PDA

View Full Version : DOC Race Turbo Manifolds IN-STOCK~


T.O.D.
11-14-2011, 04:53 PM
DOC Race is a new sponsor to Zilvia and would like to bring our High Quality Turbo Manifolds to the community. We offer many different manifolds including our KA24DE and SR20DET Turbo Manifolds. We also offer 6 cylinder manifolds for both the RB and 2J engines. We have spent years developing our manifolds and designing the merge collectors to get the most performance from your engine tuning.

DOC Race has a wide range of applications in-stock ready to ship. For custom orders we have a lightning fast turnaround time so no delay on your project.

All of our manifolds are schedule 40 stainless steel. The materials and the welding process used ensure no cracking, we still offer a two-year warranty even though our manifolds have been known to outlive the vehicle.

When the manifold has been assembled and welded, it is put through a final port and polish process to maximize exhaust flow.

We also Build Custom Intercoolers for people wanting to make the most horsepower and not heat soak once you actually do a pull. Our intercoolers are not Ebay cores, they are used in extreme conditions for people pushing the limits of there setup....

http://i1217.photobucket.com/albums/dd383/Doc_Race/TylerS13/DOCV-Mount.jpg
PM FOR PRICING AND SHIPPING QUOTES!!!!

We will be updating this section with our products. If you have any questions or concerns regarding a product feel free to email us @ [email protected] or call us anytime @ 503-473-1763.

TOYOTA 2JZ T4 TWINSCROLL

http://i1217.photobucket.com/albums/dd383/Doc_Race/2JZ_Twinscroll-1.jpg

TOYOTA 2JZ OPEN T4 SINGLE 44MM

http://i1217.photobucket.com/albums/dd383/Doc_Race/2JZ_T4open.jpg

TOYOTA MR2/CELICA T3 TOPMOUNT MANIFOLD (MVS WASTEGATE)

http://i1217.photobucket.com/albums/dd383/Doc_Race/MR2Topmount.jpg
http://i1217.photobucket.com/albums/dd383/Doc_Race/MR2Topmount_2.jpg

MAZDA 13B T4 TOPMOUNT MANIFOLD

http://i1217.photobucket.com/albums/dd383/Doc_Race/13B_Open2.jpg

MAZDA MIATA T3 TOPMOUNT MANIFOLD

http://i1217.photobucket.com/albums/dd383/Doc_Race/MiataTopmount.jpg
http://i1217.photobucket.com/albums/dd383/Doc_Race/MiataTopmount_2.jpg

HONDA S2000 T3 BOTTOM-MOUNT RAMHORN MANIFOLD

http://i1217.photobucket.com/albums/dd383/Doc_Race/S2000Ramhorn.jpg
http://i1217.photobucket.com/albums/dd383/Doc_Race/S2000Ramhorn_2.jpg

HONDA S2000 ANNIHILATOR TOPMOUNT

http://i1217.photobucket.com/albums/dd383/Doc_Race/S2000Anhialator.jpg
http://i1217.photobucket.com/albums/dd383/Doc_Race/S2000Anhialator_2.jpg

HONDA K SERIES T3/T4 SIDEWINDER

http://i1217.photobucket.com/albums/dd383/Doc_Race/KSERIES_T4_3-1.jpg

HONDA B SERIES MINI-RAM BOTTOM MOUNT

http://i1217.photobucket.com/albums/dd383/Doc_Race/B_Miniram.jpg

HONDA B SERIES A/C RAMHORN MANIFOLD

http://i1217.photobucket.com/albums/dd383/Doc_Race/B_ACram.jpg

HONDA B SERIES RAMHORN

http://i1217.photobucket.com/albums/dd383/Doc_Race/B_Ramhorn_MVR.jpg
http://i1217.photobucket.com/albums/dd383/Doc_Race/B_Ramhorn_MVR2.jpg
....ALSO AVAILABLE WITH THE TEARDROP WASTEGATE OUTLET
http://i1217.photobucket.com/albums/dd383/Doc_Race/BRamhornMVRTeardropClose.jpg

HONDA B SERIES TWINSCROLL T4 TOPMOUNT (GT42R)

http://i1217.photobucket.com/albums/dd383/Doc_Race/B_Twinscroll.jpg

HONDA B SERIES T4 TOPMOUNT

http://i1217.photobucket.com/albums/dd383/Doc_Race/B_Topmount.jpg

HONDA D SERIES RAMHORN

http://i1217.photobucket.com/albums/dd383/Doc_Race/D_Ramhorn.jpg

HONDA D SERIES TOPMOUNT

http://i1217.photobucket.com/albums/dd383/Doc_Race/D_Topmount_1-1.jpg

HONDA H22 BOTTOM-MOUNT MANIFOLD

http://i1217.photobucket.com/albums/dd383/Doc_Race/H22_Bottommount.jpg
http://i1217.photobucket.com/albums/dd383/Doc_Race/H22_Bottom2.jpg

