Fully Built SLEEVED SR20DET! CHEAP!!!!!

[Imarvin240]

Mazworx SR20DET Engine- $4,500 (complete longblock)...costs over $9.5k to have built

-has about 3k miles on it (mostly break in, dyno, and only about 2 weeks of actual street driving before taking it out...no track events or anything)

HEAD- - $2,750 (complete head)
New SR20DET Head
Stage 2 Port and Polish
Polished Combustion Chamber
Full Radius Valve job
Tomei Intake Cam Gear
HKS Exhaust Cam Gear
Tomei Solid Lifters
Tomei 270 Cams
Brian Crower Springs and Titanium Retainers
Supertech Valves
HKS Rocker Arm Stoppers
SR20DET Powder Coated Valve Cover
New Rocker Arms
Apexi Head Gasket
Whatever I Forgot

BLOCK- - $2,750 (complete shortblock)
CP Pistons 86.5mm 9.0 CR
Darton Sleeves
Manley Turbo Tuff Rods
Calico Coated ACL Race Bearings
ARP Main Studs
Balanced & Polished Crankshaft
New Water Pump
New Oil Pump
Upper Oil Pan
OEM Oil Pan- (can keep greddy on for more $)
OEM Crank Pulley- (can keep ATI on for more $)
Sleeving
Bore/Hone
Whatever I Forgot

PHOTOS:

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/426980_10150614522851754_526896753_10925674_770334 76_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash2/27807_416961481753_526896753_5276662_1936734_n.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc3/27807_416961496753_526896753_5276663_4413004_n.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash2/27807_417047321753_526896753_5278536_1362043_n.jpg

I have the dyno sheet/spec sheet from Mazworx/ and some pther papers if requested.

[Mike - E]

pmd u sir.

[Imarvin240]

bump bump bump

[Imarvin240]

bump it up!

[Silvia716]

Go smoke an other one lmfao

[Imarvin240]

well, i talked to the person through PM who said the comment above and this is what was said

what did your comment mean on the sleeved sr thread it ment that what ever your smoking, smoke an other one cuz you could buy a block and head fully build and stroke it for 4,500 with VVT

well, i will try and be respectful, unlike you who feels like thread bashing...but do you have any experience in getting an engine fully built? i have built 4 sr engines and a couple RBs, and they are not cheap to build. just in parts, i have over 7k, so...maybe you are talking about a much lower quality build...the 7k doesnt include any machine work. also, mazworx is one of the most well known machine shops in the country because of the quality of there work. if you feel like like you can get an exact replica or better of this engine built with parts and machine work for 4500, go for it and good luck. i would love to see that.

anyone who has "FULLY" built an engine will know that it is not cheap and that this is a very good price. get a quote from mazworx or any other machine shop, you wont be able to get an exact copy of this engine made for anywhere near this price.

MODS, I apologize for the third post but i felt it was needed to explain what was being said about the price of the engine.

[199240sxcoupe]

well, i talked to the person through PM who said the comment above and this is what was said



anyone who has "FULLY" built an engine will know that it is not cheap and that this is a very good price. get a quote from mazworx or any other machine shop, you wont be able to get an exact copy of this engine made for anywhere near this price.

MODS, I apologize for the third post but i felt it was needed to explain what was being said about the price of the engine.

lol wow people now a days
i havent fully built a motor but i kno it gets expensive i did a mild build on my old ka.. lol regardless glws man great parts

[crayzwhiteboy]

y spend 9.5k in an engine and only use it for 2 weeks?

[SaVAgES14]

Why are you parting with this beauty?

[Imarvin240]

look at my build thread, it explains everything. I now have a Mazworx SR22VE-T

as requested, here is the link to the build thread- http://zilvia.net/f/chat/420428-imarvin240s-sr22ve-t-350z-time-attack-car-build.html

[SaVAgES14]

That's cool can you post a link?

[Q.Smooth127]

I would like to have your high paying job where you can get a mazworx standard SR built motor only to upgrade to an SR20VE-T from mazworx as well AND have it custom'd into a 350z shell.

[Leetfade]

That is actually a very good price for that build. GLWS

[whiteashes]

Does it come w anything besides the longblock?

[Imarvin240]

i can add more parts at a very low price if requested.

[speedgod^s13]

This build sounds like it has a lot of potential. What I don't get is why sleeve the block, then end up running stock size pistons?

[Imarvin240]

This build sounds like it has a lot of potential. What I don't get is why sleeve the block, then end up running stock size pistons?

whats the problem with running stock bore pistons? on my new engine, which i have a build thread on, i did go with a stroked sr22vet...but you can still make great power on stock bore, no real problem with it. here is the dyno sheet for what the stock bore sr made on 16lbs with a T67 turbo setup.

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/409300_10150650105931754_526896753_11029061_861866 921_n.jpg

[1slicktwo4oh]

Sleeving the block is for strength/handles higher boost levels...not necessarily just to run bigger pistons, but there are useful to fix damaged bores..
Free bump for you...great looking engine...love those power levels
<<<<GLWS>>>>

[dreek93sr20]

I will be lookin into buyin this from you....give me a lil time to think things over and make sure everything falls in line....but i think i may go with you on this one bro...:bigok:

[young13]

not if I can get him to sell me the block and oil pan first hahahahah I can't push 470 on a stock bottom end for long and my boost is turned down, gotta love E85 . :drool:

[Imarvin240]

currently no one has put any money out for the engine, tons of interest though...but that seems to be the extent of it hah. this is a quality engine with low miles for a great price...pick it up!

[Imarvin240]

last try to sell it...if it isn't sold by the end of March, its becoming a back up engine.

[drifter_for_life06]

glws. Im doing the same type of build. I've got $8k in parts, and still have a few more things to get, plus the machining. I'll end up easily at $10k+

[jkjunior]

My Old Motor....I miss you!

[Imarvin240]

hah this is an old thread guys...mods please lock.