Clutch Problem

[Agustin R]

hey , anyone can help me , my clutch pedal is too high on my 240sx '89, hydraulic clutch, any help to lowere it will be apreciated:hammer: :hammer:

[Evil S14]

im gonna have to break out the pic again

http://portfolio.iu.edu/jrjimene/Carz/109-0989_IMG.jpg

see that thing highlighted there

the nut begind that bracket is a locknut, use a 12 mm open end to loosen it, then (depending on how siezed your bracket is) to can take a pair of pliars and rotate the whole pushrod, rotating it counter clockwise will lower the pedal doen, but allso make the clutch grab alot lower. If you also look just in front of the pedal under the dasd, there is a 14mm bolt with a locknut that acts as a stopper for the pedal, screw that in more and itll lower the pedal as well