EVOLUTION 8/9 STOCK REPLACEMENT MANIFOLD

http://i1217.photobucket.com/albums/dd383/Doc_Race/EvoStockReplacement_1.jpg
http://i1217.photobucket.com/albums/dd383/Doc_Race/EvoStockReplacement_2.jpg

EVOLUTION 8/9 T3 BOTTOM-MOUNT MANIFOLD

http://i1217.photobucket.com/albums/dd383/Doc_Race/EvoT3.jpg
http://i1217.photobucket.com/albums/dd383/Doc_Race/EvoT3_2.jpg

EVOLUTION X CAT-BACK EXHAUST

http://i1217.photobucket.com/albums/dd383/Doc_Race/EvoXCat-back_2.jpg
http://i1217.photobucket.com/albums/dd383/Doc_Race/EvoXCat-back.jpg

NISSAN SR20DET T4 FRONT-FACING MANIFOLD

http://i1217.photobucket.com/albums/dd383/Doc_Race/SR20DETT4_2.jpg
http://i1217.photobucket.com/albums/dd383/Doc_Race/SR20DETT4_3.jpg
http://i1217.photobucket.com/albums/dd383/Doc_Race/IMG_20111120_144640.jpg

NISSAN SR20DET T3 TOPMOUNT MANIFOLD

http://i1217.photobucket.com/albums/dd383/Doc_Race/SR20T3Badged.jpg

NISSAN SR20DET T25 STOCK REPLACEMENT (HIGHEST QUALITY BOTTOM-MOUNT AVAILABLE)

http://i1217.photobucket.com/albums/dd383/Doc_Race/New%20Product%20Pics/SR20T25_Fresh.jpg

NISSAN KA24DE T3 TOPMOUNT MANIFOLD

http://i1217.photobucket.com/albums/dd383/Doc_Race/KA24DE_1.jpg

DOC RACE CUSTOM INTERCOOLERS

http://i1217.photobucket.com/albums/dd383/Doc_Race/Intercoolers.jpg
24X12X3 CORE...
http://i1217.photobucket.com/albums/dd383/Doc_Race/24x12x3.jpg
20X12X3 (BACK-DOOR INTERCOOLER)
http://i1217.photobucket.com/albums/dd383/Doc_Race/20x12x3.jpg
CUSTOM ORDERS AVAILABLE, CONTACT FOR MORE INFORMATION....


PM Me or email me @ [email protected]

MadScientist
11-14-2011, 05:34 PM
Twin Scroll?
if not Twin Scroll maybe a V-band outlet?
A/C Compatible Top Mounts?

Dustxking
11-14-2011, 05:37 PM
Seen products in person. Top notch products!

T.O.D.
11-14-2011, 05:45 PM
Twin Scroll?
if not Twin Scroll maybe a V-band outlet?
A/C Compatible Top Mounts?

We offer twinscroll in most of our manifolds, also V-band. Which manifold specifically?

MadScientist
11-14-2011, 05:47 PM
We offer twinscroll in most of our manifolds, also V-band. Which manifold specifically?

S14 SR20 Top Mount T3

slickdrifter
11-14-2011, 05:53 PM
Excellent customer service and awesome products... Ordered a manifold and they gave me updates, they built n shipped it out super quick. The customer service and sales rep Tyler, was really helpful with my questions about turbo sizing, injector sizing and whatnot., and hooked me up with a Precision turbo that met my goals and for a great price. I also purchased a custom intercooler from them which im super pleased with, my car had heat soak issues, and with their new core I was able to make more power with less boost, and could run my car at the track longer without heatsoak issues. Ill be dealing with them for sure on my next project!

T.O.D.
11-14-2011, 06:00 PM
S14 SR20 Top Mount T3

SR20DET Topmount is A/C and P/S friendly. I can do the first manifold listed (SR20 Topmount) with a V-band flange on it for $745 shipped. You will be able to make well over 600whp on this topmount manifold and have a V-band option.

The SR20DET T4 Front Facing manifold is our design that is also offered in twinscroll. The twinscroll Front Facing manifold is $1,045.

