n.jpg

Wrecked it super hard at XDC Orlando
7EzSSZONLHY

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/226748_10150178135302944_531157943_6959797_2146878 _n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/226856_10150178135077944_531157943_6959795_6281711 _n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/226534_10150178133867944_531157943_6959788_2673744 _n.jpg

Long drive home from Orlando to Vermont...got the mess home, tore it down, swapped good stuff into the back up car, did more drift skids.

Wheel tried to bite my feet
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/229309_10150182601892944_531157943_6996164_3311957 _n.jpg

Twisted the firewall/trans tunnel
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/249060_10150182531997944_531157943_6995580_4642478 _n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/228778_10150182415147944_531157943_6994523_590003_ n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/246854_10150182413702944_531157943_6994512_5859494 _n.jpg

Before heading out to NJMP to shake the back up car down
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/253767_10150188603472944_531157943_7054150_3287088 _n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/247666_10150188602287944_531157943_7054140_8267022 _n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/247247_10150188191713148_527358147_7081242_3290020 _n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/253601_805806315752_23109032_38890864_3849790_n.jp g

It used to look nice
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/248753_10150188604432944_531157943_7054160_4810199 _n.jpg

Car had some mad weird hopping/shaking on right hand drifts...turned out to be a bent knuckle and bent traction arm
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/252369_10150191502072944_531157943_7085671_4847004 _n.jpg

Went to XDC Hyperfest, finished 8th or something
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/261249_1702537458014_1675290054_1266975_3555960_n. jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/270391_183266748394713_109224222465633_465934_3857 88_n.jpg

East coast bash happened
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/267545_233165136703255_158204427532660_892571_3064 167_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/267235_1631997178804_1802897695_966568_4830628_n.j pg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/267630_241152545896516_100000053168519_1079291_340 5062_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/261651_1827516607259_1220611878_31561871_5003386_n .jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/260077_245016248847955_181212415228339_1197175_695 6450_n.jpg

painted my wheels white
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/269519_10150221095212944_531157943_7310358_6036611 _n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/270778_10150229185982944_531157943_7401739_5311455 _n.jpg

XDC charlotte
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/269937_236622623024173_158204427532660_909614_7442 25_n.jpg

HTL round 2/Clubloose Hot Moves, 2nd place at HTL
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/285119_220769911299143_101723283203807_624465_4956 008_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/253238_227131800662954_101723283203807_645740_9002 89_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/271149_220770117965789_101723283203807_624470_7671 300_n.jpg

First DMCC event, first "legit" podium, third place, felt cool
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/262595_10150243180817944_531157943_7550293_281610_ n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/251672_10150262978884406_830479405_7244606_1613163 _n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/197630_10150262979304406_830479405_7244616_1240814 _n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/281905_10150275700279697_97530354696_7406801_13114 74_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/222561_10150275707014697_97530354696_7406935_76427 01_n.jpg

shop dog
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/318294_10150268621732944_531157943_7802206_6033433 _n.jpg

more dmcc stuff
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/294205_10150293721259697_97530354696_7591574_80122 95_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/299497_10150350873991273_666111272_9802974_5230941 _n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/293420_10150314710639697_97530354696_7797061_28765 49_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/313265_10150363372879808_143544654807_9816067_4249 51242_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/318429_10150367033597059_730477058_9945238_3891110 _n.jpg

Some Clubloose event
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/319578_10150283782887944_531157943_7922098_1711428 923_n.jpg

Painted the sides of the cowl...freedom moves/htl round 3, first place finish
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/315952_10150383833827329_772172328_10134563_448465 311_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/315785_10150374527565931_651720930_10447528_209013 0657_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/316482_10150374529580931_651720930_10447537_207192 569_n.jpg

Mr.Delicious needs a hawtdawg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/312773_785418807517_26601011_38216764_1386496163_n .jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/312207_280383141973456_100000053168519_1247935_109 9454740_n.jpg

More dmcc
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/316018_10150341181604561_677349560_7855655_8386197 00_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/296630_10150307221745186_715440185_8248822_9264816 93_n.jpg

Peep brad's trapper keeper
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/315667_281552121873417_263419507020012_1073664_163 0597311_n.jpg

HieuHundreds
03-10-2012, 02:22 PM
Honestly I think the rattle can paint job looks amazing, need more details on the materials and what color that is !

