240sxdriftin
11-08-2011, 12:45 PM
Selling the motor out of my race car only because its time for something bigger with more power, I'd rather not build this motor because it has been so good to me haha..
anyways its a s13 redtop, probly 50k miles estimated no idea of actual miles. It runs flawlessly, never given me a hickup.
all that is included:
Motor
5 speed trans
Wiring for s13
ROM tuned ecu (Hybrid Dynamics, great tune made 300whp on 17psi)
ACT 6 puck clutch
Toda racing lightweight flywheel
S15 ball bearing turbo (was 700 new from nissan!)
Circuit Sports steel braided lines
Deatchwerks 550cc injectors
Z32 MAF
Apexi power filter
Tomei turbo elbow
Tomei coil pack cover
Greddy/ Trust 3in downpipe
Polished intake manifold
Prosport oil sandwich plate for gauges
Powered by max high mount intercooler (3 months old, was 450 new)
Koyo radiator (3 months old was 300 new)
Samco rad Hoses (with water temp sensor installed)
^^ THIS IS EVERYTHING NEEDED for a reliable 300hp sr20 swap... all that for $3200.... (theres over $3100 just in parts on this motor)
100% FIRM on this price
http://farm6.static.flickr.com/5149/5671321709_ddc89a31fe_b.jpg
I can take more pictures for serious buyers and I can upload a video of it running.
If it doesn't sell as a full setup I will part it out... but it's really the best deal to buy as a whole. DROP IT IN AND GO!!!!
anyways its a s13 redtop, probly 50k miles estimated no idea of actual miles. It runs flawlessly, never given me a hickup.
all that is included:
Motor
5 speed trans
Wiring for s13
ROM tuned ecu (Hybrid Dynamics, great tune made 300whp on 17psi)
ACT 6 puck clutch
Toda racing lightweight flywheel
S15 ball bearing turbo (was 700 new from nissan!)
Circuit Sports steel braided lines
Deatchwerks 550cc injectors
Z32 MAF
Apexi power filter
Tomei turbo elbow
Tomei coil pack cover
Greddy/ Trust 3in downpipe
Polished intake manifold
Prosport oil sandwich plate for gauges
Powered by max high mount intercooler (3 months old, was 450 new)
Koyo radiator (3 months old was 300 new)
Samco rad Hoses (with water temp sensor installed)
^^ THIS IS EVERYTHING NEEDED for a reliable 300hp sr20 swap... all that for $3200.... (theres over $3100 just in parts on this motor)
100% FIRM on this price
http://farm6.static.flickr.com/5149/5671321709_ddc89a31fe_b.jpg
I can take more pictures for serious buyers and I can upload a video of it running.
If it doesn't sell as a full setup I will part it out... but it's really the best deal to buy as a whole. DROP IT IN AND GO!!!!