View Full Version : Need help Sr20det wiring harness part numbers
gunmetalr32
12-14-2011, 10:26 PM
I was working on my 180sx and I was trying to find out why it won't get spark I was tryingto look up what harness was on the motor. The part number is 24011 50F20 I can't find anything on that part number I think it is a type x wiring harness. Any info would help
driftbreads13
12-14-2011, 10:36 PM
check ignitor with test light
gunmetalr32
12-14-2011, 10:46 PM
I did that I have 2 and they both work..
Here is the story.. I got a 180sx with a black top without a ecu. And I hooked everything up and i plugged in a black top ecu and no spark. Everything else works. Fuel pump primes and it cranks.. But I don't get spark. I get power and I have a ground but no signal. Leads me to..i might have a type x
Touge180sx
12-14-2011, 10:58 PM
Just check the pinout on the ecu plug and match up wire colors, pretty easy to figure out which harness you have, That harness sounds like earlier blacktop/redtop not type-x to me though.
gunmetalr32
12-14-2011, 11:09 PM
the chassis i have is a 96-97 i plugged in a red top ecu 62 and it still wouldn't turn over. and a black top e5 ecu and same thing
gunmetalr32
12-14-2011, 11:16 PM
i know you can re pin the J4 harness to work with early type ecu's.. i just want to make sure it was a J4 harness
http://i185.photobucket.com/albums/x303/aschanne/62toJ4.jpg
JDMRIDDAZ
12-15-2011, 10:17 AM
Coilpacks have power?
gunmetalr32
12-15-2011, 10:19 AM
not while cranking
gunmetalr32
12-15-2011, 10:21 AM
is there any thing on type x motor that is different than a black top motor.. so i can check
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.