PDA

View Full Version : SC n60/ka mafs, ka clutch, s13 head...tons of crap.


NoPistons!
02-22-2012, 02:08 PM
PIcs as promised. Little late but thanks for being patient.

Prices do not include shipping
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/027-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/038-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/053-1.jpg

I have 2 n60 mafs with pigtail $60 ea (three pictured, i need one for my build)
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/041-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/043-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/044-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/045-1.jpg

Bosch maf from a saab or volvo. I forget Comes with pigtail $40

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/046-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/040-1.jpg

2 pathfinder sohc vg30 mafs $25 each
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/039-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/047-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/048-1.jpg

1 dohc s13 kade maf with pigtail $25

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/050-1.jpg

2 mtx s13 kade ecu $45 each

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/037-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/036-1.jpg

1 auto s13 kade ecu $50

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/035-1.jpg

S13 kade dizzy with aftermarket wires (works fine) $50
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/032-1.jpg
I'll include stock wires too.

clutch with flywheel (oe kade) with under 3k miles on it $125 comes with flywheel bolts. SOLD

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/010-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/011-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/012-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/013-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/020.jpg

Half taken apart kade s13 head. $50
Was checking valves for bends and deck for flatness. Deck and valves seem ok. I pulled half the intake valves out and none were bent so i just would assume they're good. Deck was checked with straight edge and feeler gauge. Was shaved less than 3k ago to bump compression.

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/009-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/031-1.jpg

Upper timing cover s13 kade $15 You may want to pick this up with that cylinder head. They were mated together at one point.

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/034-1.jpg

Oil pan $25 (comes w/bolts)

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/033-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/057-1.jpg

Power steering pump (kade) $30 It's hanging underneath my car but rest assured it exists..... Lol.

kade valve cover $25

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/051-1.jpg


Aem intake tube that's been painted over $30 SOLD

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/049-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/030-1.jpg

filter, maf, coupler not included.

intake manifolds (kade) $40 each. Throttle body not included. Just upper and lowers. One lower has factory vac tube with butterflies. The other is gutted. Your pic.

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/029-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/028-1.jpg



248/232 cams w/gears $30 for the pair. Normal high milage wear marks on journals.
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/017.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/018.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/019.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/020.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/021.jpg

Dont know why but the orange marks on both cams aren't there anymore. THey were plain as day before i tossed them in a bin and threw them in storage for 5 months. Nobody messed with them But they are both exhaust cams. One has the number 4 cast into it, the other has the number 3 cast into it. Hope that helps with id for verification. I honestly dont know much about them. Thats what i was told was in the motor and idle was really lumpy v8 sounding (probably because engine was near death with shit for compression without me knowing.....)

Brand new upper timing chain with brand new cam gears $20 In the pic with the cylinder head stuff. Zipped together in the bin. Less than 3k on those.



Random used timing chains, gears and used tensioners/guides $20 for the whole box. Whatever is in here will be sealed up and sent to you. lol.

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/008.jpg

New timing gear thing that goes into the ka head for the cams I dunno wtf it's called $15 (not pictured but i has)

New cam timing chain tensioner kade $15 (not pictured but i has. it's in that box of timing parts, springs and valve buckets)




Fart can $10

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/052-1.jpg

s14 exhaust mani $15

SR downpipe. Seen some low car abuse $25

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/015.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/016.jpg

Oil filter block doohicky $10

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/056-2.jpg

Dipstick $10



Pick up tube $10

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/055-1.jpg


Used arp rod bolts in ka rods. I will remove the pistons because they're junk but since they are IN the rods you get the rods too. Um, i'll toss in the wrist pins and c-clips as well. If you choose to run these rods, it's at your own risk. Bearings weren't spun or anything but the pistons broke ringlands on top and i dont know what kind of stress that puts on rods. It was enough to dent the tops of the pistons but not bend the valves so i'm hoping you come out on top with good rod bolts AND good rods. Just being honest here. Would never try put anyone through some of the b/s i've had to go through in the car game buying parts. Get the rods checked out. $35

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/026-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/025-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/024-1.jpg
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/023-1.jpg

GM coils from v6. Have pigtail, hardware, mount plate. $75

http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/022-2.jpg

Gm map sensor w/pigtail $10

Gm ait sensor w/pigtail $10

Above parts were going to be used for megasquirt but i'm over being a control freak with how i build cars. Going in an entirely different direction so my loss, your gain.

Ah, and added today....

S13 tie rods. Boots are torn, one of the inners has ball joint play but the ends are GOOD. Boots not torn, play or anything like that. $15
http://i1236.photobucket.com/albums/ff457/potatoesbarnaby/054-1.jpg






Prices do NOT include shipping. CC, money order or paypal works. I have vouches for my credibility if you need them for your peace of mind.


Will trade stuff for a 71c 5 speed z31 bellhousing, 255 in tank fuel pump, 044 external, 6 rx7 top feed injectors, um........not sure what else i think i need right now besides some silvia lights. projectors because i'm not ballin hard enough for bricks. lol. Um, also looking for intercooler piping, couplers, reducer couplers, JWT z31 ecu/nistune, wideband 02......any sort of gauges (old school hks, greddy stuff plzzzzz :D ), dildo shifter, aftermarket tension rods..... Hub, steering wheel...... Crap i can toss on my car and have fun with i guess.


I hope everything looks ok. Thanks again for checking this out. Please bump after viewing or pm.

rpierce
02-22-2012, 03:58 PM
how much for the intake tube shipped to 45432?

if you have any pics that would be great

90S13hatch_tony
02-22-2012, 04:12 PM
Im interested in the cams lmk at (324)774-7149

lockhaim
02-22-2012, 11:31 PM
Pics of clutch? Pm me..

NoPistons!
02-23-2012, 02:39 AM
Pm's replied. Just got off work. Pics and price shipped quotes will be up/sent friday at the latest.


Thanks.

Edit: Laid everything out this afternoon and snapped pics. I have stuff i forgot i had and am opting NOT to get rid of my hud or cluster at the current time.

Will go ahead and get those up for you guys friday morning. Thanks for the replies, patience and interest!

Also, aem intake that was painted over, previous owner masked off the carb/aem sticker so that is still visible. Snapped a pic of that as well.

NoPistons!
02-24-2012, 02:09 PM
bump 4 pix

Oh and because i'm not bothering to edit that post again for a while, there are a good pair of motor mounts in the pic with the sr downpipe.

Asking $25 for those.

Also have a stock s13 kade coil pack in good shape $20

NoPistons!
02-27-2012, 12:11 AM
Bump.

Taking offers. Lets get some stuff soooooollllllddddd.

NoPistons!
03-01-2012, 01:01 AM
Bump again for obo.

Surely there is something you need here.

J-Spec_S13
03-01-2012, 02:04 AM
how much for sr downpipe shipped to 79907?

NoPistons!
03-10-2012, 01:46 AM
Tie rods/ends no longer f/s. OBO!1!1! final bump. If you want something this will be the last week of this little clean-out sale.