PDA

View Full Version : ECU questions


Nismo241
12-04-2003, 04:05 AM
I have a Blitz ECU for my RB20DET. Well my ecu was acting up, sputtering and what not, and I took the top off to see what I could find out and I found a line of black on a strip of white 'paper' with contacts going through it(sorry dont know the technical name for it) but anyways, I assume it has something to do with the injectors.

Now my question is, coudl I just solder a small wire to remake the connection, or am I just SOL, and if I am SOL, is the ECU the same as a factory ECU except for the little, well fvck it, I dont remmebr the names so I'll show pics.

In this pic the white band has a black streak, it's fried, I was wondering if I could solder a wire in place of it to remake the connection, and if not, the thing in that pic with the "type Access" written on it, can that be taken out and moved to a factory ECU and still be effective.

THX and sorry for the lack of knowledge and technical terms.

TokyoDrifterXo7
12-04-2003, 01:45 PM
im not a genious when it comes to ECU but i happen to know some stuff about electronics. Yes you can soldier a wire to it. I would just soldier new wires to all of them. Dont use too big of gauge wire. Hope that helps. ;)