SR20/KA S13 Lower Harness HELP!

[igreek]

Solved! See below.

I realized that the SR I have did not come with a transmission harness. No biggie as most say to use the KA Lower harness anyway. So, I went and bought a KA Lower Trans Harness, printed out diagrams of both harnesses, but I still can't figure out where everything goes!

Does anyone have a diagram for an S13 swap? What goes exactly where and what's not needed? I've looked everywhere.

Below are some pictures, labeled with what I know and don't. Appreciate any help! It's the only thing holding me back!

http://img402.imageshack.us/img402/8881/1110160000.jpg

http://img217.imageshack.us/img217/7164/1110160001.jpg

[igreek]

Cracked open the S13 FSM an hour ago and figured it all out! Now I know what I can rid of, so I have a nice tucked harness. Here are the above images, but with the right places to connect them. Figured that it might help someone else too.

http://img855.imageshack.us/img855/6403/tranhar21.jpg

http://img838.imageshack.us/img838/7929/tranhar2.jpg

[rtm18990]

I assume this will only work if you have a manual ka lower harness

[1990 sr hatch]

Cracked open the S13 FSM an hour ago and figured it all out! Now I know what I can rid of, so I have a nice tucked harness. Here are the above images, but with the right places to connect them. Figured that it might help someone else too.

http://img855.imageshack.us/img855/6403/tranhar21.jpg

http://img838.imageshack.us/img838/7929/tranhar2.jpg

this helped alot thanks, but im pretty sure, and dont quote me on this the white wire with the rubber boot around it runs to the altinator, and did you have to extend anything on the lower harness? mine dident really want to reach all that well

[KiLLeR2001]

The black ground wire in the second picture goes to the back of the alternator, NOT the starter....

And also the white wire with rubber boot goes to alternator, NOT the starter.

[1990 sr hatch]

{killer2001} i was lookin at this diagram then lookin at my starter and alternator i was like wtf that cant be right, thanks for you help i need a battary and fluids then hopfully it will crank

[newkid99]

I hate to revive a dead thread but I really need to know, did you say the 4th, 5th, neutral and reverse plugs aren't needed because you are installing these on an sr20? I;m trying to figure out if I need these sensors on my KA. Help please.

[1990 sr hatch]

^^
sr20 dont need this plug, but with the ka im sure you do or else they wouldent put the connecters on the ka harness [not being a smartass it sounds like it though ha]

[KiLLeR2001]

KA/SR sensors are the same they just have different plugs. You can either throw the KA sensors into the SR transmission and use the KA harness plugs, or buy an SR lower harness, or cut the plugs and wire them directly to the harness.

[Om1kron]

I hate to revive a dead thread but I really need to know.http://www.50centloseweight.com

Simone : My 1996 240sx: Lower Harness is done dilli-yo! (http://om1kron.blogspot.com/2009/02/lower-harness-is-done-dilli-yo.html)

[tygaty]

old thread bump, you feel it be kinda like that hooking the ka to a 1jz ?