Let me know if you have any other questions!

memphis180sx
11-14-2011, 06:06 PM
ahh makes me want to buy a big turbo just to use this manifold

Umbys
11-14-2011, 06:16 PM
wow these manifolds are bad to the ass. Id def get one in the future

omgRWDgoodness!
11-14-2011, 06:24 PM
Any plans for a bottom-mount/stock location RB25DET manifold?

chris300zr
11-14-2011, 07:03 PM
Rb25 manifold ac friendly and is the rb twin scroll manifold same price as listed?

T.O.D.
11-14-2011, 07:08 PM
Any plans for a bottom-mount/stock location RB25DET manifold?

Don't have one available for the factory turbo positioning yet. We typically do external wastegate setups which work best with the topmount design. Let us know if you want to upgrade the turbo, we have a topmount for you!

T.O.D.
11-14-2011, 07:22 PM
Rb25 manifold ac friendly and is the rb twin scroll manifold same price as listed?

The RB twinscroll is $100 more with dual wg outlets into a single MVR flange.

You might need to make custom lines for a/c.

huffandpuff00
11-14-2011, 10:25 PM
the mani's look great...

blackghost13
11-15-2011, 01:24 AM
they are so awesome seen in person and are far superb than the pictures. this will be my future manifold :)

evo9ben
11-15-2011, 10:34 AM
i made 580 whp on 26 psi on my evo.

T.O.D.
11-15-2011, 12:11 PM
We got most of the applications in-stock. Come and get em when your ready guys!

You get bigger injectors Ben? If I remember correctly you were out of fuel?

Tearlessj
11-18-2011, 01:20 AM
Pictures of the 2jz manifold installed?

T.O.D.
11-18-2011, 09:28 PM
http://i1217.photobucket.com/albums/dd383/Doc_Race/DSC_0012.jpg

Imarvin240
11-19-2011, 04:34 PM
great looking manifolds. do you guys offer any type of coatings? ceramic?

Imarvin240
11-19-2011, 08:09 PM
also, do you guys plan on doing an sr20ve-t manifold?

T.O.D.
11-21-2011, 01:51 PM
We don't offer an coating but you can on your own. The manifolds are designed to withstand ceramic coating.

No VE manifold at this time, definitely looking to build one though.

Volcom887
11-27-2011, 10:28 PM
these manis are beautiful man A+ for them

T.O.D.
11-28-2011, 12:20 PM
Thanks! Manifolds in-stock ready to ship

12-09-2011, 01:25 PM
photobucket fail...fix pictures please

T.O.D.
12-13-2011, 12:25 PM
Should be visible s13_kidd I fixed it

taeisbeast
12-13-2011, 12:35 PM
Wonderful top notch mani's

T.O.D.
01-06-2012, 06:08 PM
Take your project to the next level for 2012

Seraphim38
01-07-2012, 07:46 PM
please PM me a price on a T25 bottom mount SR20DET, and I so wish that there was an external wastegate option!

T.O.D.
01-08-2012, 08:25 PM
PM's and tracking numbers sent

josephin510
01-09-2012, 10:47 AM
No RB25 or 1jz luv??

T.O.D.
01-09-2012, 04:58 PM
No RB25 or 1jz luv??

The 1J flanges are being machined this week! It will almost mirror our existing 2JZ design.

As far as the RB goes:

http://i1217.photobucket.com/albums/dd383/Doc_Race/RB26T4.jpg

josephin510
01-10-2012, 10:01 PM
GOOD pricing on rb25 manifold and 1jz manifold shipped.

s13yaobling
01-14-2012, 02:23 PM
Looking for a 1jz non vvti twin scroll manifold with t3 or t4 flange shipped to 89081! thank you

T.O.D.
01-16-2012, 04:57 PM
PM's and tracking numbers sent! I'll make sure to update the progress of our Ultimate 1JZ Topmount....:hyper:

s13yaobling
01-17-2012, 10:24 AM
It is going to be epic, thanks for making one for the 1JZ, I have been looking for a quality for a long time. I'm sure I will be very happy with it.

Rob-A-Gee
01-27-2012, 09:09 PM
I would like to order the bottom mount SR20 t25 manifold.
shipped to 89086
[email protected]

thank you very much

T.O.D.
01-29-2012, 04:39 PM
PM's and tracking numbers sent!

89JDM240sx
01-29-2012, 04:52 PM
I'm building a Rb25 race motor for time attack (S13) do you have chassis specific mani's?

T.O.D.
01-29-2012, 05:16 PM
Yeah, our RB manifold clears that chassis. We have fit up to a T88 frame turbo (slightly larger then a GT40R frame) on our standard RB25 manifold.

