S14 RUCA bolt

[2.5T_/<ouki]

Purchased some rucas and they didn't come with long enough bolts. These are the most outer bolts on the ruca where it connects to the knuckle

Anyone know the bolt, bolt size?

Thanks

[2.5T_/<ouki]

Anyone?
I would love to put these on!

Thanks

[blktopsr20]

why not use the stock one??

[teh smithers]

I was able to re-use my stock outer bolts. If those don't work:

A) Call your local Nissan dealer and see if they can help you out.

B) Go to the hardware sto' with the bolts you have and eyeball that shit. Make sure you get the proper grade (I'm pretty sure it's 8 or higher).

Also, if you haven't replaced your stock eccentric bolts with these, I'd highly recommend that you do so.

SPL Eccentric Lockout Kit (http://www.enjukuracing.com/products/SPL-Eccentric-Lockout-Kit-for-S14.html)

[jacobzking]

should be part 01111-S14004

$5, just go buy pine at any local nissan dealer

[2.5T_/<ouki]

Stock bolt is not long enough. These CX racing
Rucas are a bit thicker than stock where it bolts to the knuckle.

Thanks for the recommendations guys. Was hopig to find the size! Guess I'll compare at the local hardware shop.

[Motary]

I've got another question about these, why is there a huge weight hanging on the bolt?

[2.5T_/<ouki]

I've got another question about these, why is there a huge weight hanging on the bolt?

A weight?
Are you referring to the odd looking washer? I believe it's some sort of locking mechanism. It has a little "hook" on it which locks into the bolt.

[ill.]

It is the eccentric bolt for factory adjustment. The "weight" is to make the adjustment scale viewable from its weird position under the car