Cool build not really feelin the hood scoop though but whatever floats ya boat.

Also this might be a noob question but what exactly is that skid plate for ?

MunsonAuto
03-10-2012, 02:28 PM
Eor hanging like a bawwss
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/316092_281562001872429_263419507020012_1073742_832 258562_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/293647_2273996927041_1162221073_32384977_660497144 _n.jpg

Went to FD irwindale, got super pumped for next season
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/313506_10150315020792944_531157943_8106704_1332258 953_n.jpg

Got a new back up car
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/309882_10150343041487944_531157943_8279154_2053927 254_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/382350_10150343040697944_531157943_8279153_4271558 82_n.jpg

Cut the cage out of my old hatch to eventually put it in the vert
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/390827_10150386180392944_531157943_8464930_5880948 56_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/380026_10150385332772944_531157943_8461103_1175929 915_n.jpg

Old hatch
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/381856_10150386182477944_531157943_8464944_5508519 20_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/380422_10150389356812944_531157943_8476661_1057721 500_n.jpg

Build type stuff, yeah! After 2011 season, I was lucky enough to be chosen as a member of the 2012 ASD Mob program. The guys at ASD are incredible and I am super proud to be apart of such an awesome team. Also for 2012 I've got a lot of great new partners on board and I am ecstatic to be able to represent such great companies. Please take a minute or two to head over to my partners page (Partners/Sponsors (http://www.tannermunsondrifting.com/Partners_Sponsors.html)) and show them all some love! With 2012 shaping up to be incredible it was time to build another back up car and rebuild the comp car.

Also built/swapped this 1969 LS1 swapped Jaguar E-Type over last year/winter and stuff, I did some fab stuff on it, I hate this car.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/386092_10150459223147944_531157943_8748925_2429870 50_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/392341_10150459222062944_531157943_8748922_9764529 00_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/396441_10150459214192944_1414300682_n.jpg

Comp car stuff:
Start of the rebuild
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/395231_265517750184715_212380202165137_611493_1027 199132_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/431198_265519280184562_212380202165137_611497_2101 148109_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/399779_265519413517882_212380202165137_611501_1092 853011_n.jpg

LS2 all torn down
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/401435_265519506851206_212380202165137_611504_7912 26946_n.jpg

Test fitting Sikky stuff
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/426237_265521090184381_212380202165137_611510_1797 270156_n.jpg

time to remove the heater core and stuff
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/429312_265521170184373_212380202165137_611513_1197 557626_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/402704_265521193517704_212380202165137_611514_1044 668701_n.jpg

Welded some stuff
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/421361_265521286851028_212380202165137_611518_4058 86008_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/417274_265521423517681_212380202165137_611524_4957 19521_n.jpg

Swapping valve sprangs
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/398728_265521493517674_212380202165137_611526_5362 80006_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/429522_265521590184331_212380202165137_611529_3485 23410_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/426423_265532596849897_212380202165137_611568_1815 840079_n.jpg

Wiring stuffs
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/425765_266279066775250_212380202165137_612864_8858 47261_n.jpg

Ford style starter wiring
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/429165_266279136775243_212380202165137_612867_4997 09460_n.jpg

Gauge panel/setup
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/417112_266279746775182_212380202165137_612870_7878 74954_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/420790_266279803441843_212380202165137_612872_8897 09104_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/421502_266279890108501_212380202165137_612876_2849 41860_n.jpg

Built an exhaust
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/408068_271227146280442_212380202165137_620917_2084 610643_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/431438_271227176280439_212380202165137_620918_1275 505306_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/427545_271227269613763_914610000_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/396507_271227339613756_212380202165137_620923_2139 584141_n.jpg

