c72c
10-17-2011, 09:23 AM
~*~SOLD~*~
Location- Okinawa
Contact- pm or c72c [at] y7mail.com
Payment- Paypal Only
Once again, I have another pair of barrels for sale.
They need to be sanded/polished. One wheel has a few little dings in the lip, but no curb rash on either.
There is some glue residue from tape that was on the lip...
SSR Formula Mesh barrels - Type C
15x6.5 +10 (originally 4x114.3) but you can put whatever bolt pattern face on them.
-This is only a pair (2)
-no hardware, no valve stems.
Price $150 obo + shipping (These are very light, so shipping won't be much.)
http://a1.ec-images.myspacecdn.com/images02/138/ce86cd16475f4f75947ecaeeaa1c9c6d/l.jpg
http://a4.ec-images.myspacecdn.com/images02/127/0edebd926aca4da2a0a530c64fe6a95f/l.jpg
http://a1.ec-images.myspacecdn.com/images02/151/0d4acf13a7604a4baddb461b61b1ea73/l.jpg
http://a2.ec-images.myspacecdn.com/images02/139/54d2da4bd5d646f6a19120bcb9e31715/l.jpg
http://a2.ec-images.myspacecdn.com/images02/115/28ffffed2d3b4534b1c105bbfd0433f1/l.jpg
http://a2.ec-images.myspacecdn.com/images02/117/42acd79d1c7c4c30b809e63e679f2454/l.jpg
http://a3.ec-images.myspacecdn.com/images02/130/171af5127daf4e2a97cd6cde3ea61a76/l.jpg
NOTE-
For those of you who may want to use these to swap faces,
Formula Mesh face diameters differ between type A, B, and C.
These are type C. The face diameter is ~337mm.
If you have a Type A face, they will not fit these barrels.
I'm not sure about type B as I don't have any.
You can tell what 'Type' they are by looking at the back of the face. Where it would normally show the offset and width, there is a letter stamped between there. It will be A, B, or C.
Location- Okinawa
Contact- pm or c72c [at] y7mail.com
Payment- Paypal Only
Once again, I have another pair of barrels for sale.
They need to be sanded/polished. One wheel has a few little dings in the lip, but no curb rash on either.
There is some glue residue from tape that was on the lip...
SSR Formula Mesh barrels - Type C
15x6.5 +10 (originally 4x114.3) but you can put whatever bolt pattern face on them.
-This is only a pair (2)
-no hardware, no valve stems.
Price $150 obo + shipping (These are very light, so shipping won't be much.)
http://a1.ec-images.myspacecdn.com/images02/138/ce86cd16475f4f75947ecaeeaa1c9c6d/l.jpg
http://a4.ec-images.myspacecdn.com/images02/127/0edebd926aca4da2a0a530c64fe6a95f/l.jpg
http://a1.ec-images.myspacecdn.com/images02/151/0d4acf13a7604a4baddb461b61b1ea73/l.jpg
http://a2.ec-images.myspacecdn.com/images02/139/54d2da4bd5d646f6a19120bcb9e31715/l.jpg
http://a2.ec-images.myspacecdn.com/images02/115/28ffffed2d3b4534b1c105bbfd0433f1/l.jpg
http://a2.ec-images.myspacecdn.com/images02/117/42acd79d1c7c4c30b809e63e679f2454/l.jpg
http://a3.ec-images.myspacecdn.com/images02/130/171af5127daf4e2a97cd6cde3ea61a76/l.jpg
NOTE-
For those of you who may want to use these to swap faces,
Formula Mesh face diameters differ between type A, B, and C.
These are type C. The face diameter is ~337mm.
If you have a Type A face, they will not fit these barrels.
I'm not sure about type B as I don't have any.
You can tell what 'Type' they are by looking at the back of the face. Where it would normally show the offset and width, there is a letter stamped between there. It will be A, B, or C.