Geezy
02-22-2012, 05:23 PM
so im trying to figure out how to route my vacuum hoses with my boost controller and still maintain my EVAP system.
i know the boost controller has the little filters on there and what not, but im not sure if its safe to tee off the vacuum hoses that go to the evap.
ninja edit: i don't have any taps that go into the turbo or intercooler piping... and i DONT wanna drill and tap it myself and throw some bullshit jbweld to seal it
also, do i NEED to use "fuel safe vacuum hose?"
because it doesn't really make sense to have regular vacuum hose and tee off "fuel safe" vacuum hose... IDK. i need advice.
here's my diagram.
http://zilvia.net/f/attachment.php?attachmentid=34308&stc=1&d=1329960284
http://zilvia.net/f/attachment.php?attachmentid=34306&stc=1&d=1329956324
i know the boost controller has the little filters on there and what not, but im not sure if its safe to tee off the vacuum hoses that go to the evap.
ninja edit: i don't have any taps that go into the turbo or intercooler piping... and i DONT wanna drill and tap it myself and throw some bullshit jbweld to seal it
also, do i NEED to use "fuel safe vacuum hose?"
because it doesn't really make sense to have regular vacuum hose and tee off "fuel safe" vacuum hose... IDK. i need advice.
here's my diagram.
http://zilvia.net/f/attachment.php?attachmentid=34308&stc=1&d=1329960284
http://zilvia.net/f/attachment.php?attachmentid=34306&stc=1&d=1329956324