Iacv question

[401imports]

I have a small problem . I have a sr red top. Ik my iacv is going but idk if this problem is from the iacv. If I get on the gas. Like use boost and then put the clutch in it will drop rpm and stall. If I drive it normal and clutch in, its fine. Only when I beat on it and push the clutch. I can give it some gas before it stalls and its fine. What could it be? Could it be the iacv? Please lmk asap its very annoying lol thanks.

[jchrisw85]

how is your bov set up? recirculated or vta? i had the same problem and i recirculated my bov... fixed the problem.

[401imports]

Um im not sure. Its a hks ssq and its on the hot pipe and I t'd off the boost line from my turbo. Im not.sure what recirculated is or the vta

[LUCKYxS13]

Since its a sr my input won't be from an sr experience. But my KA did that and I added a couple of extra grounds, it helped a little. Also it could be the plugs aren't gaped right

[TheRealSy90]

Recirculate the BOV.

Okay, so the little opening on the valve where the air comes out? That needs to go to your intake. All fixed.

[401imports]

Can I run it right behind the maf? Like there is a whole for a hose I have it plugged. Stick it there? How do I hook up a hose to the bov?

[401imports]

My friend has a sr. same bov as me and his doesnt do it. I have a tune and he doesnt. Could that be why?

[92SEric240sx]

Can I run it right behind the maf? Like there is a whole for a hose I have it plugged. Stick it there? How do I hook up a hose to the bov?


Yes, Yes, Hook it up with a "barb hose splicer fitting" from either lowes or an autoparts store and vacuum hose

Get one that is a similar size to the barb on the bov:

https://lh6.googleusercontent.com/public/D_9xyhb_cqADsOTPzedk_D0XhasdINu0pdef-TGUHvN4Mlo6ES8Jvh6HpwGaz4H2bvWHaLsimyl7AedzIfApyPT-ZzX1BXyhjz15ctfveQM0_3UacjD-_XUKZbojHK7AFny2i_DRolhFUA9i9Sl571fXwRzc14oJi4At46 hKn0uxEkKO4Pk2X7hP8B-wmhGPynm09rivnbgyqJvqsBvoQOCgdkOPxrCOheZRU1rxMM17G 86ZGlRaybUc1_p1XsSXN5nLdqYsL2Fy8fQKc5qXEhL5rKTcgy9 KKoCf8tw=s90-c