S13 Tein coilovers | Brembo rear calipers | DCC sensors | MAF

[edmorl]

Full set of Tein HA coilovers for s13's. One of the fronts is leaking but could be rebuilt at a suspension shop (left in the picture). Fronts have camber plates

SOLD
http://s18.postimage.org/4si7yw82h/IMG_0772.jpg

s13 MAFs for KA24E (single cam) and sr20. Comes with pigtail

SOLD
http://s17.postimage.org/r6tgvvpov/IMG_0672.jpg

s13 & s14 Digital Climate Control (DCC) sensors.
sunload sensor, inside temp sensor, outside temp sensor

20$ EACH shipped, buy more then 1 and I'll cut you a deal
http://s17.postimage.org/gubrnjljj/IMG_0074.jpg

Mitsubishi EVO 8 rear brembo calipers with hardware (shims) and some brake pads in there

300$ + shipping
http://s7.postimage.org/63i4esyyj/IMG_0774.jpg
http://postimage.org/image/9r5qdfbv9/

[edmorl]

Coilovers are gone! the rest is still available

[s13turbo]

Will the evo brakes fit on the back of a s13? What is needed

[edmorl]

Will the evo brakes fit on the back of a s13? What is needed

It's been done before. You either have to go to machine shop and get a bracket made or you can drill through the caliper and bolt it like that.

[RxGlassjaw]

good stuff bump

[edmorl]

Bump, still have some stuff left

[RxGlassjaw]

Coilovers arrived! Thanks!

[edmorl]

Bump mafs sold.