Got George's sick dual caliper kit
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/431731_274616019274888_212380202165137_626107_1496 821500_n.jpg

Sikky oil filter relocation kit and bracket i made
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/430849_274616162608207_212380202165137_626111_8951 24846_n.jpg

Overflow for the overflow...DMCC Rules
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/429223_274616212608202_212380202165137_626112_1235 791699_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/405858_274616269274863_212380202165137_626113_2885 43230_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/432228_275966279139862_212380202165137_628940_1326 044068_n.jpg

Heatshield Products is on board for 2012 to help keep my under hood temps in check! This stuff is super awesome, they also hooked me up with some "Lava Mat", no more melted shoes for me!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/417366_285418328194657_212380202165137_649785_2054 775849_n.jpg

Comp car is pretty much done. Finishing up some wiring and lighting, gotta strip the vinyl off, buff it, then revinyl the car. Dyno date on the 19th then it's off to Clubloose on the 31st for Opening Moves.

Burnout vid:
DqRkBuij4QE

ls2champ
03-10-2012, 02:33 PM
I was thinking the same thing! That paint job looked awesome !

Did you guys use regular rattle can tips?

MunsonAuto
03-10-2012, 02:37 PM
Honestly I think the rattle can paint job looks amazing, need more details on the materials and what color that is !

Cool build not really feelin the hood scoop though but whatever floats ya boat.

Also this might be a noob question but what exactly is that skid plate for ?

The rattle can was all Rustoleum product. We used their red primer, followed by the "Gold Metallic" paint, and topped with their "Crystal Clear". The gold is a really transparent color so it's best laid down over a darker base coat. It took us almost 15 cans to get that much gold/metallic shine out of it. I would suggest trying it over a black primer if you're gonna give it a shot.

The skidplate is just to protect the oil pan and front subframe/crossmember from any offtrack excursions I might have. Some tracks have some gnarly drop-offs from the track to the grass/rumble strips haha, just trying to keep things safe!

MunsonAuto
03-10-2012, 02:38 PM
I was thinking the same thing! That paint job looked awesome !

Did you guys use regular rattle can tips?

Thanks! Yeah, we used the traditional spray can tips, we did use the Rustoleum handle/trigger things though; but the can tip was whatever came on the can.

MunsonAuto
03-10-2012, 02:49 PM
Convertible turbo V8 backup/street car build! I've always wanted to do a turbo potato potato LSx...finally said hell with it and devised a plan.

Bought this truck in Illinois
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/306345_10150263919937944_531157943_7759140_1307081 _n.jpg

Got home with it Thursday, Friday afternoon the 4.8L was out and my backup race motor (LS6) was in and running Saturday afternoon
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/297438_10150263193957944_531157943_7752280_309598_ n.jpg

Picked up this turbo from a buddy with intentions of putting it on said truck...that's on the back burner due to drifting
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/394364_252132371523253_212380202165137_581736_1776 424207_n.jpg

Devised plan was sweet daily driver truck with race motor, 4.8l truck motor in vert backup car with turbo and other obnoxious stuff. Grabbed a Masterpower T70 turbo for the vert!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/407493_252132411523249_212380202165137_581737_8887 24847_n.jpg

LS6 cam for vert
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/401662_252132488189908_212380202165137_581740_1607 533380_n.jpg

Turbo goodies
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/404316_252132461523244_212380202165137_581739_2113 386345_n.jpg

Box of Texas Speed & Perf goods
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/402402_252132508189906_212380202165137_581741_4402 82639_n.jpg

Took this stock silverado y-pipe flange and made a turbo flange/collector
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/407148_252132588189898_212380202165137_581743_1866 007281_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/404343_252132681523222_212380202165137_581746_1022 753905_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/395181_252132834856540_212380202165137_581752_7165 43069_n.jpg

