PDA

View Full Version : 5 lug conversion situation...

odyvia13
03-06-2012, 01:58 PM
going to make my 92 Hatch from a 4 lug to a 5 lug cause as you know there are not enough choices for rims that are 4 lug. So i'm looking around for some 5 lug Disc brakes for my S13 but i can't find any... so are there any good disc brakes out there for front and rear ?
benz88
03-06-2012, 02:02 PM
go with S14 5lug discs.
ryandriftingfat
03-06-2012, 02:04 PM
Rotors are the same shit as S14 SE.

I have S14 rotors on my S13 right now.
shaggy sr
03-06-2012, 02:04 PM
too much work to swap.
Grocery Cart
03-07-2012, 07:47 AM
too much work to swap.

Took me like 2 hours for the front and 3 hours for the rear (I honestly had no idea what I was doing). It's really not that much work.

As for rotors, I lucked out. The s14 I had that I took the 5 lug off had Brembo rotors. :wiggle:
trevor34
03-07-2012, 08:01 AM
I have a full 5 lug and a complete front brake setup. PM me if you want more info.
CamryOnBronze
03-07-2012, 08:02 AM
http://img844.imageshack.us/img844/9777/situationi.jpg
mikeys13
03-07-2012, 09:38 AM
Just do a j30 or q45 brake swap. Rears do the z31 caliper bracket with 2002 altima rotors, bigger brakes accomplished and all rotors drilled for 5 lug. Why has nobody thought to suggest this?
benz88
03-07-2012, 09:05 PM
Not everyone has easy access to J30's or Qs,
mikeys13
03-07-2012, 10:36 PM
Still suggestions, and also I have a pair of j30 calipers im selling.
Darren
03-07-2012, 11:11 PM
I found a ~95 J30 in the junkyard... they're around

Also, lots of people are selling the z/skyline calipers for cheapish now
CilvestDrad
03-08-2012, 12:06 AM
I have S14 rotors on my S13 right now.

http://www.1000seotips.com/song3.jpghttp://www.1000seotips.com/song2.jpg
http://www.sunlian.net/1.jpg
ILoveJDM
03-08-2012, 01:08 AM
do 5 lug rotors instead of drilling yours out,
drilling 5 lug consumed more time than actually swapping to 5lug
DamianN.
03-08-2012, 01:16 AM
do 5 lug rotors instead of drilling yours out,
drilling 5 lug consumed more time than actually swapping to 5lug

True fucking story. Killed some drill bits too.
Hashiriya415
03-08-2012, 02:23 AM
Can't find many 4 lug wheels has to be a joke. They been made for decades by tons of manufactures.
ILoveJDM
03-08-2012, 04:51 AM
True fucking story. Killed some drill bits too.
i went through 3 titanium bits, which was getting expensive so i resorted to some random ones in the garage after the 3rd.
[email protected]
03-08-2012, 08:09 AM
We sell our own gas slotted rotors if you wanted to go the performance direction, we produce them in house, around $84.00 a piece. Can ship same day.

Or non-slotted for around 49.00 a piece.
Hashiriya415
03-08-2012, 02:12 PM
Occasional hard spots in the cast iron can break the tip of a drill bit if you apply excessive pressure on the tip of the bit. Take it slow about 500rpm and keep lubricating. I don't know how you guys are drilling but I used 1 drill bit for about 10 rotors and plenty of other metal drilling too.