Luvs2slide
01-29-2012, 06:00 PM
Price please for Rb25det manifolds. Also what turbo's do you have to suit drifting w/ a rb25det.

runthatsht
01-29-2012, 07:55 PM
Ka24de
38mm
Shipped to 32935
Can you do better than $695
Ready to buy

89JDM240sx
01-29-2012, 08:06 PM
Yeah, our RB manifold clears that chassis. We have fit up to a T88 frame turbo (slightly larger then a GT40R frame) on our standard RB25 manifold.

Ok thanx gonna Pm you this week some time....

T.O.D.
02-01-2012, 02:54 AM
PM's and tracking numbers sent!

We also have package deals available including our downpipe and even a turbo. Our SR20DET T3 Topmount Manifold, a 600hp capable Precision 62/62 and 3" V-band downpipe for $1,995 shipped in the Lower 48 States. (Add $175 for Recirc Dumptube Tial 38mm and 44mm flange only)

http://i1217.photobucket.com/albums/dd383/Doc_Race/SR20T3ComboRecirc.jpg

http://i1217.photobucket.com/albums/dd383/Doc_Race/SR20T3Badged.jpg

SRS13JH
02-01-2012, 03:40 AM
Is that with a ball bearing or journal bearing turbo?

Walperstyle
02-01-2012, 03:47 AM
I don't have my engine running yet, but this is a KA24DE-T manifold fitted for reference on my (hopefully) 500hp build.

http://www.supercars.net/pitlane/pics/182616/2246512d.jpg
http://www.supercars.net/pitlane/pics/182616/2246512e.jpg

T.O.D.
02-01-2012, 02:07 PM
Journal Bearing Precision 62/62, I can add the ball bearing option but it will obviously be more expensive.

I have 1 of these combo's left in-stock:

SR20DET T3 Topmount 2-bolt 38mm wg flange, 3" V-band Downpipe (Full Stainless) and the Journal Bearing Billet 62/62

T.O.D.
02-01-2012, 02:12 PM
Walperstyle looking good! Degreeing your cams and everything! Your on your way to 500hp.

Walperstyle
02-03-2012, 07:13 AM
^if I blow her up, I can still use the manifold for a 300hp rebuild, lol.

imotion s14
02-06-2012, 05:21 PM
interested in an RB25 mani pls

Seraphim38
02-06-2012, 06:10 PM
Do you have any package deals on a turbo setup with a turbo that will be less laggy than a 62/62? Based on the reading I have done, that configuration would make a dyno queen but would be super laggy for street/daily driving. Maybe a GT3071R or comparable setup? I already have a GT2871R .64AR that I am thinking of moving up from...

T.O.D.
02-08-2012, 10:52 PM
PM's sent, we can get any turbo combo you guys need just leave an extra week for shipping.

http://i1217.photobucket.com/albums/dd383/Doc_Race/DSC00170.jpg

T.O.D.
03-05-2012, 07:42 PM
PM's and tracking numbers sent!

http://i1217.photobucket.com/albums/dd383/Doc_Race/Website%20Pics/13BTwinscrollFlangeGIF.gif

cole d
03-15-2012, 03:12 PM
Do you offer a manifold for 1jz/vvti?

slowvia
03-16-2012, 03:15 PM
You guys are in Portland?
How much for the sr20 bottom mount t-25 picked up?

cole d
03-17-2012, 08:18 AM
PM's sent, we can get any turbo combo you guys need just leave an extra week for shipping.

http://i1217.photobucket.com/albums/dd383/Doc_Race/DSC00170.jpg

Interested in how you guys setup the coolant overflow tank. Looks like you converted it to a radiator breather tank?

T.O.D.
03-19-2012, 04:15 PM
Do you offer a manifold for 1jz/vvti?

We have a couple versions including the Twinscroll for the 1J
1JZ Twinscroll Topmount - $1,795.00 : Zen Cart!, The Art of E-commerce (http://www.docrace.com/index.php?main_page=product_info&cPath=35_62&products_id=121&zenid=ff36e9b6ef35fd8d89072a7420440731)

Also: The coolant expansion tank is for extra capacity and for properly filling/burping the system.

Slowvia: $495 p/u

PM's and tracking numbers sent!

Imarvin240
03-19-2012, 06:09 PM
kind of off topic since its a nissan forum, but im sure people own more then just a nissan hah. I didn't see it on the website, but do you guys plan on doing anything for a subaru?

cole d
03-23-2012, 10:39 AM
We have a couple versions including the Twinscroll for the 1J
1JZ Twinscroll Topmount - $1,795.00 : Zen Cart!, The Art of E-commerce (http://www.docrace.com/index.php?main_page=product_info&cPath=35_62&products_id=121&zenid=ff36e9b6ef35fd8d89072a7420440731)

Also: The coolant expansion tank is for extra capacity and for properly filling/burping the system.