Shipped the T56 off to Rick at RKT56 (Precision Built Drivetrains | RKT56.com (http://www.rkt56.com)) to have it built. I had my first T56 rebuilt at RKT56 during the middle of the 2010 season and it has been absolutely flawless since then. RKT56 is on board in supporting me this season and they've done another amazing job on my latest T56 for the Vert! If any of you out there are looking to have a T56, T6060, etc rebuilt or built, contact RKT56 (Precision Built Drivetrains | RKT56.com (http://www.rkt56.com))!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/407072_256424207760736_212380202165137_591125_1397 876226_n.jpg

4.8l on the stand before I tore it down
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/420051_285396938196796_212380202165137_649669_3303 19143_n.jpg

Started swapping valvesprings with the intention of doing springs, oil pump and cam swap
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/431033_285396994863457_212380202165137_649671_2724 65786_n.jpg

Pulled the next plug and this ran out
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/424091_285396961530127_212380202165137_649670_1577 188811_n.jpg

Pulled the paper towels out of the intake and exhaust ports and started poking around...motor came out of my truck, got wrapped up and put in a dry corner of the shop...I still can't figure out how it got this much water in it, even the bad headgaskets shouldn't have cause this much..oh well.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/421797_285397084863448_212380202165137_649673_1023 040914_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/419558_285397118196778_212380202165137_649674_1783 726247_n.jpg

Found this retainer clip of some sort that was in there since whoever did the headgaskets on this motor before I got it
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/423967_285397154863441_212380202165137_649675_1092 626924_n.jpg

Popped the heads off...gross
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/419144_285397181530105_212380202165137_649676_5344 16983_n.jpg

Other bank...previous owner had headgaskets done...they used some of the cheapest gaskets and bolts I've ever seen....super lame. Only drove the truck with this motor for three days, coolant dropped a little, but not enough to be alarming in those three days, never overheated...weird.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/427610_285397271530096_212380202165137_649678_3491 22349_n.jpg

Valves pulled
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/419445_285397301530093_212380202165137_649679_2367 36258_n.jpg

Bottom end was still good and fresh looking
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/431540_285397351530088_212380202165137_649680_2288 60540_n.jpg

After attempting to clean the 4.8l heads and valves to no avail (valves were all pitted and corroded) I decided to just throw on a set of #241 LS1 heads and new GM gaskets and bolts and all that jazz. The only downfall is this drops my compression from stock 4.8l, 9.5:1 to 8.8:1. This is better for boost obviously, but I'm worried about the motor being a bit more of a dog out of boost due to the 4.8l's shorter stroke...only time will tell, I think it'll still be fun regardless, but we'll see.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/428086_285397524863404_212380202165137_649685_2003 778615_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/424222_285397564863400_212380202165137_649686_9413 91840_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/423221_285397598196730_212380202165137_649688_8684 61483_n.jpg

Motor and turbo mockup
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/423423_285397698196720_212380202165137_649690_8111 5525_n.jpg

Bracket/flangey collector jobbie made
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/428768_285397784863378_212380202165137_649692_6326 46725_n.jpg

Hoodstack? Yay or nay? Thoughts?
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/426843_285397881530035_212380202165137_649695_1353 288205_n.jpg

Only rust on the vert was from where the previous owner let a bad/leaking battery sit and it rotted out the battery tray. So I cut the rust free battery tray from my hatch out and sectioned it into the vert.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/64641_285397918196698_212380202165137_649696_11785 25653_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/431205_285397974863359_212380202165137_649697_5370 65725_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/421358_285398014863355_212380202165137_649698_7020 694_n.jpg

Engine bay prepped
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/426360_285398068196683_212380202165137_649699_1872 044476_n.jpg

All paint done with rattle cans
Basecoat
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/422135_285398108196679_212380202165137_649700_1750 023107_n.jpg

First coat
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/417358_285398144863342_212380202165137_649701_2011 366144_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/419300_285398184863338_212380202165137_649702_2886 80380_n.jpg

