Gobble Gobble Part out *SR* *S13* *N' Stuffs*

[Josh]

Updated a few prices

Everything that is engine specific is for an SR. Most is OBO, OBO does not include shipping. I'm not in a rush so lowballs will be ignored, however I am open to negation, possibly interested in trade though no car stuff (I am big into cycling so if you have cycling shit, maybe). Ask as many questions as you want, I will answer everything. If you want better pictures of a specific item please PM me. There is a lot more stuff that I will eventually post once some of this stuff is sold. If you see something that I have overpriced, no need to trash the thread, please PM me with a valid link where it can be found cheaper and I will adjust my price accordingly.

NOTE: in some of the images there are still sensors attached, they will NOT come with the item.


BNIB Painless 50003 $350shipped
http://media.ziptied.com/members/files/141/sell/painless1.JPG
http://media.ziptied.com/members/files/141/sell/painless2.JPG

FIA legal 6-point $75shipped
http://media.ziptied.com/members/files/141/sell/racequip.JPG

NGK wideband $150shipped
http://media.ziptied.com/members/files/141/sell/wideband.JPG

Bulleye Power S256 w/ oil lines $800shipped /w downpipe & straight pipe w/ flex $950+shipping w/heat shield $1000+shipping
http://media.ziptied.com/members/files/141/sell/t1.JPG
http://media.ziptied.com/members/files/141/sell/t2.JPG
http://media.ziptied.com/members/files/141/sell/t3.JPG
http://media.ziptied.com/members/files/141/sell/t4.JPG
http://media.ziptied.com/members/files/141/sell/t5.JPG
http://media.ziptied.com/members/files/141/sell/t6.JPG

5MM slip on $20shipped
25mm bolt-ons $100shipped
Clutch master & slave w/line $100shipped
http://media.ziptied.com/members/files/141/sell/susp.JPG

Tanabe Sway Bar $150OBO
Cusco Strut $100OBO
http://media.ziptied.com/members/files/141/sell/cusco.JPG

Dust Shield $30
http://media.ziptied.com/members/files/141/sell/dust.JPG

Electromotive Tec3r $2000OBO
Included:
Required sensors
Mag Bracket
ATI Dampener w/trigger wheel
DFU's with plug wires and mounting bracket
Wiring harnesses
Serial cable w/pc card
http://media.ziptied.com/members/files/141/sell/electro.JPG


Flexalit 2x12's $200OBO
http://media.ziptied.com/members/files/141/sell/fans.JPG

S13 Mirrors :) $150OBO
http://media.ziptied.com/members/files/141/sell/ganador.JPG

I would rather not part this out because it is all wired but will if there is interest in separate gauges. Empty space was a Yosh Water Temp. Um.. Make me an offer?
Included:
STRI Oil P, Oil T, Boost
AutoMeter Fuel Level
Stew Warn Digitial Tach
http://media.ziptied.com/members/files/141/sell/gauges.JPG

Spec-M IC modified to be run as a midmount $250OBO
http://media.ziptied.com/members/files/141/sell/ic1.JPG
http://media.ziptied.com/members/files/141/sell/ic2.JPG
http://media.ziptied.com/members/files/141/sell/ic3.JPG


Full Race Mani $800shipped
Tial WG $200shipped (comes with dump)
Both $975shipped
http://media.ziptied.com/members/files/141/sell/maniwaste.JPG


NRG Quick Release $75shipped
http://media.ziptied.com/members/files/141/sell/nrg.JPG

NOTE: All 'shipped' is for INCONUS ONLY! Eskimo? Canuck? Etc? Ask for a shipping quote.

[Big Zee]

PM'd about the BV Arms

[Josh]

Bump

Sent from my ADR6300 using Tapatalk

[Spoolin fourty]

DAMN GREAT prices wish i had the cash free bump!!!!

[Sliderintrainin]

still have starter? i sent a message with my number.thanks

[1gr8bar10der]

Where in FL are you located?

[Josh]

still have starter? i sent a message with my number.thanks

replied

Where in FL are you located?

orlando

[Briou]

are you selling the ps pump??

[tommytwo40hands]

interested in the tein outers and other suspension parts...will be sending you a pm.

[Dsic240sx]

how can you run the intercooler as a sidemount? pics please. i might be very interested.

[Josh]

interested in the tein outers and other suspension parts...will be sending you a pm.

all the battleversion components are sold, sorry. tein outters are still available


how can you run the intercooler as a sidemount? pics please. i might be very interested.

never said anything about sidemount, midmount

here are some pics I dug up real quick, sorry for shitty cell quality, they are like 6 months old.

