joemon
11-27-2011, 01:01 PM
my 91 ka24de all stock the other day while i was driving started misfiring while going home.
symptoms are:
really rough idle
great loss of power
sounds like a sti
little white smoke out the tail pipe
no check engine light on
i checked and adjusted timing back to stock
getting all spark (but noticed my spark plugs black)
no arcing in spark plug wires (good)
dizzy good working order
coil good working order
next i pulled plugs out with car on and cyl#4 had no change
next i checked the injector wire plugs and all were plugged in
so i pulled each off with car on and again no change in cyl#4
next i checked the resistants of each plug and plugs 1-3 all resistant except #4
so all testing is pointing to cyl#4 injector...
now im asking is it just the wire bad (power from ecu or ground)
or
bad injector mechanicly not in working order..
if its a wireing problem can some1 direct me to a wiring diagram for the wiring of the injector
or
another way to patch this up for now (wire bypass or splicing to another wire)
yes i have searched here and google and other 240sx sites
any help would b nice
-thanx guys
symptoms are:
really rough idle
great loss of power
sounds like a sti
little white smoke out the tail pipe
no check engine light on
i checked and adjusted timing back to stock
getting all spark (but noticed my spark plugs black)
no arcing in spark plug wires (good)
dizzy good working order
coil good working order
next i pulled plugs out with car on and cyl#4 had no change
next i checked the injector wire plugs and all were plugged in
so i pulled each off with car on and again no change in cyl#4
next i checked the resistants of each plug and plugs 1-3 all resistant except #4
so all testing is pointing to cyl#4 injector...
now im asking is it just the wire bad (power from ecu or ground)
or
bad injector mechanicly not in working order..
if its a wireing problem can some1 direct me to a wiring diagram for the wiring of the injector
or
another way to patch this up for now (wire bypass or splicing to another wire)
yes i have searched here and google and other 240sx sites
any help would b nice
-thanx guys