Slowvia: $495 p/u

PM's and tracking numbers sent!

PM sent about the coolant expansion tank. You do realize that the 1jz and 1jz/vvti use 2 different exhaust flanges they are not interchangeable?

Loganpsd
03-24-2012, 08:11 PM
How muck hp can your bottom mount sr20 t25 manifold support, and could u give me a price on one
Thanks

semajnworb
03-25-2012, 11:25 AM
I am looking for a bottom mount twin scroll T3 for my RB25det.
P.M. me

T.O.D.
03-27-2012, 01:10 PM
kind of off topic since its a nissan forum, but im sure people own more then just a nissan hah. I didn't see it on the website, but do you guys plan on doing anything for a subaru?

Nothing for the Subaru Engine's at this time.

cole d: PM sent back about the expansion tank. On the 1J engine, we just recently developed this manifold so it has only been designed with the non-vvti at the moment. If you want to get the vvti version pm me some more info and we can see what type of time frame to get flanges made and the manifold built.

Loganpsd: The T25 bottom-mount will support as much power as any turbo that fits on it is capable of producing. $495 shipped in the lower 48 states

All other PM's replied!

Loganpsd
03-27-2012, 04:57 PM
I have a gtx3076r, will it b able to flow than kind of power

T.O.D.
03-27-2012, 05:41 PM
This is an internal-gate manifold setup with a T25 flange, the GTX3076 combo'd with our T3 Ramhorn will give the best results with an external MVS or MVR gate

Sheldon Rozon
03-27-2012, 11:37 PM
make a bottom mount for kade? t3 with 44mm wastegate too lol?

T.O.D.
03-29-2012, 11:37 AM
Sheldon: We have a bottom-mount for the KA that's T25 no external option.

When going to a T3 turbo and external gate our topmount manifold is best for the maximum potential of the turbo and optimum boost control.

Loganpsd
04-01-2012, 04:46 PM
Do u make a t3 twin scroll, sr20, and a down pipe to do with it?

T.O.D.
04-02-2012, 11:13 AM
We build a twinscroll version of this manifold...
http://i1217.photobucket.com/albums/dd383/Doc_Race/DOCSR20DET_T4.gif
http://i1217.photobucket.com/albums/dd383/Doc_Race/DOCSR20DET_T4Topmount.gif

I highly recommend the twinscroll setup in T4 divided, but if you want it T3 we can custom build it that way. The twinscroll version of this is $1,095

T.O.D.
04-17-2012, 05:21 PM
were running a special on our SR20DET High Port Intake Manifold (http://www.docrace.com/index.php?main_page=product_info&products_id=116&zenid=8de5e38172b5f17ae54d2648e8afa5f9), if you want to make a lot power for a better deal then the cast versions on the market...

http://i1217.photobucket.com/albums/dd383/Doc_Race/New%20Product%20Pics/SR20DETHighPortIntake.gif

T.O.D.
06-04-2012, 11:10 AM
Still have one SR20DET T3 Topmount with two-bolt 38mm wastegate outlet in-stock, combined with a 3" Stainless Downpipe (2.5" V-band flange) for Garrett/Precision exhaust housing.

$1,100 value

http://i1217.photobucket.com/albums/dd383/Doc_Race/New%20Product%20Pics/SR20-Combo.jpg

BlewByYou
06-10-2012, 07:08 AM
Any pictures of an Rb25 S chassis and what size down pipe can be used?

sneakerjunkie
09-25-2012, 03:51 PM
how much for NISSAN SR20DET T3 TOPMOUNT MANIFOLD shipped to 95835

JoeyTheKid
01-14-2014, 08:08 AM
http://i1217.photobucket.com/albums/dd383/Doc_Race/TylerS13/DOCV-Mount.jpg


Do you guys do custom intake manifolds like this for the KA?

gostrider
03-24-2016, 05:20 PM
rb25 v band in and 44mm out top mount..?

hererisd
05-28-2018, 02:48 AM
I bought the ka24de mvr mani and and having difficulty fitting my ps pump on. It's the 3 ribbed style ps bracket shaped like a triangle. I cut the support webbing and it cleared better but the ps banjo blot still hits the mani. I'm not running ac so I'm wondering if anybody has knowledge of a lowering bracket or something. I'm stuck lol