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/217299_10150151194546317_508146316_6775618_2912660 _n.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196506_10150107431291317_508146316_6544587_5695762 _n.jpg

are you selling the ps pump??

yes, I have a full AN line system + cooler (same as oil cooler setup just smaller cooler). I have to find the HP line in my garage though. I will sell the pump alone but you will not get the AN fitting adapters.

[240canni]

hey pmed you about the sparco just give me a call thanks

[Josh]

hey pmed you about the sparco just give me a call thanks

Didn't get a pm from you bud.

Sent from my ADR6300 using Tapatalk

[240canni]

i know im sorry i sent a visitor message, i just sent the pm, my bad

[zz_kouki_zz]

Hey Josh pm me your contact number I need some parts from you, also live in Orlando :)

[Briou]

how much for the ps pump with all the an lines?

[Josh]

how much for the ps pump with all the an lines?

all lines to include the cooler/fan setup?

[lightsource]

Is that a rear or front sway bar?

[Briou]

no just the pump and the steering lines themselves...no cooler or cooler lines

[Josh]

Is that a rear or front sway bar?

front


no just the pump and the steering lines themselves...no cooler or cooler lines

let me find the high pressure line first then Ill get back with you

[DallasTXjdm]

You got a PM

[tommytwo40hands]

tien outers sold to me...thanks man

[Briou]

let me find the high pressure line first then Ill get back with you

Ok thanks man...If you can't find it i will take the pump by its self....and you wouldn't happen to know if those PE injectors work with the greddy top feed fuel rail?

[Josh]

Ok thanks man...If you can't find it i will take the pump by its self....and you wouldn't happen to know if those PE injectors work with the greddy top feed fuel rail?

They do. I will also include the clip pigtails if you want them.

[Briou]

maybe we could work out a package deal for the injectors and ps pump??

[Josh]

maybe we could work out a package deal for the injectors and ps pump??

Im sure we can come to a deal, ill get with you tomorrow after I look around in the garage for that line.

[GTR_240SX]

You still have the the Z32 Ebrake assembly I'm interested in the rear brakes and ebrake assembly...

[Josh]

You still have the the Z32 Ebrake assembly I'm interested in the rear brakes and ebrake assembly...

I do. PM me.

[Briou]

ok take your time I'm in no rush really...I probably won't be back on her until newt week anyway...I'll hit you up then!!

[gunmetalr32]

all the battleversion components are sold, sorry. tein outters are still available




never said anything about sidemount, midmount

here are some pics I dug up real quick, sorry for shitty cell quality, they are like 6 months old.

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/217299_10150151194546317_508146316_6775618_2912660 _n.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196506_10150107431291317_508146316_6544587_5695762 _n.jpg



yes, I have a full AN line system + cooler (same as oil cooler setup just smaller cooler). I have to find the HP line in my garage though. I will sell the pump alone but you will not get the AN fitting adapters.
loving the mid mount set up

[Style]

looks like you have Cusco mounts, cause they look exactly like what im using

[Spoolin fourty]

did this sell?

[Josh]

looks like you have Cusco mounts, cause they look exactly like what im using

that's what I thought they were

did this sell?

did what sell?

[SupaDoopa]

Price on gauge setup, please. 02771. PM me!

[Josh]

Bump#2 Price drop.

[Briou]

Hey man did you find that high pressure line for the ps set up??

[whiteashes]

interested in the Full Race exhaust mani, txt me @ (408) 693-4183. Do you have the reciepts or better pics to verify?

[Josh]

Hey man did you find that high pressure line for the ps set up??

no, i didnt, sorry been a hectic weekend, if you still want the pump only, PM me


interested in the Full Race exhaust mani, txt me @ (408) 693-4183. Do you have the reciepts or better pics to verify?

done

[Josh]

bump accepting reasonable lowballs

[Mike - E]

you have pms sir

[epics13]

is the radiator still for sale f so better pics of both sides plz

[Mike - E]

Pulleys sold to me. Pmd sir

[Mike - E]

payment sent for koyo :)

[Tkwjh07]

Are you selling the steering wheel too?

[Josh]

Are you selling the steering wheel too?

for the right amount possibly... PM me

[Josh]

Everything is now on ebay train2tri | eBay (http://www.ebay.com/sch/train2tri/m.html?item=320818046579&viewitem=&sspagename=STRK%3AMESELX%3AIT&vxp=mtr&_trksid=p3984.m1555.l2649&_trksid=p4340.l2562)

PM me here if you would still like to work out a deal, I would be happy to delist anything.

[paulseatingabook]

bump still have ngk wideband?

[Josh]

bump still have ngk wideband?

no sorry, sold it two days ago

[Mike - E]

how about that cusco pulley?, pm me