Clear
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/425930_285398258196664_212380202165137_649704_8106 50331_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/423806_285398548196635_212380202165137_649712_1193 6693_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/419904_285398624863294_212380202165137_649715_1844 86020_n.jpg

Dried and in some sunlight
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/424290_285413961528427_212380202165137_649765_1861 714524_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/428120_285413998195090_212380202165137_649766_1156 055955_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/430735_285414068195083_212380202165137_649768_2052 623955_n.jpg

Turbo manifold collectors
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/430055_285398218196668_212380202165137_649703_2510 22251_n.jpg

Passenger side collector and flange/merge pipe thinger
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/420525_285398291529994_212380202165137_649705_7448 15614_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/425294_285398364863320_212380202165137_649707_4697 43394_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/423029_285398404863316_212380202165137_649709_1472 04665_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/432308_285398458196644_212380202165137_649710_1323 882658_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/421076_285398491529974_212380202165137_649711_9566 94326_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/431697_285398804863276_212380202165137_649721_4432 34403_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/422612_285398861529937_212380202165137_649722_9574 11712_n.jpg

Built trans back from RKT56
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/418054_285406754862481_212380202165137_649744_1896 952691_n.jpg

Crossover pipe and drivers side collector tacked
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/s720x720/64173_285413914861765_212380202165137_649763_16946 47476_n.jpg

MunsonAuto
03-10-2012, 02:49 PM
Intercooler goodies
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/417976_285413948195095_212380202165137_649764_4373 53238_n.jpg

Early truck blocks didn't have the threads/provision for a LS1/fbody alternator, so I got to drilling and tapping!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/420838_285414128195077_212380202165137_649770_1362 943162_n.jpg

Crossover pipe clearances
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/431408_285416621528161_212380202165137_649777_1641 119646_n.jpg

Passenger side manifold tacked/mocked up
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/423256_285416701528153_212380202165137_649779_1303 73995_n.jpg

Welded up
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/419343_285416561528167_212380202165137_649775_1208 769646_n.jpg

That's pretty much it for now...crossover pipe and drivers side manifold is all welded up. Crossover pipe is it's own piece, v-bands on each end so removal of everything should be rather simple. Next up is intercooler plumbing then it's onto wiring and chassis/interior prep stuff.

Please feel free to ask any questions you might have and I'll do my best to answer them. Thanks for checking out my thread/website/fanpage and showing support!

MrFairlady
03-10-2012, 02:53 PM
good lord

" and to think.....these forum's...nearly got Munsoned"

love it.
munson310 is my email addy.
sorry. Had to.

Welcome and thats a helluva good 2 posts

Pinggg
03-10-2012, 04:10 PM
Love the build!
Keep it up.

igot2fortiesOE
03-10-2012, 04:56 PM
OMG. just went from went through the whole post. I WANT MORE! one word. AWESOME! great work. That definitely boosted my motivation. Thank you for that. Now keep'em coming.

shaggy0778
03-10-2012, 05:00 PM
What kind of paint did you use on that engine bay? looks sick!

oOI WEST IOo
03-10-2012, 06:49 PM
im moist http://fc07.deviantart.net/fs70/f/2010/022/6/4/That_makes_me_Moist_by_moistplz.jpg

fallen_51
03-10-2012, 07:24 PM
This is amazing !!!

Vitzio240sx
03-11-2012, 10:36 AM
Wow speechless. This is one of the best build thread i have ever seen. I specially like the fact that you gave us a photographic timeline of your drifting career, all the way from where you started to where you are now, and those photographs make it come to life. Good job dude

Buriantsu
03-11-2012, 10:47 AM
Sickness!!

Mardo
03-11-2012, 12:02 PM
Wow. I am speechless.

Metal Angel
03-11-2012, 01:10 PM
I don't care how many cylinders or turbos your car has, FIVE wisdom teeth? That's rad!!!

