1995 Nissan 240SX *JDM Kouki*SR20DET*3076R Top Mount*Slammed*TESTING WATERS

[NickIsAZero]

I'm testing waters on my 1995 Nissan 240sx, I bought it just over a year ago & have put alot of time & money into this car. I bought it as a base model Zenki with just suspension & it's become what it is today. 95% of the parts on this car are less than 6months old, along with the paint. Here's a link to the project log so you can see what it's become: Ahhhh Nick's S14 Project Log (http://www.tamparacing.com/forums/nissan-builds-projects/673916-ahhhh-nicks-s14-project-log.html)
The car is daily driven and runs like a champ, just looking to see if there's something different out there that'll catch my interest. The car was recently tuned by Hubert at Top Dead Center in Spartanburg, SC. Made 276hp at 6.5psi. I was just looking for a good conservative tune to get me driving around on, it's very well capable of much more than that! On the stock engine/turbo setup I ran a 8.2 in the 1/8th mile, I broke into the mid/low 7's on this current setup.

Bad:
No IAC hooked up.
Smokes on decel.
Roof is dented

Mileage:
135,647 (chassis) 35,xxx'ish (motor/trans) 1,500'ish (turbo, clutch, aftermarket parts).

Engine/Drivetrain:
S14 SR20DET with 5spd transmission
Nismo motor & transmission mounts
S14 VLSD
SPL subframe bushings
Competition Clutch stage2
SPL braided clutch line
Peak Boost top mount turbo manifold
Peak Boost 3" v-band downpipe
Buddy Club Spec2 3" exhaust
Tial 44mm wastegate with v-band flange
Garrett 3076r .82 turbo
Earl's AN fittings for oil/coolant
ARP exhaust studs
ProSport turbo blanket
ProSport cylinder heat shield
JUN "style" intake manifold
Thermoshield intake manifold gasket
S13 SR20det throttle body (4mm larger)
Circuit Sports aluminum pulleys
Greddy Type-RZ blow-off valve
CXracing intercooler & piping
Megan racing intercooler
10" electric fan
Chase Bays power steering kit

Suspension/Braking:
Z32 30mm 4 piston front calipers (powdercoated)
Z32 2 piston rear calipers (powdercoated)
Z32 e-brake setup
Stoptech braided hoses (front/rear)
Work lugnuts with locks
Tien HX dual-spring coilovers
SPL RUCA
SPL front tension rods
Nismo power brace
Tien inner/outer tie-rods
Megan Racing rear tie bar

Exterior:
(all parts purchased brand new from Nissan)
Rota P45R 17x9 +15 rims with Nankang NS-1 234/45 tires
OEM Nissan rain visors
OEM kouki tail lights
OEM kouki headlights
OEM kouki corner lights
OEM kouki hood
OEM kouki fenders
OEM kouki bumper support
OEM JDM kouki front bumper cover
OEM JDM kouki rear bumper cover
OEM JDM kouki grill
OEM JDM zenki sideskirts
OEM JDM zenki rear valences
OEM JDM kouki signal lights
OEM JDM kouki foglights
VIS carbon fiber trunklid
Megan Racing carbon fiber roof spoiler
10k HID's

Interior/Electronics:
Greddy E-Manage Ultimate with MAP conversion & Boomslang harness
Wiring Specialties upper & lower harnesses
AEM tru-boost
AEM wideband
Apexi turbo timer
OEM zenki white face gauge cluster
Nissan dildo shift knob
Recaro reclining seats with slider brackets
OEM kouki rear seats
Nardi 300mm corn cob wheel

http://tdcauto.com/tdcpress/wp-content/uploads/DSC_00661-e1317055070464-650x470.jpg
http://tdcauto.com/tdcpress/wp-content/uploads/DSC_00683-650x432.jpg
http://tdcauto.com/tdcpress/wp-content/uploads/DSC_00672-650x432.jpg
http://i7.photobucket.com/albums/y260/Nickisa0/2-20-2010/DSCN0858.jpg
http://i7.photobucket.com/albums/y260/Nickisa0/2-20-2010/DSCN0859.jpg
http://i7.photobucket.com/albums/y260/Nickisa0/2-20-2010/DSCN0818.jpg
http://i7.photobucket.com/albums/y260/Nickisa0/IMG_20110402_150528.jpg
http://i7.photobucket.com/albums/y260/Nickisa0/IMG_20110402_150538.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/184106_10150742779590323_542805322_19637892_423894 2_n.jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/217472_10150545276160323_542805322_17572396_706427 6_n.jpg

$15,000 is the cash price, just really looking for a cool trade.
Don't bitch about the price, leave.

[96rbs14]

Honda s2k with some bolt ons? It's a daily driver white with red drags and red leather?

[h2obrandon]

i have cash and nicetrades if cars still available pm me

[NickIsAZero]

It's still available, but you guys gotta remember that I'm located in South Carolina. I'm not willing to drive half-way across the country.
PM me pictures & info, don't just give me some random "well I got this to trade" and expect a good reply.

[NickIsAZero]

Bump, still running like a champ. Idling better now that I've completely bypassed the IACV.

[boms]

:) bump for a friend and a fun car. very cleann

[jlwold]

Don't bitch about the price, leave.

lol awesome, this should be a forum rule

[jlwold]

how much confidence do you have in the car? make a trip to seattle washington without any epic event?

[NickIsAZero]

how much confidence do you have in the car? make a trip to seattle washington without any epic event?

I've never had an issue with the car besides rubbing through the body harness on the driver's side fender. That's now been extended & re-routed, so other than that I wouldn't expect any issues. The furthest I've taken the car is 3 1/2hrs north & back after having it on the dyno for a few hours. It's my daily driver, well maintained. Tires have more than enough thread on em, none of that (got 15% left bullshit). I don't see why it couldn't/wouldn't make it across country.

[ST(I)mpreza]

Did you paint those calipers? If so, how? I cant seem to keep the NISSAN a separate color as cleanly as you did...

[junn]

Beautiful

Trade for ls1 s13??

[Og Bobby Johnson]

bump for a clean kouki

[NickIsAZero]

Did you paint those calipers? If so, how? I cant seem to keep the NISSAN a separate color as cleanly as you did...

Had them powdercoated by a local shop called Suraco.

Shoot me pictures & info on that LS1 S13.

[Imarvin240]

really clean looking car, bump for you!

[n33sanz]

Damn i like the engine bay especially but everything looks nice......glws

[NickIsAZero]

Thanks for all the good words guys, still available.