MunsonAuto
03-11-2012, 07:57 PM
The backup car engine bay paint is another Rustoleum product. I've only been able to find it at one local Lowes so I'm assuming it's something new-ish. The can reads Rustoleum Colorshift and that's about it haha. Lowe's only had two colors, the purple/blue that I ended up using and a green/red as well.

Hahah, 5 wisdom teeth sucks! 3 of the 5 were impacted pretty good so my jaw is aching pretty good, but nothing unbearable by any means. My family has a history of excess wisdom teeth...my sister had 4 removed several years ago, then a while back dentists found 2 more and had to remove those.

Thanks for the kinds words dudes! Fans and support like you guys really helps keep this fun! I should have some more updates in the next couple days. While I've been down this weekend due to these teeth my father's put in some work and on getting the front end of the comp car reassembled and the new manual up/down stock light setup done. I was able to get out there and remove most of last years vinyl and start eyeballing placement of this years stuff before I had to take some more pain meds and get back to Forza haha. Pics to come soon!

Pantaloons
03-11-2012, 10:25 PM
can I sketch you?

MunsonAuto
03-11-2012, 11:37 PM
Do you like luxury?

ka-titties
03-12-2012, 08:06 AM
can I sketch you?
http://weknowmemes.com/wp-content/uploads/2011/09/jack-draw-me-like-one-of-your-french-girls-spiderman.jpg

Black240Ct
03-12-2012, 11:17 AM
this shit is viral

MunsonAuto
03-12-2012, 04:45 PM
^^That's the goal Lindsey BROhan!

Some updates y'all!
Couple quick pictures of the turbo vert crossover pipe/manifold parts
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/422134_286793904723766_212380202165137_652745_1340 591677_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/428629_286793941390429_212380202165137_652746_1375 447394_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/420730_286793968057093_212380202165137_652747_7379 29163_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/419612_286794031390420_212380202165137_652750_2015 559171_n.jpg


Over my weekend of decommission dad got the front end back on the competition car and the manual headlight adjusters all done up. I got most of last years vinyl off and left some that I'm gonna try and re-use for this season.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/423515_287227054680451_212380202165137_654147_1130 186561_n.jpg

Top 10mm adjuster nut. Spinning this nut raises or lowers the light assembly.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/417729_287267174676439_212380202165137_654303_3699 33548_n.jpg

The threaded rod spins through this fixed (height wise, it pivots as the light goes up/down) adjuster nut, thus drawing the light down or pushing it up.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/421813_287267121343111_212380202165137_654302_1011 784935_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/428996_287267094676447_212380202165137_654301_1207 108789_n.jpg

Quick interior pic. I've still gotta coat the floors, install my new aluminum door panels and line the drivers side with Heatshield Products "Lava Mat" to keep from burning my new shoes, but this shows you the switchez on switchez setup and the awesome ASD hydro E-brake assembly I'm running. I had a chance to give the new e-brake setup a quick test today and let me tell you, this setup GRABS! I'm thoroughly impressed with the quality of both ASD's e-brake assembly and George Marstanovic's dual caliper setup. These two combined is garaunteed to give you the perfect hydro e-brake you've dreamed of!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/430635_287267008009789_212380202165137_654298_1585 114670_n.jpg



I also got a call from the local freight yard today; my first order of Falken Tires had arrived! I cannot express enough how ecstatic I am to be on board with Falken Tire this season. Being that I'd been laying around all weekend due to this damn wisdom teeth removal I said hell with it and off I went in the brodozer to pick up my 20 tires! The guys at the freight yard were very helpful and loaded the pallet right in the back of the truck for me. A couple ratchet straps to secure the load and off I went!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/432017_287227098013780_212380202165137_654148_2030 610154_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/423319_287227161347107_212380202165137_654149_1248 902684_n.jpg

89JDM240sx
03-12-2012, 05:42 PM
Ooooooo Mannnnnnn!!! Good stuff!! What color is the bay?

flatout
03-12-2012, 06:21 PM
very nice man..cant wait to see the rest off this build or whatever else you post up

dopplganger1
03-12-2012, 07:07 PM
how did you like the dc2 seat and what bracket did you use? how high did it sit compared to stock?

MunsonAuto
03-12-2012, 07:46 PM
Ooooooo Mannnnnnn!!! Good stuff!! What color is the bay? Which one? The back up car is Rustoleum Colorshift, I think they only have two colors, a red/green and the purple/blue that I used. The competition car is a Valspar rattle can and it's some sort of grey *shrug* haha. I can't remember what the Valspar can says on it for the exact color off the top of my head. The Valspar was laid down over a traditional primer in spots and the factory Nissan paint, the Rustoleum was laid down over a Rustoleum primer on top of the factory Nissan paint. I've gotta be honest and say that the Valspar product covers much better and is far more scratch resistant than the Rustoleum.

how did you like the dc2 seat and what bracket did you use? how high did it sit compared to stock?
I absolutely LOVED the DC2's back when I had them. They were a great seat for a DD/street car, not too bad to get in and out of yet they held you in place very well. I had to build a totally custom bracket for them which was a real pain at the time, because they're a bottom mount seat, but mostly due to the fact that I was 17 then and didn't have much fabrication skill haha. Seeing's how I made a custom bracket they sat a bit lower than factory seats. I'm not aware of any "bolt in/aftermarket" brackets for putting the DC2's in a S13/4. I hope that info helps you out a bit!

pinkarrowsnow
03-12-2012, 08:15 PM
lol its mike vogt your build thread gets me every time even though ive seen the progress of your car in person for the past 2.5 years hahah see you the 31st broo even though my new car wont be done yet...

MunsonAuto
03-12-2012, 08:36 PM
lol its mike vogt your build thread gets me every time even though ive seen the progress of your car in person for the past 2.5 years hahah see you the 31st broo even though my new car wont be done yet...
Bring a shopping cart...I'll tow you around the track bru...you can wear your helmet/suit/get-up and make racecar noises and movements, like this guy >>:2f2f:

phearski
03-12-2012, 08:38 PM
Mrs. Jetson. Has a sweet bootah.

pinkarrowsnow
03-13-2012, 08:12 AM
Bring a shopping cart...I'll tow you around the track bru...you can wear your helmet/suit/get-up and make racecar noises and movements, like this guy >>:2f2f:

Lol im going too and put a gopro on a stick and film cool in car footage plus a few of my buddys are going and its there first times out so ill be giving a helping hand!:bigok:

thenooblet
03-13-2012, 09:08 AM
I have some of that rustoleum colorshift stuff and you have to put in on over a black base/primer or it doesn't work right. The more you put on the better it turns out.

MunsonAuto
03-13-2012, 11:17 AM
Lol im going too put a gopro on a stick and film cool in car footage

This sounds sweet...some dudes did this at one dmcc event and the footage was cool. I still have a passenger seat...sup!?

03-13-2012, 01:05 PM
Doin it big

S13project
03-13-2012, 07:22 PM
good god tanner. laying out that much in two posts is just ungodly. you gotta let it simmer a bit before you going throwing 30+ pictures of awesome build at people.

loving the builds tho. even after you explained most of this i guess it just didnt sink in completely until i got to see all the pics that correspond with the words.

keep it up and send me some of those aluminum door panels! i needs em.

AceUp
03-13-2012, 08:33 PM
Dannng man super awesome build!! Good luck this year!

Junior x
03-13-2012, 09:52 PM
just jellin over here. damn.

MunsonAuto
03-20-2012, 11:15 AM
NauPcbdNK80&

Pantaloons
03-21-2012, 12:07 AM
how many ponies??

MeSs
03-21-2012, 07:12 AM
Niiice!! Whats the color code of the gold can paint? :)

Prove It
03-21-2012, 07:23 AM
I remember at XDC Orlando i almost fought some kid because he was drunk and screaming at you saying your a pussy for wrecking and you should still be driving haha. K00K. sick cars though man. good luck for the coming year